• 제목/요약/키워드: volume estimation formula

검색결과 28건 처리시간 0.026초

3차원 의료영상진단기기를 이용한 가상 전립선 용적 측정 (Measurement of Prostate Phantom Volume Using Three-Dimensional Medical Imaging Modalities)

  • 성열훈;주용현;최보영
    • 대한의용생체공학회:의공학회지
    • /
    • 제31권4호
    • /
    • pp.285-291
    • /
    • 2010
  • Recently, advance on various modalities of diagnosing, prostate volume estimation became possible not only by the existing two-dimension medical images data but also by the three-dimensional medical images data. In this study, magnetic resonance image (MRI), computer tomography (CT) and ultrasound (US) were employed to evaluate prostate phantom volume measurements for estimation, comparison and analysis. For the prostate phantoms aimed at estimating the volume, total of 17 models were developed by using devils-tongue jelly and changing each of the 5ml of capacity from 20ml to 100ml. For the volume estimation through 2D US, the calculation of the diameter with C9-5Mhz transducer was conducted by ellipsoid formula. For the volume estimation through 3D US, the Qlab software (Philips Medical) was used to calculate the volume data estimated by 3D9-3Mhz transducer. Moreover, the images by 16 channels CT and 1.5 Tesla MRI were added by the method of continuous cross-section addition and each of imaginary prostate model's volume was yielded. In the statistical analysis for comparing the availability of volume estimation, the correlation coefficient (r) was more than 0.9 for all indicating that there were highly correlated, and there were not statistically significant difference between each of the correlation coefficient (p=0.001). Therefore, the estimation of prostate phantom volume using three-dimensional modalities of diagnosing was quite closed to the actual estimation.

주요 수종 및 임상별 현실림의 재적생장량 곡선 추정 (Growth Curve Estimation of Stand Volume by Major Species and Forest Type on Actual Forest in Korea)

  • 윤준혁;배은지;손영모
    • 한국산림과학회지
    • /
    • 제110권4호
    • /
    • pp.648-657
    • /
    • 2021
  • 본 연구는 국가산림자원조사를 활용하여 임상별 및 주요 수종별 재적생장량을 추정하고, 연평균생장량(MAI)과 연년생장량(CAI) 등을 도출하여 벌기령을 제시하고자 수행하였다. 재적생장 추정을 위하여 Chapman-Richards 모델을 적용하였다. 도출된 임상별 재적추정식에서는 침엽수림이 가장 높은 생장을 하는 것으로 나타났다. 주요 수종별 추정식은 침엽수종(3종) 중에서는 일본잎갈나무가, 그리고 활엽수종(3종)에서는 굴참나무가 가장 높은 생장이 예측되었다. 그리고 이들 추정식은 적합도지수가 일본잎갈나무 0.32, 굴참나무가 0.21 등으로 대체적으로 낮게 나타났다. 그러나 재적 추정식의 적용 가능성을 알 수 있는 잔차도 분석에 있어서는, 일부 30년 이상의 임령에서 추정식의 추정치가 과소 추정되는 경향을 보였으나, 대부분 0을 중심으로 잔차가 고르게 분포하고 있었다. 따라서 이들 식이 우리나라 현실림의 수종들에 대한 재적을 추정할 수 있을 것으로 판단된다. 추정된 재적을 이용하여 연평균생장량을 계산한 결과, 침엽수림 중 중부지방 소나무 34년, 일본잎갈나무 35년, 리기다소나무 31년일 때 MAI가 최대시기에 도달하는 것으로 나타났다. 그리고 활엽수림에 있어서는 굴참나무 32년, 상수리나무 30년, 신갈나무 29년일 때가 최대시기임을 알 수 있었다. 또한 MAI와 CAI를 계산하여, 이들이 만나는 지점을 재적수확 최대 벌기령으로 결정하였다. 그 결과는 현재 산림청이 제시한 기준 벌기령과 큰 차이를 보이지 않아 정책자료로 활용이 가능할 것으로 판단된다.

장기만연속수수량추정모형의 실용화 연구 -우리나라 중소유역을 대상으로- (A Generalized Model on the Estimation of the Long - term Run - off Volume - with Special Reference to small and Medium Sized Catchment Areas-)

  • 임병현
    • 한국농공학회지
    • /
    • 제32권4호
    • /
    • pp.27-43
    • /
    • 1990
  • This study aimed at developing a generalized model on the estimation of the long - term run - off volume for practical purpose. During the research period of last 3 years( 1986-1988), 3 types of estimation model on the long - term run - off volume(Effective rainfall model, unit hydrograph model and barne's model for dry season) had been developed by the author. In this study, through regressional analysis between determinant factors (bi of effective rainfall model, ai of unit hydrograph model and Wi of barne's model) and catchment characteris- tics(catchment area, distance round the catchment area, massing degree coefficient, river - exte- nsion, river - slope, river - density, infiltration of Watershed) of 11 test case areas by multiple regressional method, a new methodology on the derivation of determinant factors from catchment characteristics in the watershed areas having no hydrological station was developed. Therefore, in the resulting step, estimation equations on run - off volume for practical purpose of which input facor is only rainfall were developed. In the next stage, the derived equations were applied on the Kang - and Namgye - river catchment areas for checking of their goodness. The test results were as follows ; 1. In Kang - river area, average relative estimation errors of 72 hydrographs and of continuous daily run - off volume for 245 days( 1/5/1982 - 31/12) were calculated as 6.09%, 9.58% respectively. 2. In Namgye - river area, average relative estimation errors of 65 hydrographs and of conti- nuous daily run - off volume for 2fl days(5/4/1980-31/12) were 5.68%, 10.5% respectively. In both cases, relative estimation error was averaged as 7.96%, and so, the methodology in this study might be hetter organized than Kaziyama's formula when comparing with the relative error of the latter, 24~54%. However, two case studies cannot be the base materials enough for the full generalization of the model. So, in the future studies, many test case studies of this model should he carries out in the various catchment areas for making its generalization.

  • PDF

매립폐기물의 겉보기밀도와 체적환산계수의 상관관계 연구 (A Study on Correlation between Volume Conversion Factor and Apparent Density of Wastes Buried in Landfill)

  • 조진우
    • 한국지반신소재학회논문집
    • /
    • 제19권4호
    • /
    • pp.33-40
    • /
    • 2020
  • 최근 대규모 택지개발 현장에서 굴착공정 중 매립폐기물이 발견되는 사례가 빈번히 발생되고 있다. 발생된 매립폐기물을 환경적으로 처리하기 전에는 대상지역의 개발사업을 진행할 수 없으며, 매립폐기물에 대한 처리대책을 수립하여 환경적이고 경제적으로 처리하여야 한다. 본 연구에서는 매립폐기물의 처리에 있어 단가 산정의 기본적인 계수가 되는 매립폐기물의 겉보기밀도와 체적환산계수의 상관관계를 분석하고자 하였다. 이를 위하여 ◯◯지역의 사용종료 매립지 10지점에서 매립폐기물을 채취하여 물리적성상을 분석한 후, 성상별 및 혼합폐기물의 겉보기밀도를 측정하였다. 매립폐기물의 겉보기밀도와 체적 환산계수의 상관관계를 분석하기 위하여, 매립폐기물의 겉보기밀도로부터 유추한 체적환산계수와 실측한 체적환산계수, 경험식에 의한 체적환산계수를 비교하였다. 분석결과, 겉보기밀도로부터 유추한 체적환산계수, 경험식에 의한 체적환산계수, 그리고 실측한 체적환산계수는 일정한 상관관계를 나타내고 있어, 겉보기밀도와 체적환산계수에 관한 기초자료로서 활용할 수 있을 것으로 판단된다.

불규칙삼각망에 의한 지형체적 산정에 관한 연구 (A Study on the Estimation of Terrain Volume Using Triangulated Irregular Network)

  • 정인주;김상용
    • 대한공간정보학회지
    • /
    • 제11권1호
    • /
    • pp.77-82
    • /
    • 2003
  • GIS는 지금까지 여러 학계를 걸쳐서 응용단계에 접어들었으며, 특히 토목분야에서도 많은 응용을 하고 있다. GIS를 이용한 공간분석에서 지형을 정확하게 표현하는 것은 매우 중요하며 향후 3차원적 해석을 하기 위해서는 중요한 인자가 될 수도 있다. 이러한 지형을 표현하기 위해 주로 불규칙삼각망을 이용하고 있다. 따라서 본 연구에서는 불규칙삼각망에 의한 지형의 체적을 개발된 식에 의하여 산정을 하였다.

  • PDF

양구해안분지에서 기존 농업용수 이용량 산정식에 따른 양수량과 실측 양수량 비교 (A Comparison of Estimated Groundwater Consumption Using Existing Formulae with Actual Pumped Volumes in the Haean Basin, Korea)

  • 유한선;전우현;권기덕;이진용
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제22권4호
    • /
    • pp.1-8
    • /
    • 2017
  • Efficient groundwater management requires accurate information about the water volume used. The pumped volume of groundwater can be indirectly estimated using empirical formulae based on electric power consumption. The purpose of this study is to test the accuracy of this indirect method. The Haean basin in Gangwon is located in a rural area, where majority of the groundwater extracted is used for irrigation. The pumped volume of groundwater indirectly estimated from electricity usage using these empirical formulae was compared with the actual pumped volume determined by conducting experiments on April 29 and May 19, 2017. The field survey collected data on electricity usage, pumped volume, and groundwater levels. Based on this measured data, correlations were calculated between electricity usage and pumping volume, as well as groundwater level and pumping rate. The results show that electricity usage and pumped volume measured for both wells (YHE1 and YHE2) are highly correlated (r=0.99, p<0.001). However, for YHE1, notably, the correlation between the groundwater level and pumping rate was not significant, and only some correlations were identified for these variables for the YHE2 test well. The average error with respect to the estimation of the actual pumped volume from the existing formula (1) and formulae (2) and (3) are +399% and -88%, respectively. To reduce these errors, these formulae need to consider other factors affecting the pumped volume.

공적분 분석을 이용한 우리나라 수입수산물의 수요함수 추정 : 관세감축영향분석 (Estimation of Demand Functions for Imported Fisheries Products Using Cointegration Analysis: Effect Analysis of Tariff Reduction)

  • 남종오;김수진
    • Ocean and Polar Research
    • /
    • 제32권1호
    • /
    • pp.23-40
    • /
    • 2010
  • This study investigated the effects of imported fisheries products on WTO/DDA tariff negotiations. To calculate the results, the study estimated the demand functions of imported fisheries products by using unit root and cointegration approaches. These approaches allowed us to solve spurious regression problems with macro-economic variables. In addition, this study surmised the effects of change by individually imported fish products from a tariff negotiation model using price elasticities of estimated import demand function. In a process of the analysis for estimating import effects, this study found out that 39 out of 128 imported fish products had positive (+) price elasticities or did not exhibit cointegrations. To cure this problem, this study suggested that the effects of these 39 imported products be estimated with the average variation rate of import volume, rather than by the Ordinary Least Squares approach. In this study, a case-study of tariff formula with coefficient 8 based on a 'Swiss formula' for priority duty rate of 2001 and 2008 was used by to analyze the effect of change in the 128 imported fish products of both years, respectively.

제주도 삼나무 수간재적표 개발을 위한 주요 수간곡선식 비교 (Evaluation of Major Taper Equation Models for Developing a Stem Volume Table of Cryptomeria japonica in Jeju Island)

  • 김현수;정수영;이광수
    • 한국환경과학회지
    • /
    • 제31권11호
    • /
    • pp.941-950
    • /
    • 2022
  • This study was conducted to provide data and stem information to establish a local volume table of Cryptomeria japonica in Jeju Island. Stem analysis was performed on 26 trees by selecting two average trees from each site of the 13 plots of C. japonica stands in 2021 and 2022. During the analysis stage, one outlier tree was rejected, and a total of 260 observations of the specific stem height of 25 trees were used. Of the seven major taper equation models applied for parameter estimation and statistical verification, the Muhairwe 1999 model was found to be the best fit and selected as the optimal model. Stem shape-related estimates were acquired through the selected model, and sectional measurements according to the Smalian formula applied at an interval of 10 cm from the height of the stem were used to develop a volume table. A paired t-test comparison between the C. japonica volume obtained from the present study and those selected from the current yield table by NIFoS(2020), revealed significant differences (p<0.05), highlighting the necessity of a local volume table for C. japonica in Jeju Island.

중부지역 일본잎갈나무의 수간중량 추정식 개발 (Development of Tree Stem Weight Equations for Larix kaempferi in Central Region of South Korea)

  • 고치웅;손영모;강진택;김동근
    • 한국산림과학회지
    • /
    • 제107권2호
    • /
    • pp.184-192
    • /
    • 2018
  • 본 연구는 중부지역 일본잎갈나무의 수간중량 추정식을 개발하기 위하여 지역별 개체목의 지위와 직경을 고려하여 표준지를 선정한 뒤, 총 55본의 표본목을 선정하였다. 표본목의 실측자료를 이용하여 수피외생중량, 수피외건중량, 수피내 건중량 및 이용중량 등 네종류의 중량을 추정하기 위해 11개의 모형을 비교 분석하였다. 중량을 추정하기 위해 흉고직경을 변수로 이용하는 경우, 흉고직경과 수고를 이용하는 경우, 재적을 이용하는 경우의 3개 변수에 따라 모형을 구분하였다. 최적의 모형은 적합지수와 추정의 표준오차 및 잔차의 분포를 이용하여 모형의 이행능력을 비교하여 선정하였다. 그 결과, 1변수인 흉고직경을 이용하는 식은 $W=a+bD+c^D^2$이며 설명력은 90~92%를 나타냈고, 흉고직경과 수고를 이용한 2변수식은 $W=aD^bH^C$으로 97~98%의 설명력으로 2변수 모형이 1변수 모형 보다 높은 적합도를 보였다. 또한 전체수간에 대한 재적과 이용재적에 대한 식인 W = aV로 중량추정설명력이 98~99%으로 높게 나타났고 SEE도 7.7~17.5, CV(%)도 8.0~10.0으로 우세한 적합도를 보였다. 본 연구는 개체목의 중량정보 제공 및 임분단위의 중량 바이오매스추정식의 기초연구로 활용될 것으로 판단된다.

다공성 제올라이트의 특성을 이용한 기공율 추정 연구 (Porosity Estimation Using the Characteristics of Porous Zeolite)

  • 김혜지;이연숙;차진선
    • 청정기술
    • /
    • 제29권4호
    • /
    • pp.249-254
    • /
    • 2023
  • 본 연구에서는 제올라이트의 물리적 특성으로부터 기공율을 추정하는 연구를 수행하였다. 입자상 물질의 기공율 직접 측정의 어려움으로 본 연구에서는 여러 문헌에서 제시된 계산식에 제올라이트의 물리적 특성 측정값을 적용하여 기공율을 계산하였다. 이를 위해 제올라이트 3종-zeolite beta, zeolite Y, ZSM-5-에 대해 각각의 평균입자 크기 및 particle size distribution, 비표면적 및 기공특성을 측정하였으며, 가스와 액상을 이용한 진밀도, tap과 untapped를 적용한 겉보기 밀도를 측정하였다. 측정결과로부터 기공율을 계산하여 결과를 비교하고 기공율을 결정하는 주요 인자에 대해 평가하였다.