References
- Huh Sun Moo, Sim In Ok, Chun Chang Hwan, 'Application present and manufacture technique of Titanium alloy on bulletproof,' Trend in Metals & Materials Engineering, Vol. 13, No. 5, pp. 34-43, 2000
- Roger L. Ellis, F. Lalande, Hongyu, Jia, and Craig A. Rogers, 'Ballistic impact resistance of graphite composites with superelatic SMA and SPECTRA hybrid components,' AIAA, pp. 906-916, 1997
- Sohn S.W., Kim H.J., Park Y.U, Hong S.H, 'A Study on the ballistic performance and fracture mode of Aluminum 5052-H34 alloy laminates,' Proc. KSPE, 2000, pp. 507-512
- Sohn,S.W, Lee. D.S, Kim H.J., Hong. S.H, 'An Experimental Study on the Impact Characteristics of Surface Hardened Al 5052-H34 Alloy,' J. KSPE, Vol. 20, No. 3, 2003
- Sohn, S.W, Hong. S.H, 'Research Trends on the Ballistic Protection Materials and development of bullet-proof helmet,' J. KSPE. Vol. 19, No. 1, pp. 7-19, 2002
- U.S Army Research Laboratory, 'Military Stadard V50 Ballistic Test for Armor. MIL-STD-662E,' Dept. of Navy, Defense Printing Service, Philadelphia, PA, 1984
- Backman. M.E. and W. Goldsmith, 'the Mechanics of Penetration of Projectiles into Targ ets,' International Journal of Engineering Science, Vol. 16, pp. 1-99, 1978 https://doi.org/10.1016/0020-7225(78)90002-2
- Zukas, J.A, T. Nicholas, H.F Swift, L.B. Greszczuk, and DR. Curran, 'Penetration and Perforation of Solid,' Impact Dynamics, Zukas. J.A., et al., Jhon Wiley and Sons, New York, pp. 155-183, 1982
- U.S. Army Test Evaluation Command, 'U.S. Army Test Eval. Comd. Test Operations Procedure 2-2-710 Balllistic Test for Ramor,' A137973. U.S. Army Test Evaluation Command. Aberdeen Proving Ground, MD 21005
- Bong Hee Hahn, Dae Hong Ko, 'Effect of Substrate Temperature and N2 Pressure on the Properties and Structure of Titanium Nitride Deposits by Reactive Ion Plating,' J. of the Korean Institute of Metals, Vol. 24, No. 10, 1986
- Kim, J.K, Yu, T.X, 'Impact Response and Dynamic Failure of Composite and Laminate Materials, Part I : Impact Damage and Ballistic Impact,' Trans Tech Publications, 1998
- Kim. J.K, Yu, T.X, 'Impact Response and Dynamic Failure of Composite and Laminate Materials , Part II : Strain-Rate Effect, Engrgy Absorption and Modeling,' Trans Tech Publications, Switzerland, 1998
- P.D. Smith, J.G. Hetherington, 'Blast and Ballistic Loading of Structures,' Butterworth-Heinemnn Ltd, 1994
- Roy C. Laible, 'Ballistic Materials and Penetration Mechanics,' Elsvier Scientific Publishing Company, 1980
- Sohn, S.W, Lee, D.S, Kim H.J, Hong. S.H, 'The Fracture Behavior of the surface treat ed Al 5083-H131 alloy under hyper velocity impact,' Procceding of International symposium on Experimental Mechanics, 2002, 12. 29, Taipei, Taiwan
- John F. Chinella, Martin G.H. Wells, 'Ballastic Penetration and Fracture Modes of An Austempered Ductile Iron and AISI 4140 Steel,' U.S. Army Research Lab, ASME PVP- Vol.361, pp. 37-53, 1998
- U.S. Army Research Lab v.361 Ballastic Penetration and Fracture Modes of An Austempered Ductile Iron and AISI 4140 Steel John F.Chinella;Martin G.H.Wells