References
- Y. Dai, G. W. Egeland, and B. Long, "Tensile Properties of Ferritic/Martensitic Steels Irradiated in STIP-I," J. Nucl. Mater., Vol. 377, pp. 115-121 (2008). https://doi.org/10.1016/j.jnucmat.2008.02.036
- J. E. Pawel, A. F. Rowcliffe, G. E. Lucas, and S. J. Zinkle, "Irradiation Performance of Stainless Steels for ITER Application," J. Nucl. Mater., Vol.239, pp.126-131 (1996). https://doi.org/10.1016/S0022-3115(96)00484-9
- K. Farrell and T. S. Byun, "Tensile Properties of Candidate SNS Target Container Materials after Proton and Neutron Irradiation in the LANCE Accelerator," J. Nucl. Mater., Vol. 296, pp. 129-138 (2001). https://doi.org/10.1016/S0022-3115(01)00515-3
- K. Farrell, T. S. Byun, and N. Hashimoto, "Deformation Mode Maps for Tensile Deformation of Neutron-Irradiated Structural Alloys," J. Nucl. Mater., Vol. 335, pp. 471-486 (2004). https://doi.org/10.1016/j.jnucmat.2004.08.006
- K. Farrell and T.S. Byun, "Tensile Properties of Ferritic/ Martensitic Steels Irradiated in HFIR, and Comparison with Spallation Irradiation Data," J. Nucl. Mater., Vol. 318, pp. 274-282 (2003). https://doi.org/10.1016/S0022-3115(03)00102-8
-
M. Matijasevic, E. Lucon, and A. Almazouzi, "Behavior of Ferritic/Martensitic Steels after n-irradiation at 200 and 300
${^{\circ}C}$ ," J. Nucl. Mater., Vol. 377, pp. 101-108 (2008). https://doi.org/10.1016/j.jnucmat.2008.02.063 - T. S. Byun, K. Farrell, E. H. Lee, J. D. Hunn, and L. K. Mansur, "Strain Hardening and Plastic Instability Properties of Austenitic Stainless Steels after Proton and Neutron Irradiation," J. Nucl. Mater., Vol. 298, pp. 269-279 (2001). https://doi.org/10.1016/S0022-3115(01)00651-1
- Y. Dai, G. W. Egeland, and B. Long, "Tensile Properties of EC316LN Irradiated in SINQ to 20 dpa," J. Nucl. Mater., Vol. 377, pp. 109-114 (2008). https://doi.org/10.1016/j.jnucmat.2008.02.035
- B. V. Cockeram, R. W. Smith, and L. L. Snead, "The Influence of Fast Neutron Irradiation and Irradiation Temperature on the Tensile Properties of Wrought LCAC and TZM Molybdenum," J. Nucl. Mater., Vol. 346, pp. 145-164 (2005). https://doi.org/10.1016/j.jnucmat.2005.06.016
- T. S. Byun and K. Farrell, "Irradiation Hardening Behavior of Polycrystalline Metals after Low Temperature Irradiation," J. Nucl. Mater., Vol. 326, pp. 86-96 (2004). https://doi.org/10.1016/j.jnucmat.2003.12.012
- T. S. Byun, "Dose Dependence of True Stress Parameters in Irradiated BCC, FCC, and HCP Metals," J. Nucl. Mater., Vol. 361, pp. 239-247(2007). https://doi.org/10.1016/j.jnucmat.2006.12.014
- T. S. Byun and K. Farrell, "Plastic Instability in Polycrystalline Metals after Low Temperature Irradiation," Acta Mater., Vol. 52, pp. 1597-1608 (2004). https://doi.org/10.1016/j.actamat.2003.12.023
- T. S. Byun, K. Farrell, and M. Li, "Deformation in Metals after Low-temperature Irradiation: Part I - Mapping Macroscopic Deformation Modes on True Stress-Dose Plane," Acta Mater., Vol. 56, pp. 1044-1055 (2008). https://doi.org/10.1016/j.actamat.2007.10.061
- T. S. Byun, K. Farrell, and M. Li, "Deformation in Metals after Low-temperature Irradiation: Part II - Irradiation Hardening, Strain Hardening, and Stress Ratios," Acta Mater., Vol. 56, pp. 1056-1064 (2008). https://doi.org/10.1016/j.actamat.2007.10.056
- I. V. van Osch and M. I. de Vries, "Irradiation Hardening of V-4Cr-4Ti," J. Nucl. Mater., Vol. 271 & 272, pp. 162-166 (1999). https://doi.org/10.1016/S0022-3115(98)00704-1
- J. W. Kim and T. S. Byun, "Analysis of Tensile Deformation and Failure in Austenitic Stainless Steels: Part I - Temperature Dependence," J. Nucl. Mater., Vol. 396, pp. 1-9 (2010). https://doi.org/10.1016/j.jnucmat.2009.08.010
- J. W. Kim and T. S. Byun, "Analysis of Tensile Deformation and Failure in Austenitic Stainless Steels: Part II - Irradiation Dose Dependence," J. Nucl. Mater., Vol. 396, pp. 10-19 (2010). https://doi.org/10.1016/j.jnucmat.2009.08.009
- Y. Bao, "Dependence of Ductile Crack Formation in Tensile Tests on Stress Triaxiality, Stress and Strain Ratios," Eng. Fract. Mech., Vol. 72, Vol. 502-522 (2005).
- Y. Ling, "Uniaxial True Stress-Strain after Necking," AMP J. Tech., Vol. 51, pp. 37-48 (1996).
- C. K. Oh, Y. J. Kim, J.H. Baek, and W. S. Kim, "Development of Stress-modified Fracture Strain for Ductile Failure of API X65 Steel," Int. J. Fract., Vol. 143, pp. 119-133 (2007). https://doi.org/10.1007/s10704-006-9036-3
- M. Joun, J. G. Eom, and M. C. Lee, "A New Method for Acquiring True Stress - Strain Curves over a Large Range of Strains using a Tensile Test and Finite Element Method," Mech. Mater., Vol. 40, pp. 586-593 (2008). https://doi.org/10.1016/j.mechmat.2007.11.006
- Hibbitt, Karlson, and Sorensen Inc., 2010, ABAQUS Ver. 6.9 User's Manual.
- P. Koc and B. Stok, "Computer-aided Identification of the Yield Curve of a Sheet Metal after Onset of Necking," Comp. Mater. Sci., Vol. 31, pp. 155-168 (2004). https://doi.org/10.1016/j.commatsci.2004.02.004
- Dieter, G.E., Mechanical Metallurgy, SI Metric Ed., McGraw-Hill, Inc.(1988)
- G. R. Odette, M. Y. He, E. G. Donahue, and G. E. Lucas, "On the Relation between Engineering Load-displacement Curves and True Stress Strain Behavior in Tests on Flat Tensile Specimens," Small Specimen Test technique: Fourth Volume, ASTM STP 1418, Sokolov M, Landes J, Lucas G, ASTM International, West Conshohocken, PA, pp. 221-231 (2002).
- K. Shiba and T. Hirose, "Deformation Behavior of Reduced Activation Ferritic Steel during Tensile Test," Fus. Eng. Des., Vol. 81, pp. 1051-1055 (2006). https://doi.org/10.1016/j.fusengdes.2005.07.030