• 한국경영과학회지
• /
• 제36권1호
• /
• pp.39-55
• /
• 2011

Process monitoring has been emphasized for the monitoring of complex system such as chemical processing industries to achieve the efficiency enhancement, quality management, safety improvement. Recently, ICA (Independent Component Analysis) based MSPC (Multivariate Statistical Process Control) was widely used in process monitoring approaches. Moreover, DICA (Dynamic ICA) has been introduced to consider the system dynamics. However, the existing approaches show the limitation that their performances are strongly dependent on the statistical distributions of control variables. To improve the limitation, we propose a novel approach for process monitoring by integrating DICA and LOF (Local Outlier Factor). In this paper, we aim to improve the fault detection rate with the proposed method. LOF detects local outliers by using density of surrounding space so that its performance is regardless of data distribution. Therefore, the proposed method not only can consider the system dynamics but can also assure robust performance regardless of the statistical distributions of control variables. Comparison experiments were conducted on the widely used benchmark dataset, Tennessee Eastman process (TE process), and showed the improved performance than existing approaches.

• Communications for Statistical Applications and Methods
• /
• 제7권3호
• /
• pp.773-788
• /
• 2000

Statistical process control (SPC) and engineering process control (EPC) are based on different strategies for processes quality improvement. SPC reduces process variability by detecting and eliminating special causes of process variation. while EPC reduces process variability by adjusting compensatory variables to keep the quality variable close to target. Recently there has been needs for a process control proceduce which combines the tow strategies. This paper considers a combined scheme which simultaneously applies SPC and EPC techniques to reduce the variation of a process. The process model under consideration is an integrated moving average(IMA) process with a step shift. The EPC part of the scheme adjusts the process back to target at every fixed monitoring intervals, which is referred to a repeated adjustment scheme. The SPC part of the scheme uses an exponentially weighted moving average(EWMA) of observed deviation from target to detect special causes. A Markov chain model is developed to relate the scheme's expected cost per unit time to the design parameters of he combined control scheme. The expected cost per unit time is composed of off-target cost, adjustment cost, monitoring cost, and false alarm cost.

• International Journal of Quality Innovation
• /
• 제1권1호
• /
• pp.97-105
• /
• 2000

In this paper, a two-section method for measuring is introduced and the variation sources of measurement process are analysed. Measuring is a special process in general process. Various variation source must be firstly decomposed so that the statistical distribution law of measuring process can be established, and then implement monitoring control of the measuring process. A special method to obtain the measuring variation is discussed, and a monitoring control technique for measuring process is studied based statistical distribution. Towards the end, we briefly introduce software design for the analysis and control of a measurement process.

• Communications for Statistical Applications and Methods
• /
• 제7권2호
• /
• pp.435-446
• /
• 2000

Statistical process control(SPC) and engineering process control(EPC) are two strategies for quality improvement that have been developed independently. EPC seeks to minimize variability by adjusting compensatory variables in order to make the process level close to the target, while SPC seeks to reduce variability by monitoring and eliminating causes of variation. One purpose of this paper is to propose the IMA(0,1,1) model as the in-control process model. For the out-of-control process model we consider two cases; one is the case with a step shift in the level, and the other is the case with a change in the nonstationarity. Another purpose is to suggest the use of an integrated process control procedure with adjustment and monitoring, which can consider the proposed process model effectively. An integrated control procedure will improve the process control activity significantly for cases of the proposed model, when compared to the procedure of using either EPC or SPC, since EPC will keep the process close to the target and SPC will eliminate special causes.

• Communications for Statistical Applications and Methods
• /
• 제21권1호
• /
• pp.69-80
• /
• 2014

This paper considers the problem of monitoring the mean of a normally distributed process variable when the objective is to effectively detect both a sustained shift and a linear drift. The design and application of a generalized likelihood ratio (GLR) chart for simultaneously monitoring a sustained shift and a linear drift are evaluated. The GLR chart has the advantage that when we design this chart, we do not need to specify the size of the parameter change. The performance of the GLR chart is compared with that of other control charts, such as the standard cumulative sum (CUSUM) charts and the cumulative score (CUSCORE) charts. And we compare the proposed GLR chart with the GLR charts designed for monitoring only a sustained shift and for monitoring only a linear drift. Finally, we also compare the proposed GLR chart with the chart combinations. We show that the proposed GLR chart has better overall performance for a wide range of shift sizes and drift rates relative to other control charts, when a special cause produces a sustained shift and/or a linear drift in the process mean.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 추계 학술대회
• /
• pp.211-216
• /
• 2006

Monitoring variability is a vital part of modem statistical process control. The conventional Shewhart Rand S charts address the setting where the in-control process readings have a constant variance. In some settings, however, it is the coefficient of variation, rather than the variance, that should be constant. This paper develops a chart, equivalent to the S chart, for monitoring the coefficient of variation using rational groups of observations.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 1999년도 추계학술대회
• /
• pp.217-236
• /
• 1999

Engineering process control (EPC) is one of the techniques very widely used in process. EPC is based on control theory which aims at keeping the process on target. Statistical process control (SPC), also known as statistical process monitoring. The main purpose of SPC is to look for assignable causes (variability) in the process data. The combined SPC/EPC scheme is gaining recognition in the process industries where the process frequently experiences a drifting mean. This paper aims to study the difference between SPC and EPC in simple terms and presents a case study that demonstrates successful integration of SPC and EPC for a product in drifting industry. Statistical process control (SPC) monitoring of the special causes of a process, along with engineering feedback control such as proportional-integral-derivative (PID) control, is a major tool for on-line quality improvement.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1386-1390
• /
• 2007

This paper presents the equipment condition monitoring technology for the process or the equipment using statistical techniques. The equipment condition monitoring system consists of an empirical model to estimate the expected sensor values of process variables and a diagnose model to detect the abnormal condition and to identify the root source of the problem. The empirical model is constructed by the analysis of historic data. The diagnose model uses the sequential probability ratio test (SPRT) technique. The monitoring system was tested with real operating data acquired from the Reactor Coolant Pump Seal in the Nuclear Power Plant. It can detect the system degradation or failure at the early stage since it is able to catch the subtle deviation of process variables from normal condition.

• Korean Chemical Engineering Research
• /
• 제46권2호
• /
• pp.233-247
• /
• 2008

공정 모니터링 기술은 공정 내에서 일어나는 예상치 못한 조업변화 및 이상을 조기에 감지하고 조업 이상에 영향을 끼친 근본 원인을 밝혀내어 제거해 줌으로써 공정의 안정적인 조업과 양질의 제품생산의 기반을 제공하여 준다. 데이터에 기반한 통계적 공정 모니터링 방법은 양질의 공정 데이터만 주어진다면 통계적 처리를 접목하여 비교적 쉽게 모니터링을 할 수 있고 공정의 데이터 분석에 이용할 수 있는 도구를 얻을 수 있다는 장점이 있다. 그러나 실제 공정에서는 비선형성, non-Gaussianity, 다중 운전모드, 공정상태변화로 인해 기존의 다변량 통계적 방법을 이용한 공정 모니터링 기법은 비효율적이거나, 공정 감시 성능의 저하, 종종 신뢰할 수 없는 결과를 야기한다. 이러한 경우 기존의 방법으로는 더이상 공정을 정확히 감시할 수 없기 때문에 최근에 많은 새로운 방법들이 개발 되었다. 본 총설에서는 이러한 단점을 보안하기 위해 최근 주목할 만한 연구결과인 공정 비선형성을 고려한 커널주성분분석(kernel principle component analysis) 모니터링 기법, 주성분분석 모델 조합을 이용한 다중모델(mixture model) 모니터링 기법, 공정 변화를 고려한 적응모델(adaptive model) 모니터링 기법, 그리고 센서 이상진단과 보정의 이론과 응용결과에 대하여 소개한다.

• Journal of the Korean Data and Information Science Society
• /
• 제19권4호
• /
• pp.1191-1200
• /
• 2008

Recently classroom monitoring is becoming important since the lecture is being held in the classroom and academic institutions are interested in the quality assurance. Some institutions have adopted ISO 9000 systems and constructed monitoring system through measurement, analysis and improvement. In this study quality assurance problems in academic institutions and the requirements of ISO 9001:2000 will be briefly discussed. Next we will investigate how to monitor the lecture in the classroom(in-class) using statistical process control techniques such as control charts. Then case study will be given to illustrate the technique to use appropriate statistics. Finally how to monitor the learning process during in-class and after-class will be proposed.