• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.507-512
• /
• 2000

The ob.jective of this study is to determine fracture behaviors(penetrati0n modes) and resistance to penetration duringballistic impact of Al 5052-H34 alloy laminates and anodized Al 5052-H34 alloy laminates. Resistance to penetration is determined by $V_{50}$ ballistic limit, a statical velocity with 50% probability for complete penetration, test method. Fracture behaviors and ballistic tolerance, described by penetration modes, are respectfully observed that result from V50 test and Projectile Through Plates (PTP) test at velocities greater than $V_{50}$. PTP tests were conducted with 0" obliquity at room temperature using 5.56mm ball projectile. $V_{50}$ tests with 0" obliquity at room temperature were conducted with projectiles that were able to achieve near or complete penetration during PTP tests. Surface Hardness, resistance to penetration, and penetration modes of A1 5052-H34 alloy laminates compared to those of anodized Al 5052-H34 alloy laminates.y laminates.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.527-532
• /
• 2000

The armor composite material targets such as aramid FRMLs with different type and ply number of face material and different type of back-up material, were studied to determine ballistic impact resistance and dynamic failure behavior during ballistic impact. Ballistic impact resistance is determined by $\textrm{V}_{50}$ ballistic limit, a statical velocity with 50% probability for complete penetration, test method. Also dynamic failure behaviors are respectfully observed that result from $\textrm{V}_{50}$ tests. $\textrm{V}_{50}$ tests with $0^{\circ}$ obliquity at room temperature were conducted with projectiles that were able to achieve near or complete penetration during high velocity impact tests. As a result, ballistic impact resistance of anodized Al 5052-H34 alloy(2 ply) is better than that of anodized Al 5052-H34 alloy(1 ply), but Titanium alloy showed the similar ballistic impact resistance. In the face material, ballistic impact resistance of titanium alloy is better than that of anodized Al 5052-H34 alloy. In the back-up material, ballistic impact resistance of T750 type aramid fiber is better than that of CT709 type aramid fiber.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.74-79
• /
• 2008

In this study, impact transient responses of (Graphite/Epoxy) laminated composite subjected to low-velocity impact are investigated using a finite element method. Dynamic von-Karman plate equations considering large deflection of plate are modified to include the effect of transverse shear deformations as in Mindlin plate theory and also the rotary inertia effect is considered. The convergence of transient responses is used contact law established through the statical indentation test. We investigate displacements, contact forces and strains by thickness variation of various laminated composite. We compare and analyze each results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.133-142
• /
• 1993

This paper prrsents shape matching of two-dimensional object. This shape matching is applied to two-dimensional simple c10sedcurves represented by polygons. A large number of shape matching procedures have proposed baseed on teh view that shape can be represented by a vector of numerical features, and that this representation can be matched using techniques from statical pattern recognition. The varieties of features that have been extracted from shapes and used to represent them are numerous. But all of these feature-based approches suffer from the shortcoming that the descriptor of a segment of a shape do not ordinarily bear any simple relations hip to the description for the entire shape. We solve the segment matching problem of shape matching, defined as the recognition of a piece of a shape as approximate match to a part of large shape, by using relaxation labeling technique.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.371-377
• /
• 2003

In this paper, comparison of feature parameters for emotion recognition using speech signal is studied. For this purpose, a corpus of emotional speech data recorded and classified according to the emotion using the subjective evaluation were used to make statical feature vectors such as average, standard deviation and maximum value of pitch and energy and phonetic feature such as MFCC parameters. In order to evaluate the performance of feature parameters speaker and context independent emotion recognition system was constructed to make experiment. In the experiments, pitch, energy parameters and their derivatives were used as a prosodic information and MFCC parameters and its derivative were used as phonetic information. Experimental results using vector quantization based emotion recognition system showed that recognition system using MFCC parameter and its derivative showed better performance than that using the pitch and energy parameters.

• The Korean Journal of Applied Statistics
• /
• v.29 no.6
• /
• pp.1041-1059
• /
• 2016

The increasing demand from researchers and policy makers for microdata has also increased related privacy and security concerns. During the past two decades, a large volume of literature on statistical disclosure control (SDC) has been published in international journals. This review paper introduces relatively recent SDC approaches to the communities of Korean statisticians and statistical agencies. In addition to the traditional masking techniques (such as microaggregation and noise addition), we introduce an online analytic system, differential privacy, and synthetic data. For each approach, the application example (with pros and cons, as well as methodology) is highlighted, so that the paper can assist statical agencies that seek a practical SDC approach.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.9 s.240
• /
• pp.1161-1168
• /
• 2005

As a result of vehicle maintenance of rocker arm shaft for 4-cylinder SOHC engine, failure analysis of rocker arm shaft is needed. Because more than $30\%$ of vehicles investigated have been fractured. Failure analysis is classified into an naked eyes, microscope and X-ray fractography etc. It can predict applied load as well as load type. These methods are applicable to components with simple boundary condition but aren't applicable to components with complex boundary condition. The existing fractography don't catch hold of failure boundary condition quantitatively. Especially, in case that the components isn't fractured at same position. We must determine the most dangerous failure boundary condition to evaluate their operation mechanism. The effect of various factors on response should be estimated to solve this statical problem. This study presents the most dangerous failure boundary condition of rocker arm shaft using orthogonal array and ANOVA in order to assure its robustness.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.4
• /
• pp.613-620
• /
• 2017

Objectives: The purpose of this study is to investigate the antibacterial effect of Streptococcus mutans of tea tree ingredient. Methods: The experimental groups were each given with different concentrations (30 or 50 vol%) of tea tree prepared in saline solution. The control group applied only saline solution. The tea tree coating of the specimen were examined under a scanning electron microscope. For the antibacterial activity test of the tea tree, the contact angle of the tea tree- coated specimen's surface was analyzed. The antibacterial effect against Streptococcus mutans was determined by counting the colony forming units (CFU). The statical statics were evaluated by using one-way ANOVA and paired t-test. Results: The tea tree treated group of hydrophilic more than non treated group. Antibacterial experiments demonstrated that tee tree solution was effective against Streptococcus mutans. However there was no significant difference in depending solution concentration groups. Conclusions: The antimicrobial activity of the tea tree containing solution showed its potential for use as coating for denture and medical materials.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.126-134
• /
• 2003

In order to investigate the effect of surface treatment in Aluminium alloy and Titanium alloy which are used to armor material during ballistic impact, a ballistic testing was conducted. Anodizing was used to achieve higher surface hardness of Aluminium alloy and Iron plating in PVD(Physical Vapor Deposition) method was used to achieve higher surface hardness of Titanium alloy. Surface hardness test were conducted using a Micro victor's hardness tester. Ballistic resistance of these materials was measured by protection ballistic limit(V-50), a statical velocity with 50% probability penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are respectfully observed from the results of V-50 test and Projectile Through Plates (PTP) test at velocities greater than V-50. PTP tests were conducted with 0$^{\circ}$obliquity at room temperature using 5.56mm ball projectile. V-50 tests were conducted with 0$^{\circ}$obliquity at room temperature with projectiles that were able to achieve near or complete penetration during PTP tests. Surface hardness, resistance to penetration. and penetration modes of surface treated alloy laminates are compared to those of surface non-treated alloy laminates. A high speed photography was used to analyze the dynamic perforation phenomena of the test materials.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1500-1509
• /
• 2007

The purpose of this study was to observe lifestyle of female consumers aged 15-25. Also it was to measure brand awareness, to determine purchase criteria in fashion magazine, and to determine promotion preferences according to lifestyle segmentation variables. We distributed 600 questionnaires and 475 reliable questionnaires were used for a statical analysis. Data analyses were conducted with SPSS program on the frequency mean value, Chi-square test, Cluster analysis, and Factor analysis. We classified four clusters such as individual style seekers, trend seekers, promotion/good appearance seekers, and low fashion interest group, based on lifestyle variables. There was a significant difference in brand awareness in Vogue Girl, Cosmo Girl, Elle, Figaro, Ecole magazine among four clusters. There was a significant difference in such purchase criteria as favorable cover models, good "burok" which is a magazine supplement, brand names, and price among four clusters. In addition, the results of ANOVA represent that there was a significant difference in preferred types of promotion such as discount price, clothing gifts, fashion accessary gifts and hair tool gifts. However, the first ranked preferred one was a cosmetic gift in all the magazines, which favored more by trend seeker group.