• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.4
• /
• pp.97-105
• /
• 2001

Rubber bearings may exhibit a significant cold temperature effect and some velocity dependency(strain rate effect). Both of these attributes which affect non-linear behavior must be accounted for when accurately modeling the bearings behavior, therefore, an analytical models is proposed to consider the effects of the cold temperature and strain rate on both rubber and lead. From the results of an experimental investigation where the frozen bearings were tested under lateral cyclic loading with constant axial load, a non-linear system identification with least squares procedure was applied to determine the material properties of rubber and lead. It is demonstrated that the proposed analytical model is able to simulate the reversed cyclic loading behavior of elastometric and lead-rubber bearings.

• Structural Monitoring and Maintenance
• /
• v.7 no.2
• /
• pp.125-147
• /
• 2020

Damage detection of structures is one of the most important topics in structural health monitoring. In practice, the response is not available at all structural degrees of freedom, and due to the installation of sensors at some degrees of freedom, responses exist only in limited number of degrees of freedom. This paper is investigated the damage detection of structures by applying two approaches, AllDOF and Dynamic Condensation Method (DCM), based on the Modified Modal Strain Energy Method (MMSEBI). In the AllDOF method, mode shapes in all degrees of freedom is available, but in the DCM the mode shapes only in some degrees of freedom are available. Therefore by methods like the DCM, mode shapes are obtained in slave degrees of freedom. So, in the first step, the responses at slave degrees of freedom extracted using the responses at master degrees of freedom. Then, using the reconstructed mode shape and obtaining the modified modal strain energy, the damages are detected. Two standard examples are used in different damage cases to evaluate the accuracy of the mentioned method. The results showed the capability of the DCM is acceptable for low mode shapes to detect the damage in structures. By increasing the number of modes, the AllDOF method identifies the locations of the damage more accurately.

• Microbiology and Biotechnology Letters
• /
• v.28 no.3
• /
• pp.161-166
• /
• 2000

Antifungal Activity and Identification of an Actinomycetes Strain Isolated from Mummified Peaches. Lirn, Tae Heon*, Jung Mok Lee, Tae Hyun Chang, and Byeongjin Chal. *Research Institute of Plant Nutrient, Oaeyu Co, Inc. Kyongsan 712-820, Korea, 1 Department of Agricultural Bi%g'f Chungbul< NatJ"onal Univershy, Cheongju 367-763, Korea - An actinomycetes strain which produced chitinase, urease, and antifungal substances to MoniliniaJhtcticola was isolated from peaches mununified by Moniliniafructicola. The strain TH-04 was identified as Streptomyces sp. based on cultural and lTIOIphological characteristics, cell wall diaminopimelic acid, and sugar patterns ofwhole~cell extracts. Streptomyces sp. TH~04 showed antifungal activity to several fungi including Moniliniafructicola, Colletotrichum gloeosporioides, Magnaponhe grisea, Rhizoctonia solani, Phytophthora capsici, Altemaria kikuchiana, Fusarium solani, and Fusarium O),ysporum. The optimum cultural conditions for the production of antifungal substances were $20^{\circ}C$pH 7, and 7 days.

• Nuclear Engineering and Technology
• /
• v.44 no.8
• /
• pp.953-960
• /
• 2012

This paper reports the irradiation effect on the deformation behavior and tensile fracture properties of A533B RPV steel. An inverse identification technique using iterative finite element (FE) simulation was used to determine those properties from tensile data for the A533B RPV steel irradiated at 65 to $100^{\circ}C$ and deformed at room temperature. FE simulation revealed that the plastic instability at yield followed by softening for higher doses was related to the occurrence of localized necking immediately after yielding. The strain-hardening rate in the equivalent true stress-true strain relationship was still positive during the necking deformation. The tensile fracture stress was less dependent on the irradiation dose, whereas the tensile fracture strain and fracture energy decreased with increasing dose level up to 0.1 dpa and then became saturated. However, the tensile fracture strain and fracture energy still remained high after high-dose irradiation, which is associated with a large amount of ductility during the necking deformation for irradiated A533B RPV steel.

• Microbiology and Biotechnology Letters
• /
• v.24 no.3
• /
• pp.299-303
• /
• 1996

Isolation, identification, and culture conditions of a lytic enzyme producing microorganism against Lacto- bacillus plantarum were investigated. The selected strain was gram-positive, rod (0.7 $\times$ 2.7 $\mu$m in size), and non-motile. The strain did not have any flagella and spores. According to its cultural and physiological characteristics, the strain was identified as Bacillus sp. The optimal pH and temperature for the production of lytic enzyme were 8.0 and 30$\circ$C, respectively. The maximum enzyme activity showed 1.5 units/ml in the medium composed of 1% peptone and 0.1% NaCl.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.2
• /
• pp.32-39
• /
• 1999

The following is experimental result of selecting soil bacteria showing toxicity against Root-knot nematode (Meloidogyne hapla). Out of 286 strains isolated from soil, one(NC67) showing toxicity against M.hapla is selected The selected strain(NC67) is identified of B. thuringiensis subsp. indiana. It proved out that the toxic maerial against M. hapla produce by NC67 strain is an exotoxin. The result of examining the existence of the extercellular toxicity product by the toxic strain(NC67) by usign activated carbon column chromatography, Dowex 50W column chromatography and TLC of silical gel etc. proved out that it is a single material.

• Journal of Life Science
• /
• v.9 no.2
• /
• pp.1-4
• /
• 1999

Nonactin, as a radical-producing antibiotic, was isolated from the cultural broth of the strain JM-4151. This strain was identified as Streptomyces viridochromogenes and designated S. viridochromogenes JM-4151. The antibacterial activity of nonactin against Bacillus subtilis was antagonized by the activity opf quercetin, an oxygen radical scavenger. This result suggests that oxygen radical formation might be the cause for the antibacterial activity of nonactin.

• Plant Disease and Agriculture
• /
• v.1 no.2
• /
• pp.22-25
• /
• 1995

The soybean necrotic disease has been shown to be caused by a virulent strain or strains of soybean mosaic virus (SMV) in soybean cultivar Kwnaggyo. However, the disease was found in soybean cultivar Hwanggeum which was released as a leading and mosaic resistant soybean cultivar in Korea. The strain SMV-G5H appeared to an isolate showing similar characteristics with the strain SMV-G7, although there were some variations in reactions of soybean differentials used.

• Structural Engineering and Mechanics
• /
• v.67 no.4
• /
• pp.327-336
• /
• 2018

In this study, an efficient damage index is proposed to identify multiple damage cases in structural systems using the concepts of frequency response function (FRF) matrix and strain energy of a structure. The index is defined based on the change of strain energy of an element due to damage. For obtaining the strain energy stored in elements, the columnar coefficients of the FRF matrix is used. The new indicator is named here as frequency response function strain energy based index (FRFSEBI). In order to assess the performance of the proposed index for structural damage detection, some benchmark structures having a number of damage scenarios are considered. Numerical results demonstrate that the proposed index even with considering noise can accurately identify the actual location and approximate severity of the damage. In order to demonstrate the high efficiency of the proposed damage index, its performance is also compared with that of the flexibility strain energy based index (FSEBI) provided in the literature.

• Microbiology and Biotechnology Letters
• /
• v.23 no.5
• /
• pp.580-587
• /
• 1995

In order to produce the bacteriolytic enzyme, bacterial strains capable of excreting a large amount of the enzyme were screened from the coastal sea water samples in Pusan. The bacterial strain SH-1, which showed the highest activity among 43 bacteriolytic enzyme producing bacteria, was finally selected for further studies. The strain SH-1 was an endospore-forming grampositive rod, and the position of spore was paracentral. These morphological characteristics assigned the isolated strain to the morphological group I classified by Gordon. The fatty acid composition of the bacterial stain was analyzed to be consisted of branched chains of iso-Cn and anteiso-Cn. Based on the percent content of the branched chain (93.85%), the isolates could be identified as a species of Bacillus. According to the experimental results of the API system (API 50CHB & API 20E) the strain was identified as Bacillus subtilis. Numerical texonomy, in which 82 major characters were examined using several species of Bacillus as the standard bacteria, indicated that the strain SH-1 showed 90% similarity to Bacillus subtilis. Thus, the isolated strain SH-1 could be identified as Bacillus subtilis.