• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.70-71
• /
• 2014

The structural work is the main process of building construction which influence on the time, cost, safety and quality. The form work is one of the main process which has from 20 to 30 percentage of structural work. Especially the form work for beams is complex and need more manpower compared with form work for column or slab. When the existing forms such as plywood form, steel framed wooden form and aluminum form, is used for form work of beam, it would result in the cost overrun caused by needs of lots of manpower and resources. Therefore, the aim of this study is analysis of the requirement for development of SMART beam form. The result of this study shall be used for the development of SMART form work system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.203-204
• /
• 2014

Unlike other members, beams have various cross-sections and they have an important role of delivering the load of slabs. A beam form neighbors the columns and slabs, which makes it difficult to be installed. In a conventional way to exclusively use the form after concrete pouring, the form and a support should be both removed. Then, the support should reinstalled to sustain the stripping time of form, resulting in a structural issue. To solve such structural problem, the study proposes SMART beam form that uses filler panels and supports for filler. The floor filler panels and supports for filler are not removed after concrete curing, to conform to the stripping time of supports. Thus, any structural problem such as cracks and reduction of compressive strength owing to the gap of load bearing capacity can be prevented. The study results will be used as cases for studies on productivity analyses.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.197-198
• /
• 2014

The concrete work of bridge decks is performed in a high place, which may reduce safety and productivity. In addition, the conventional method for deck forms require a great deal of manpower, and a form (sheathing) board is damaged when removed after curing. As a result, the concrete deck work of bridge construction becomes the cause of delayed construction and increased cost. To solve these problems, SMART form, a system form, is developed. SMART form is a temporary device for easier installation and removal, by mounting it to the lower flange of a bridge girder and using a mechanical behavior of the form system for deck concrete pouring. For stable installation and removal of the developed SMART form, geometric behaviors should be analyzed to prove its validity. Furthermore, the validity of geometric behaviors when the SMART form size is altered in response to the various arrangement of bridge girders should be proved. Thus, the study is intended to analyze the geometric validity of the form system for bridge deck concrete pouring. The structural stability of the form system for bridge deck concrete pouring can be secured, which will be applied in the field.

• Journal of Information Technology Applications and Management
• /
• 제20권4호
• /
• pp.165-189
• /
• 2013

The advance of the smart working environment came the expectation that it would innovate and revolutionize the way people work, particularly in a society where smart work is readily available for creating a collaborative and 'connected' business. One of the core infrastructure elements for making smart work a viable option is the smart work center, the promotion of which requires a new form of 'smart work center business model' that can satisfy the purposes of both public services and private businesses. This calls for collaboration between the public and private sectors. Recently a number of businesses have been making significant headway in the creation of a new environment for business support and collaboration by adopting a sharing economy business model in their offices. The so-called 'Coworking Space' is an advanced form of business environment in the emerging 'smart work' era, and comes with the benefits of reduced costs as a result of sharing office space and knowledge sharing through the use of human networks. This paper describes the framework of a 'smart work center business model based on the sharing economy' using a BMC (Business Model Canvas), with an understanding of the characteristics inherent to the smart work center and the sharing economy. It was on the basis of this framework that a smart work center model for business incubation and startup, a private smart work center model for childcare services, and a community marketplace model with a global network were developed.

• Smart Structures and Systems
• /
• 제13권2호
• /
• pp.319-341
• /
• 2014

A family of smart tuned mass dampers (STMDs) with variable frequency and damping properties is analyzed under harmonic excitations and ground motions. Two types of STMDs are studied: one is realized by a semi-active independently variable stiffness (SAIVS) device and the other is realized by a pendulum with an adjustable length. Based on the feedback signal, the angle of the SAIVS device or the length of the pendulum is adjusted by using a servomotor such that the frequency of the STMD matches the dominant excitation frequency in real-time. Closed-form solutions are derived for the two types of STMDs under harmonic excitations and ground motions. Results indicate that a small damping ratio (zero damping is the best theoretically) and an appropriate mass ratio can produce significant reduction when compared to the case with no tuned mass damper. Experiments are conducted to verify the theoretical result of the smart pendulum TMD (SPTMD). Frequency tuning of the SPTMD is implemented through tracking and analyzing the signal of the excitation using a short time Fourier transformation (STFT) based control algorithm. It is found that the theoretical model can predict the structural responses well. Both the SAIVS STMD and the SPTMD can significantly attenuate the structural responses and outperform the conventional passive TMDs.

• International Journal of Computer Science & Network Security
• /
• 제23권8호
• /
• pp.146-158
• /
• 2023

Smart City is gaining attention with the advancement of Information and Communication Technology (ICT). ICT provides the basis for smart city foundation; enables us to interconnect all the actors of a smart city by supporting the provision of seamless ubiquitous services and Internet of Things. On the other hand, Crowdsourcing has the ability to enable citizens to participate in social and economic development of the city and share their contribution and knowledge while increasing their socio-economic welfare. This paper proposed a hybrid model which is a compound of human computation, machine computation and citizen crowds. This proposed hybrid model uses knowledge-based crowdsourcing that captures collaborative and collective intelligence from the citizen crowds to form democratic knowledge space, which provision solutions in areas of civic innovations. This paper also proposed knowledge-based crowdsourcing framework which manages knowledge activities in the form of human computation tasks and eliminates the complexity of human computation task creation, execution, refinement, quality control and manage knowledge space. The knowledge activities in the form of human computation tasks provide support to existing crowdsourcing system to align their task execution order optimally.

• 패션비즈니스
• /
• 제22권6호
• /
• pp.94-104
• /
• 2018

The objective of this study was to develop a wearable systems that protect users, based on sensors that are easy to use, from accidents caused by harmful gases in the operator's poor working environment or the risk of ultraviolet rays during outdoor activities. By developing smart wappen with Light Emitting Diode (LED) light alarm function including UV sensor and gas sensor and central processing unit, systems that are applied to daily wear and work clothes to explore the possibility of user-centered, harmful environment monitoring products in real time were proposed. Each sensor was applied to sportswear and work clothes and the wappen system consisted of lightweight and thin form as a whole. Wappen to cover the device had one sheet cover on the front and another cover from the inside to form a sandwich like formation. Wappen was made in the same form as regular clothes that doesn't damage the exterior then a removable wappen system was developed using Velcro and snap methods to enable the separation of device or the exchange of batteries. De-adhesion method can occur in two ways, from the outside and from the inside, so the design is selected depending on the application. This study shows the significance of the development of sensor-based smart clothing, in that it presented a universal model for users.

• Journal of information and communication convergence engineering
• /
• 제3권4호
• /
• pp.176-178
• /
• 2005

This paper presents closed-form expressions for exact bit error rate of MSK and OQPSK systems employing an adaptive antenna array at base station to eliminate co-channel interference. The channels under consideration are AWGN and one-path flat Rayleigh fading with AWGN. Computer simulation is carried out to confirm the theoretical results.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.273-278
• /
• 2022

Uncertainty is increasing around the world due to COVID-19 and Ukraine crisis. In this situation, each company is making countless efforts to survive. In Korea, smart factory projects targeting small and medium-sized businesses with difficulties have been continuously promoted. As for the smart factory business that has been promoted so far, the base expansion of the smart factory is also steadily increasing as the number of companies carrying out the project is increasing. It was also found that it contributed to productivity improvement and quality improvement. Despite these positive aspects, difficulties and operational problems are also appearing in the process of promoting smart factories. In this study, we investigated and analyzed operational problems and difficulties in the process of promoting smart factories. In addition, improvement plans for problems were presented according to the contents of this analysis, and improvement plans were presented by classifying them into introduction and supply companies, considering that the smart factory business is formed in the form of a consortium between introduction and supply companies.

• 대한임베디드공학회논문지
• /
• 제8권1호
• /
• pp.11-16
• /
• 2013

With the development and general use of a variety of Android/iOS-based smart phones and smart pads, the existing e-learning contents need to be changed in such a way that they can be carried out on different smart device platforms. This paper shows what changes are needed for that aim, and, in particular, for the compatibility of different platforms by designing and implementing Android/iOS-based smart learning contents in the form of a hybrid app. This paper will hopefully help you consider what elements are required to develop smart-learning contents on a variety of platforms for mobile devices.