• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.5-8
• /
• 2004

Domestic city gas is supplying in an about 10 million household on present 34 city gas companies because is begun to supply regularly after two 1980 years middle. But, result that focus on city gas supply spread and stable supply for supply area and neglects about safety problem, hundreds casualties such as Ahyun explosion accident and Deagu city gas explosion accident were reached in situation that occurred large size calamity occurs it is dizzliness. In the case of advanced nation, can see that accomplish system and progress that in technology after experience major accident. Therefore, grasp problem investigating safety actual conditions for city gas institution and study about solvable plan is required this. Also, must guide reform and level elevation of a domestic company safety technology through induction and development of safety technology that is suitable in supply, domestic real condition etc. Must help in power positivity that is full text executing high-quality safety education about step High firing mechanism safety technology than present safety education.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.10 no.2
• /
• pp.29-37
• /
• 1973

Since 1967 the Towing Tank of Inha University has been planed constracted and was completed 1971. The size of the tank is 79m length, 5m width 3m depth. At one end of the tank, 18kw wave maker is installed which can produce regular and irregular waves, max. 6m length 40cm height. The towing carriage is driven by four 2.2kw motor and reuglated by electronic speed regulator, and it's max. towing speed is 2.5m/sec, resistance dynamometer and some other instruments including clamp, towing guide etc. are designed and made by us. Here under, the authors wish to give some details of facilities and calibrated performance of the towing carriage, wave maker and resistance measuring system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.4
• /
• pp.254-268
• /
• 2013

For real-world clustering tasks, the input data is typically not easily separable due to the highly complex data structure or when clusters vary in size, density and shape. Kernel-based clustering has proven to be an effective approach to partition such data. In this paper, we provide an overview of several fuzzy kernel clustering algorithms. We focus on methods that optimize an fuzzy C-mean-type objective function. We highlight the advantages and disadvantages of each method. In addition to the completely unsupervised algorithms, we also provide an overview of some semi-supervised fuzzy kernel clustering algorithms. These algorithms use partial supervision information to guide the optimization process and avoid local minima. We also provide an overview of the different approaches that have been used to extend kernel clustering to handle very large data sets.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.3
• /
• pp.29-36
• /
• 2011

The purpose of this study was analyzing with present conditions and content analysis of the parking area for the handicapped people. The researcher investigate to that establishment ratio, accessibility, the induction and guidance, and safe walking passage security, and proper space of the parking area for the handicapped people was established by lawfully. The results as follows. In spite of the regulation established by law, regulations was not established 40% on region government. The parking area for the handicapped people established Properly consider to the accessibility. But the size and height of the stand-up guide plate of the induction and guidance which corresponds in legal establishment standard of the handicapped people. then this research analyzes problems and suggests alternatives of the facilities.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.176-181
• /
• 2003

The cross-flow fans are widely used in various applications, due to their large capacity of mass flow and the size compactness. The flow fields of the cross-flow fan is, however, complex and it has many design parameters. Thus the general design guide has not sufficiently established yet, and the design strategies of cross-flow fans have been based on experiments. In the present study, the cross-flow fan performance and its two-dimensional flow characteristics are numerically analyzed by using the STAR-CD. The simulation is done by varying the several design parameters such as impeller blade shapes, the gap between the stabilizer and impeller. The computational results are compared with the experimental data at the fan outlet region. Finally some helpful guides for the optimum design of the cross-flow fan are proposed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.203-204
• /
• 2017

In case of developing a guide-rail type window cleaning robot, only the first prototype has been developed. In this study, it was considered that the size and the load of the window cleaning robot was not optimized, and through the structural analysis of the self-weight of the window cleaning robot, the stress concentration area was derived and the concentrated stress was quantified. Analysis showed that the upper rail shaft had a bending stress of 9.964Mpa and the bolt had a shear stress of 19.544Mpa. The results of this study will be used as basic data for designing future prototypes.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2357-2359
• /
• 2005

In this paper, we analyzed the effect of flip chip interconnect which is a part of FC-BGA package on the transmission characteristics of interconnect. We designed simple interconnect model and analyzed the change of the transmission characteristics as the size of each component change. And we provided design guide of interconnect which shows more enhanced results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.226-231
• /
• 2003

There have been many attempts to make kart chassis domestically to lower the price of complete kart. However nobody made a successful chassis due to the lack of understanding the characteristics of kart chassis frame. In this work, a baseline chassis frame under the bending and torsional load is studied. Design target is that the baseline chassis frame is quite adequate not only for the beginners but also for the beginning racers. Results from the analysis are used as a guide to design or modify the baseline chassis with the goal of proper torsional stiffness. Minimum increase in weight is being forced. As a result, the baseline chassis frame was designed, made, and tested. Based on the design results, complete karts are being manufactured by the small 1 size domestic company and these karts are being sold and run in the market.

• Journal of Power Electronics
• /
• v.13 no.6
• /
• pp.919-927
• /
• 2013

This paper proposes a Boundary Current Mode (BCM) control scheme to realize soft switching on a conventional single phase full bridge DC/AC inverter. This technique with the advantages of no auxiliary components, low cost, high efficiency, and simple in control, is attractive for micro-inverter applications. The operation principle and characteristic waveforms of the proposed soft switching technique are analyzed in theory. A digital controller is provided based on that theory. To balance the requirements of efficiency, switching frequency, and inductor size, the design considerations are discussed in detail to guide in BCM inverter construction. A 150W prototype is built under these guidelines to implement the BCM control scheme. Simulation and experiment results demonstrate the feasibilities of the proposed soft switching technique.

• Journal of Korean Society of Rural Planning
• /
• v.4 no.1
• /
• pp.86-97
• /
• 1998

It is neceesary to evaluate the location suitability of protected cultivation facilities to guide reasonable protected cultivation. The evaluation system could help plan new protected cultivation facilities in rural areas. In this study, an assessment was made for the facilities located in three different selected regions: suburban, plain, and mountainous. The assessment was performed based on spatial characteristics of protected cultivation facilities such as land category, size of protected cultivation facilities, land shape, stoniness, land consolidation level, soil drainage, land slope, topography, effective soil depth, zoning or not of agricultural development area, irrigation and drainage condition, distance from roads, and so forth. The results showed that there were significant differences in locational characteristics among the three regions.