• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.653-659
• /
• 2018

In the industrial wastewater that occupies a large proportion of river pollution, the wastewater generated in textile, leather, and plating industries is hardly decomposable. Though dyeing wastewater has generally been treated using chemical and biological methods, its characteristics cause treatment efficiencies such as chemical oxygen demand (COD) and suspended solids (SS) to be reduced only in the activated sludge method. Currently, advanced oxidation technology for the treatment of dyeing wastewater is being developed worldwide. Electro-coagulation is highly adapted to industrial wastewater treatment because it has a high removal efficiency and a short processing time regardless of the biodegradable nature of the contaminant. In this study, the effects of the current density and the electrolyte condition on the COD removal efficiency in dyeing wastewater treatment by using electro-coagulation were tested with an aluminum anode and a stainless steel cathode. The results are as follows: (1) When the current density was adjusted to $20A/m^2$, $40A/m^2$, and $60A/m^2$ under the condition without electrolyte, the COD removal efficiency at 60 min was 62.3%, 72.3%, and 81.0%, respectively. (2) The removal efficiency with NaCl addition was 7.9% higher on average than that with non-addition at all current densities. (3) The removal efficiency with $Na_2SO_4$ addition was 4.7% higher on average than that with non-addition at all current densities.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.3
• /
• pp.409-422
• /
• 2021

A doctor's coat worn by Seo Jae-pil (1864-1951)-National Registered Cultural Heritage No. 607-was conserved with wet cleaning to remove thick wrinkles and brown stains that had been present for a long time. This paper also applied microscopic observation and infrared spectrophotometric analysis to obtain scientific investigation data on the cotton fabric of this doctor's coat. Information about Seo Jae-pil's time as a doctor, the process of changing his English name, and C.D.Williams & Co., which produced the medical coat, revealed that this doctor's coat was worn by Seo Jae-pil between 1892 and 1898 or 1926 and 1939. Additionally, this paper proposes a pad for filling relics that can protect the shape of modern and contemporary clothing, such as Seo Jae-pil's doctor's coat, for display at a museum site. Specifically, this research provides detailed information on the manufacturing of filling pads that can prevent damage to modern and contemporary jackets and coats so that they can be used in the cultural heritage field by developing filling materials for three-dimensional costume artifacts.

• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.117-126
• /
• 2022

In this study, thermoplastic composites were manufactured using ABS(acrylonitrile butadiene styrene), PC(polycarbonate), and POE(polyolefin elastomer), which are thermoplastic plastics. Twin screw extruder and injection molding were used to manufacture thermoplastic composites. When the ABS/PC/POE thermoplastic composite material was manufactured, the POE mass fraction was set to 1 to 5 wt.%, and the thermal and mechanical properties according to the POE mass fraction were analyzed. Based on the physical properties of ABS/PC/POE, a 3D model in the form of an e-bike frame was created. After setting the boundary conditions, when an external load is applied, geometry simulation was performed to predict product performance. The ABS/PC/POE thermoplastic composite material exhibited the best physical properties when the mass fraction of POE was 3 wt.%. In the simulation results for the physical properties of the 3D model in the form of an e-bike frame, the best physical properties were shown when the mass fraction of POE was 2 ~ 3 wt.%. As a result, the manufacturing conditions for ABS/PC/POE thermoplastic composite materials were set, and research was conducted to reduce product development costs and development time.

• Safety and Health at Work
• /
• v.13 no.3
• /
• pp.364-371
• /
• 2022

Background: Respiratory masks can provide healthcare workers with protection from biological hazards when they have good performance. There is a direct relationship between the visual specifications of a mask and its efficacy; thus, the aim of this study was to develop tools for qualitative assessment of the performance of masks used by healthcare workers. Methods: A mixed-methods design was used to develop a qualitative assessment tool for medical face masks (MFM) and particle filtering half masks (PFHM). The development of domains and items was undertaken using observation and interviews, the opinions of an expert panel, and a review of texts and international standards. The second phase evaluated the psychometric properties of tools. Finally, the validated Mask Qualitative Assessment Tools (MQAT) were used to assess six samples from 10 brands of the two types of masks. Results: MQAT-MFM and MQAT-PHFM shared 42 items across seven domains: "cleanliness," "design," "marking, labeling and packaging," "mask layers," "mask strap," "materials and construction," and "nose clip." MQAT-MFM included one additional item. MQAT-PHFM included another nine items associated with an eighth "Practical Performance" domain, and the valve version had another additional "Exhalation Valve" domain and six items. The evaluation indicated 80% compliance for MFM and 71% compliance for PFHM. "Marking, labeling and packaging" and "Layers" were associated with the least compliance in both types of masks and should be checked carefully for defining mask quality. Conclusion: MQAT can be used for immediate screening and initial assessment of MFM and PHFM through appearance, simple tools, and visual inspection.

• Textile Coloration and Finishing
• /
• v.34 no.3
• /
• pp.157-164
• /
• 2022

This study tried to analyze the heat resistance properties by blending epoxy and phenolic resin in a certain ratio, and to analyze the adhesive properties at the time of metal-polymer hetero-adhesion by applying Epoxy-phenolic resin between a silicon steel sheet and m-aramid sheet, the viscosity, adhesive peel strength, and adhesive cross section were measured using a rotational rheometer, a tensile tester(UTM), and a field emission scanning electron microscopy(FE-SEM). The thermal stability and heat resistance were confirmed by measuring the mass loss according to the temperature increase using Thermogravimetric analysis(TGA). After blending with epoxy and Phenolic resin(1:0.25 ratio) curing at 110℃ for 10 min, high adhesive strength was improved more than 40% compared to the adhesive strength using epoxy alone. When the space between the silicon steel sheet and m-aramid sheet, which is created during curing of the E-P blend, is cured with a slight weight, it is possible to control the empty space and improve adhesion.

• Textile Coloration and Finishing
• /
• v.35 no.1
• /
• pp.20-28
• /
• 2023

In this study, TPU resin for coating was prepared by varying the mixing ratio of antistatic TPU and recycled TPU to manufacture permanent antistatic materials. The coated yarn was prepared by coating on the nylon yarn, and then the thermal, rheological, mechanical properties and antistatic properties were analyzed. In addition, antistatic properties and durability were confirmed after manufacturing UD fabrics using coated yarns. The mixing ratio of antistatic TPU and recycled TPU was most appropriate at 4:6, and the antistatic property had a surface resistance of 2.20 × 10⁹ Ω and a static charge of 398 V. In the coating process, the coating speed was most appropriate at 0.21 m/s, and the surface resistance of the UD fabric manufactured with the coated yarn manufactured under this condition was 6.80 × 10⁹ Ω and the static charge was 484 V. The UD fabric had a surface resistance of 7.21 × 10⁹ Ω and a static charge of 517 V after washing 10 times, and it was confirmed that the permanent antistatic property was excellent.

• The Research Journal of the Costume Culture
• /
• v.30 no.6
• /
• pp.799-813
• /
• 2022

The environment has increasingly attracted attention and fashion brands need to use new growth models by developing eco-friendly products, along with the drastic climate change. This study drew design guidelines from the factors of clothing disposal and reuse to propose ways to extend the longevity of clothing. It sets the design goals for the longevity extension of clothing as flexibility, originality, durability, and adjustability and drew a specific design guideline. The design methods used to achieve such goals are as follows. First, the design that is flexible in terms of physical changes needs to increase its activity and to be changeable, by applying pleats, rubber bands and elastic materials to the parts with many physical changes and movements. Second, it is necessary to reinforce the brand identity, create design that is flexible in terms of fashion and design very rare and attractive products, for the goal of original design beyond fashion. Third, it is necessary to increase the quality of clothing and improve the durability which can be decreased by washing and wearing. Fourth, it is necessary to create the design that can produce various styles, preserve the state of clothing and maintain its hygienic conditions by using removable detailed designs, shape-transformation designs and the designs which can be adjusted to climate changes and states, for the goal of adjustable design with better functionality. The findings provide ideas for fashion experts to pay more attention to the extending the longevity of clothing products and to develop eco-friendly designs and strategies.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.3
• /
• pp.113-125
• /
• 2023

The COVID-19 pandemic has led to the normalization of mask-wearing worldwide, and young children are particularly vulnerable to respiratory diseases. Children's masks come in various sizes and shapes, causing confusion among consumers who struggle to find products that can accommodate their child's unique physical conditions. This research aims to analyze the shape and dimensions of health masks designed for young children. A total of 67 mask varieties were collected, and 58 were subjected to analysis. The masks were found to have two primary shapes: foldable and beak-like, with sizes categorized as small and extra-small. The majority of masks were manufactured in Korea, and the size labeling systems varied among manufacturers. The mask materials were non-woven fabric or polypropylene, and there was diversity in terms of the adjustable earbands and the use of additional accessories. The dimensions of the masks varied depending on their shape, with significant differences in the weight and the length of the wire holes. Subsequent research should focus on conducting wearability evaluations to verify the dimensional suitability of commercially available children's health masks based on shape and size. Additionally, this study aims to provide foundational data that can assist in the development of children's masks with size ranges that differentiate them from adult masks and cater to specific age groups.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.spc
• /
• pp.19-30
• /
• 2023

Recently, the government has provided support such as entering new markets, expanding sales channels, and supporting manpower, not just in the form of funding, to efficiently and effectively support limited national resources to improve corporate performance. In this study, we tried to find out the effect of government support for companies that have benefited from the Excellent Technology Research Center Project (ATC Project) and the World Class 300 project using propensity score matching. As a result of the analysis, the effect of government support for the ATC project became visible after the appointment period, while the effect of the World Class 300 project was insignificant. This means that when the size of the company is small, the effect of government support is more pronounced. This suggests that in order to maximize the effectiveness of government support, appropriate national policy interventions such as government innovation funding are needed when the size of the company is small. In this study, differences in the timing, performance indicators, and company size of policy support effects were found in the growth stage of a company from a mid- to long-term time series perspective, suggesting that support policies based on this need to be adjusted and redesigned.

• Textile Coloration and Finishing
• /
• v.35 no.3
• /
• pp.169-178
• /
• 2023

The extended use of polyester nowadays has increased the amount of waste polyester (PET) released into the environment. Although these materials don't directly harm living things or the ecosystem, their inability to biodegrade remains one of the major global threats, driving up the amount of solid waste made up of PET. Environmental concerns have approved an increasing interest in recycled PET however the production of recycled PET with sufficient mechanical properties is still a challenge. Recycled Polyester (rPET) yarns are inexpensive and have the potential to acquire better mechanical characteristics through physical treatments, particularly by using technically simple method like uniaxial drawing. This study inspected the drawn behavior of virgin PET yarns and rPET yarns under various drawing parameters by first analyzing the initial material characteristics of both yarn. The impact of stretching on mechanical and morphological properties was also investigated. The results showed that virgin PET has better properties than rPET yarn; however, mechanical properties resembling virgin PET are achieved after optimizing the draw ratio.