• 대한인간공학회지
• /
• 제32권4호
• /
• pp.303-308
• /
• 2013

Objective: The aim of this study is to understand health effect of hand-arm transmitted vibration. Background: Electronic vibration tools have been used in many industries. These tools evoke hand-arm transmitted vibration that cause hand-arm vibration syndrome. Method: Various papers on the hand-arm transmitted vibration and its health effects have been reviewed to know what health effect caused. Results: Hand-arm transmitted vibration causes circulatory, neural, musculoskeletal and other disturbance. Conclusion: The previous studies focused on the epidemiology and physiology for hand-arm transmitted vibration. So, now we should focus on a prevention and guideline of hand-arm transmitted vibration. Application: These results can be used to know health effect of hand-arm transmitted vibration.

• 한국운동역학회지
• /
• 제31권1호
• /
• pp.59-63
• /
• 2021

Objective: Through comparative analysis of muscle activity for whole-body vibration, walking and running movements, it is to verify the training effect of whole-body vibration exercise in terms of amount of exercise and muscle activity characteristics. Method: Flat ground walking and slope walking (10 degrees) at a speed of 5 km/h, flat ground running and slope running (10 degrees) at a speed of 11 km/h for running were performed on treadmill, and squats were maintained at 12 Hz, 20 Hz, and 29 Hz conditions on Whole body vibration exercise equipment (Galileo). Muscle activity was analyzed through EMG analysis device for one minute for each condition. Results: The Anterior Tibialis and Erector Spinae show greater exercise effect in whole-body vibration than walking and running. The Rectus Femoris, Biceps Femoris, and Gluteus Maximus have the best effect of exercise in flat running. Whole-body vibration exercise showed greater muscle activation effect as the frequency increased, and exercise effect similar to walking during the same exercise time. Conclusion: The amount of exercise through Whole-body vibration exercise was similar to that of walking exercise, and the Anterior Tibialis and Erector Spinae shows better exercise effect than walking and running.

• 소음진동
• /
• 제7권2호
• /
• pp.261-272
• /
• 1997

Recently washing machines are to be in lower vibration and lower sound because of better environment. Vibration problems in washing machines occur in both washing mode and spinning mode, but vibration in spinning mode becomes main problem because of its high rotating speed and continuity. Vibration while spinning is mainly due to rigid body motion of total washing system which includes suspending rods, washing bath, spinning bath, and gear sets. In this study, some researches were done in order to analyze the rigid body motion of washing system and flexible vibration of spinning bath. A basic mathematical model was established, and the effect of position of salt water and shape change of salt water case were considered. And the effect of lengths of suspending rods, attaching angles, vertical and horizontal position, stiffness of spring on the change of vibration were also considered. To identify the effect of salt water on vibration, some measurements were done. When salt water was positioned at upper part, the effect was most and this coincides with the tendency of simulation.

• 한국소음진동공학회논문집
• /
• 제12권8호
• /
• pp.626-631
• /
• 2002

A modified equation for the evaluation of discomfort of a seated human body exposed to differential vibration at the seat and the floor was proposed in this paper. Through the review and analysis of the preceding studies, effect of phase difference between the seat and the floor vibration on discomfort were quantitatively identified. The phase effect was shown to be governed by not only phase difference between the two vibrations but both their frequency and the magnitude, which means the present equation for the evaluation of perceptual amount of vibration provided by ISO 2631-1 should be modified. The proposed equation was developed such that the correction function was multiplied to the present equation. The correction function consisted of three parts, each of them represented the effect by phase difference, frequency and vibration magnitude on discomfort respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.146-149
• /
• 2005

Thesedays, the reduction of hand-transmitted vibration of hand-held power tools is important issue for operators' welfare, In the study, frequency response function is measured and vibration total value is evaluated for solving the principle and effect of the BOSCH's vibration-proof handle. This handle functions as a dynamic damper and has the effect, 22% vibration total value reduction under idling condition using a system that consists of a PC with data acquisition system and LabVIEW program. The program in the system makes it possible to evaluate vibration total value according to ISO 5349. This handle offers a good example for figuring out the physical contradiction between the work efficiency and operators' health.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.924-928
• /
• 2002

Response of the rail surface is an important factor for the train safety and comfortable travel, and evaluation of vibration at the area along a rail is an important factor for the vibration. The dominant method to reduce the vibration that reach the ground is installing vibration absorber between rall and the under structure. In this paper, we evaluated the vibration reducing effect of using vibration control sleeper pads to slave and earth at certain distance from the sleepers.

• Journal of Biosystems Engineering
• /
• 제37권6호
• /
• pp.359-364
• /
• 2012

Purpose: This study was conducted to analyze the vibration absorption effect for the agricultural product transportation-trailer equipped with vibration absorbable connecting hitch, leaf spring suspension, and shock absorber simultaneously (HLS), comparing with the trailer equipped with vibration absorbable connecting hitch only(H), trailer equipped with connecting hitch and leaf spring suspension (HL), and existing trailer with no vibration absorption device (E). Methods: Vertical accelerations were measured at driver seat and front, middle, rear parts of trailer bottom with no load for 4 types of transportation-trailer, and analyzed using FFT analyzer. Results: The magnitude of average vibration accelerations occurred up to 20 Hz, at this low frequencies the severe damage for agricultural products could be represented, was lower (maximum 6 times) for HLS trailer compared with H trailer. And vibration absorption effect for HLS trailer was also higher up to 40-80 Hz and 80-100 Hz, but the difference was less. At driver seat, the vibration absorption effect was high severely for HL and HLS trailer, and the magnitude of vibration acceleration was showed less difference in comparing at trailer bottom. Conclusions: From the test results, it could be recommended that the agricultural products transportation trailer should be equipped with vibration absorption device of HLS.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권2호
• /
• pp.119-126
• /
• 2022

This paper presents a method to reduce the vibration-induced noise effect of an inertial measurement device mounted on a self-driving vehicle. The inertial sensor used in the GNSS/INS integrated navigation system of a self-driving vehicle is fixed directly on the chassis of vehicle body so that its navigation output is affected by the vibration of the vehicle's engine, resulting in the degradation of the navigational performance. Therefore, these effects must be considered when mounting the inertial sensor. In order to solve this problem, this paper proposes to use an in-house manufactured vibration suppression device and analyzes its impact on reducing the vibration effect. Experimental test results in a static scenario show that the vibration-induced noise effect is more clearly observed in the lateral direction of the vehicle, but can be effectively suppressed by using the proposed vibration suppression device compared to the case without it. In addition, the dynamic positioning test scenario shows the position, speed, and posture errors are reduced to 74%, 67%, and 14% levels, respectively.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권1호
• /
• pp.80-85
• /
• 2011

For the assessment of statistical characteristics of wave loads in the real sea state, the probability distribution of wave loads are computed based on the sufficient duration of computations in irregular waves. First of all, the estimation of wave impact loads is well modified applying the displacement potential formulation, which was proposed by one of authors, for solving Wagner's flow model. Consequently, the present computation method is also modified. Prior to the computation in irregular waves, preliminary computation to determine the adequate number of realization of irregular waves is examined. The effect of hull girder vibration on the statistical characteristics is examined by means of the computation with/without hull girder vibration. It is found that hull girder vibration has a certain effect on the probability of occurrence of wave loads. Furthermore, computations taking account of the effect of operation, that is the effects of ship speed and course change, is conducted for the rational evaluation of the effects of hull girder vibration. It is clarified that the effect of operation on the statistical characteristics of wave loads is significant. It is verified that the evaluation without the effect of operation may overestimate the effect of hull girder vibration.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.27-32
• /
• 2004

Recently, the expansion of social infrastructures and urban redevelopment, the construction works have been a rapidly increase. The subway's noise and vibration are on a continuously increasing status in its importance as by the industrial and cultural development process. Nevertheless, in our country, adequate alternative idea for the construction noise and vibration are not yet established. In this point, the purpose of this study is to know the vibration effect to the structure. This study was used to determine the standard of vibration and the way of losing vibration. The case of construction site is a good example. The data of this study was obtained by a construction company in Korea. Vibration effect could cause structural problems and affect human mental state. The results of this study are as follows; check the vibrating point, determine the suitable limit of vibration, make a good plan and construction.