• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.85-91
• /
• 2014

The rotation of a spindle unit must be accurate for high-quality machining and to improve the quality of the machine tools. Therefore, the proper measurement of the rotation accuracy and ensuring a proper analysis are very important. Separate processes are necessary because spindle errors and roundness errors associated with the test balls can both factor into the measured rotation error values. We used three methods to discern test ball errors and analyzed which could be deemed as the most proper technique in a test of the rotation accuracy of the main spindle of a machine tool.

• 한국정밀공학회지
• /
• 제32권3호
• /
• pp.285-292
• /
• 2015

This paper presents a wireless ground reaction force (GRF) sensing system for ambulatory GRF recording. The system is largely divided into three parts: force sensing modules based on optical sensor, outsole type frame, and embedded system for wireless communication. The force sensing module has advantages of the low height, robustness to the moment interference, and stable response in long term use. In simulation study, the strain and stress properties were examined to satisfy the requirements of the GRF sensing system. Four sensing modules were mounted on the toe, ball, and heel of foot shaped frame, respectively. The GRF signals were extracted using Micrpcontroller unit and transferred to the smart phone via Bluetooth communication. We measured the GRF during the normal walking for the validation of the continuous recording capability. The recorded GRF was comparable to the off the shelf stationary force plate.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권2호
• /
• pp.175-178
• /
• 2005

In the present paper, we observe a relation between fuzzy norms and induced crisp norms on a linear space. We first prove that if $\rho_1,\;\rho_2$ are equivalent fuzzy norms on a linear space, then for every $\varepsilon\in(0.1)$, the induced crisp norms $P_\varepsilon^1,\;and\;P_\varepsilon^2$, respectively are equivalent. Since the converse does not hold, we prove it under some strict conditions. And consider the following theorem proved in [8]: Let $\rho$ be a lower semicontinuous fuzzy norm on a normed linear space X, and have the bounded support. Then $\rho$ is equivalent to the fuzzy norm $\chi_B$ where B is the closed unit ball of X. The lower semi-continuity of $\rho$ is an essential condition which guarantees the continuity of $P_\varepsilon$, where 0 < e < 1. As the last result, we prove that : if $\rho$ is a fuzzy norm on a finite dimensional vector space, then $\rho$ is equivalent to $\chi_B$ if and only if the support of $\rho$ is bounded.

• 한국정밀공학회지
• /
• 제34권4호
• /
• pp.243-246
• /
• 2017

In this study, flexible fixtures and end effectors are conceptually designed for the holding of thin-walled carbon-fiber reinforced-plastic (CFRP) workpieces in machining processes. Firstly, the fixture scenarios and system requirements for the conceptual designs of flexible-fixture and core units are proposed, including the propounding of the workpiece-holding mechanism and the core-unit requirements. A ball-joint pneumatic system is determined as a locking mechanism of the flexible-fixture system for the machining of thin-walled components. Secondly, conceptual designs of the core units are suggested with the driven requirements from the fixture scenarios. A self-tilting mechanism and an end-effector return mechanism are also proposed. Finally, the prototypes of the core units are manufactured, and the workpiece-holding capacity of each prototype is measured.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제25권1호
• /
• pp.49-57
• /
• 2018

We have introduced two new notions of convexity and closedness in functional analysis. Let X be a real normed space, then $C({\subseteq}X)$ is functionally convex (briefly, F-convex), if $T(C){\subseteq}{\mathbb{R}}$ is convex for all bounded linear transformations $T{\in}B$(X, R); and $K({\subseteq}X)$ is functionally closed (briefly, F-closed), if $T(K){\subseteq}{\mathbb{R}}$ is closed for all bounded linear transformations $T{\in}B$(X, R). By using these new notions, the Alaoglu-Bourbaki-Eberlein-${\check{S}}muljan$ theorem has been generalized. Moreover, we show that X is reflexive if and only if the closed unit ball of X is F-closed. James showed that for every closed convex subset C of a Banach space X, C is weakly compact if and only if every $f{\in}X^{\ast}$ attains its supremum over C at some point of C. Now, we show that if A is an F-convex subset of a Banach space X, then A is bounded and F-closed if and only if every element of $X^{\ast}$ attains its supremum over A at some point of A.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.186-189
• /
• 2001

In keeping with the needs of the times for energy and labor saving and simplifying production processes, interests has been growing in warm forging. Moreover, it is interested in increasing the material usage and production amounts. To improve the productivity and material usage, it is studied the process design of warm forging for socket. Until now, socket is manufactured by hot forging in hammer. The percentage of material usage is under $60\%$ in hammer forging. On the other han4 the percentage can be increased over $90\%$ in warm forging. To change the process from hot forging to warm forging, process designs must be performed. In this time, by using the FEM package, DEFORM-3D, we could get the shape of 1st process and minimum sealing pressure. They are very essential design data to decrease the trial and error. Practically, the overlap defect could be detected and eliminated with design modification of rib height and fillet radius. Moreover, forging load and minimum sealing pressure was defined by the 3D FEM analysis.

• 대한수학회지
• /
• 제46권5호
• /
• pp.895-905
• /
• 2009

Let $B^{n+1}$ be the unit ball in the complex vector space $\mathbb{C}^{n+1}$ with the standard Hermitian metric. Let ${\Sigma}^n={\partial}B^{n+1}=S^{2n+1}$ be the boundary sphere with the induced CR structure. Let f : ${\Sigma}^n{\hookrightarrow}{\Sigma}^N$ be a local CR immersion. If N < 3n - 1, the asymptotic vectors of the CR second fundamental form of f at each point form a subspace of the CR(horizontal) tangent space of ${\Sigma}^n$ of codimension at most 1. We study the higher order derivatives of this relation, and we show that a linearly full local CR immersion f : ${\Sigma}^n{\hookrightarrow}{\Sigma}^N$, N $\leq$ 3n-2, can only occur when N = n, 2n, or 2n + 1. As a consequence, it gives an extension of the classification of the rational proper holomorphic maps from $B^{n+1}$ to $B^{2n+2}$ by Hamada to the classification of the rational proper holomorphic maps from $B^{n+1}$ to $B^{3n+1}$.

• 대한수학회지
• /
• 제58권6호
• /
• pp.1347-1365
• /
• 2021

For µ = (µ₁, …, µ_t) (µ_j > 0), ξ = (z₁, …, z_t, w) ∈ ℂ^n₁ × … × ℂ^n_t × ℂ^m, define $${\Omega}({\mu},t)=\{{\xi}{\in}\mathbb{B}_{n_1}{\times}{\cdots}{\times}\mathbb{B}_{n_t}{\times}\mathbb{C}^m:{\parallel}w{\parallel}^2 where $\mathbb{B}_{n_j}$ is the unit ball in ℂ^n_j (1 ≤ j ≤ t), C(χ, µ) is a constant only depending on χ = (n₁, …, n_t) and µ = (µ₁, …, µ_t), which is a special type of generalized Cartan-Hartogs domain. We will give some sufficient and necessary conditions for the boundedness of some type of operators on L^p(Ω(µ, t), ω) (the weighted L^p space of Ω(µ, t) with weight ω, 1 < p < ∞). This result generalizes the works from certain classes of generalized complex ellipsoids to the generalized Cartan-Hartogs domain Ω(µ, t).

• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.75-81
• /
• 2015

본 논문에서는 2개의 패시브 소자가 임베디드된 PoP(Package on Package)용 양면 기판의 휨을 감소시키기 위해 유한요소법을 이용한 수치해석과 파라메타 설계를 위한 다구찌법이 사용되었다. 양면 회로층 두께와 솔더 레지스트 두께가 4인자 3수준으로 설계되어 파라메타 영향도가 분석되었다. 또한, 유닛 영역의 솔더 레지스트가 제거하거나 도포된 모델의 휨을 해석하여 솔더 레지스트의 영향도를 분석하였다. 마지막으로 실험을 통해 수치해석과 다구찌법에 의한 파라메타 설계의 효과를 입증하였다. 연구결과에 의하면 휨에 미치는 영향은 볼 사이드에 있는 회로층이 지배적으로 크고 칩 사이드의 회로층이 두 번째로 크며 솔더 레지스트의 영향이 가장 작았다. 또한, 칩 사이드 유닛영역의 솔더 레지스트는 도포 유무에 따른 영향도가 매우 작았다. 한편 기판의 휨은 볼 사이드 회로층의 두께가 얇을수록, 칩 사이드 회로층의 두께와 솔더 레지스트의 두께는 두꺼울수록 감소하였다.

• 한국농공학회논문집
• /
• 제57권4호
• /
• pp.11-19
• /
• 2015

The important properties of EVA (ethylene vinyl acetate) redispersible polymer was waterproof, densification of internal pore space of concrete and ball bearing and micro filler. Also, the significant role of polypropylene(PP) fiber was crack control and blockade of movement for deterioration factors. The most studies for EVA were limited in the field of mortar and PP fiber reinforced concrete had been studied in the state of being restricted unit water content, rich mix and mixing much of the fiber without considering construction site. Therefore, the control mix design were applied in ready mixed concrete using 10 % fly ash of total cement weight used in batch plant. On the basis of control mix design, EVA contents ranging from 0 % to 10 % of total cement weight and PP fiber contents ranging from 0 % to 0.5 % of EVA concrete volume were used in the mix designs. The results showed the maximum compressive strength value was measured at EVA 5.0 % and PP fiber 0.1 %, the minimum water absorption ratio was at EVA 10 % and PP fiber 0 %, the durability factor for freezing and thawing resistance was at EVA 5.0 % and PP fiber 0.3 % and the minimum weight reduction ratio of resistance to sulfuric acid attack was at EVA 10 % and PP fiber 0.5 % after curing age 42days. Meanwhile, From these results, PP fiber reinforced EVA concrete would be very benefit, if each optimal mix types were used in hydraulic structures, underground utilities and agricultural structures.