• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.3
• /
• pp.317-324
• /
• 2015

The design of anchorage zone in a post-tensioned member has been started from the evaluation of the ultimate resisting capacity as well as the maximum bursting stress developed, and a lot of design codes including AASHTO and PTI describe their design equations to determine the bearing strength of concrete at the anchorage zone. However, these equations usually give conservative results because their derivation is based on the simple anchorage with a wide bearing plate in the surface without any additional consideration for the load transfer mechanism through transverse ribs on the anchorage. To assess the influence of geometric parameters related to the transverse ribs on the resisting capacity of anchorage block, experiments and analysis are conducted. After verifying the validity of numerical model conducted through correlation studies between experimental and analytical results, parametric studies with changes in the transverse ribs are followed and design recommendations for the anchorage block are suggested from the numerical results obtained.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.79-86
• /
• 2015

This research proposed a design direction for the ambulance interior storage space based on the placement and access to the equipment to facilitate an emergency medical practice taking into account the safety and efficiency by the emergency medical technician ergonomic factors. Therefore, through a field survey for the current derivation of the storage space problem 'placement', 'enable', 'management' like these three items resulting clarity, accessibility, simplicity and functionality of the four functional elements by targeting ambulances in operation in this country. First, there is a need to improve standardized of cabinet sizes fit to loaded meet emergency equipment standards. Currently, the equipment designed to use a simple storage cabinet has had problems in the usability. Second, it must be located in the continuous exposure in progress to the user's traffic line. Third, the problem was the insufficient function of the cabinet to ensure the safety of patients by paramedics from the emergency rescue equipment and due to the leaning of the ambulance driving. Besides, it was pointed out that in addition to the proposed alternatives, including the agenda, states that safety belt replacement equipment, emergency personnel and patients with the handle of a guardian for the efficient use storage space within the 119 ambulance. However, in the present study suggest that there is a state proceeds mainly limited usability in the field, having been installed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1565-1576
• /
• 2002

By way of driving a 2-way on/off solenoid hydraulic valve with a pulse width modulation (PWM) signal, control of the pressure in a certain volume is frequently used in various applications. However, the pressure built-up according to the duty ratio and carrier frequency of the PWM signal is not so well understood. In order to clarify the characteristics of 2-way valve hydraulic pressure control systems, in this paper two formula fur the mean and ripple of the load pressure were derived through theoretical analysis. And the accuracy of the derived formula were verified by comparison with the experimental test result. Generally 2-way valve systems are constructed as a bleed-off circuit, while 3-way valves are used as a control element in a meter-in circuit pressure control system. In a bleed-off circuit, the system supply pressure from a hydraulic power pack does not remain constant, but changes according to their external load. In turn, the relief valve in the hydraulic power pack reacts accordingly showing complicated dynamic behavior, which makes an analytical study difficult. In order to resolve the problem, simple but accurate empirical dynamic models fer a bleed-off system were used in the course of formula derivation. As the result, selection criteria for two major control parameters of the driving signal is established and the basic strategy to suppress the unnecessary pressure fluctuation can be provided for a hydraulic pressure control system using a 2-way on/off solenoid valve.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.699-708
• /
• 1997

The effective unsaturated hydraulic conductivity in stratified soils is evaluated using a three-dimensional stochastic approach. Because of the disparity of the correlation scales in a stratified soil, the general stochastic equations are simplified. This allows analytical evaluation of generic expressions for the effective hydraulic conductivities. Simple asymptotic expressions, valid at particular ranges(wetting front, drying condition, wetting condition) of the mean flow characteristics, are also derived. An example of applying the derived theoretical result to a imaginaryl clay soil is presented. It reveals found that the effective unsaturated hydraulic conductivity showed large-scale hysteresis. Such large-scale hysteresis was produced by the spatial variability of hydraulic soil properties rather than hysteresis of the local parameters. In addition the results show that the effective hydraulic conductivities were larger in the case of accommodating heterogeneity of soil preperties rather than neglecting heterogeneity of soil properties.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.47-55
• /
• 2002

This paper proposes a new improved lumped element equivalent circuit analysis method to analyze withdrawal weighted SAW resonators of irregular electrode configurations, which enables to calculate the frequency response of withdrawal weighted SAW resonators. This method has led to the derivation of Smith equivalent circuit's y-parameters for a single ground electrode and formulated the resonator's admittance by calculating the total current into an IDT assembly. To illustrate the effectiveness of the technique, this method was applied to the design of a simple ladder filter and the change of the filter performance was investigated in relation to the weighting of the series and parallel resonators, respectively. The results shows that the withdrawal weighted resonator ladder filters provide better performance in their bandwidth and transition characteristics than normal ones. This new equivalent circuit analysis method can also serve as a better tool to design and analyze general SAW resonator filters.

• The Journal of the Korea Contents Association
• /
• v.12 no.3
• /
• pp.34-43
• /
• 2012

Determining the similarity between two strings can be applied various area such as information retrieval, spell checker and spam filtering. Similarity calculation between Korean strings based on dynamic programming methods firstly requires a definition of the similarity between phonemes. However, existing methods have a limitation that they use manually set similarity scores. In this paper, we propose a method to automatically calculate inter-phoneme similarity from a given set of variant words using a PAM-like probabilistic model. Our proposed method first finds the pairs of similar words from a given word set, and derives derivation rules from text alignment results among the similar word pairs. Then, similarity scores are calculated from the frequencies of variations between different phonemes. As an experimental result, we show an improvement of 10.1%~14.1% and 8.1%~11.8% in terms of sensitivity compared with the simple match-mismatch scoring scheme and the manually set inter-phoneme similarity scheme, respectively, with a specificity of 77.2%~80.4%.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.475-481
• /
• 2016

In this paper, the new stability condition of linear discrete interval time-varying systems with time-varying delay time is proposed. The considered system has interval time-varying system matrices for both non-delayed and delayed states with time-varying delay time within given interval values. The proposed condition is derived by using Lyapunov stability theory and expressed by very simple inequality. The restricted stability issue on the interval time-invariant system is expanded to interval time-varying system and a powerful stability condition which is more comprehensive than the previous is proposed. As a results, it is possible to avoid the introduction of complex linear matrix inequality (LMI) or upper solution bound of Lyapunov equation in the derivation of sufficient condition. Also, it is shown that the proposed result can include the many existing stability conditions in the previous literatures. A numerical example in the pe revious works is modified to more general interval system and shows the expandability and effectiveness of the new stability condition.

• Economic and Environmental Geology
• /
• v.30 no.1
• /
• pp.1-14
• /
• 1997

The shales from the Euiseong area are interbedded along the bedding in Cretaceous Gyeongsang Supergroup, which are composed mainly of quartz, plagioclase, K-feldspar and associated with trace amount of biotite, muscovite, chlorite, pyrite, hematite, carbonate and clay minerals. The ratio of $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ in shales from the Shindong Group are ranged from 9.16 to 24.32 and from 1.70 to 5.97, and the Hayang Group ranged from 2.76 to 8.89 and from 0.42 to 2.74, which are negative correlated between $K_2O/Na_2O$ and $Al_2O_3/Na_2O$ against $SiO_2/Al_2O_3$ respectively. Those are suggested that controlled of mineral compositions in shales due to substitution and migration of elements by sedimentation and diagenesis. These shale formation were deposited in basin of terrestrial environments originated from the igneous rocks, and the REE of these rocks are not influenced with diagenesis and hydrothermal alterations on the basis of $Al_2O_3$ versus La, La against Ce, Zr versus Yb, the ratios of La/Ce (0.43 to 0.62) and Th/U (1.11 to 10.71). The narrow range in trace and REE element characteristics as Co/Th (0.63 to 1.92), La/Sc (1.98 to 5.90), Sc/Th (0.58 to 1.30), V/Ni (0.90 to 3.25), Cr/V (0.45 to 1.78), Ni/Co (1.88 to 6.67) and Zr/Hf (30.04~60.87) of these shales argues for inefficient mixing of the simple source lithologies during sedimentation. These rocks also show much variation in $La_N/Yb_N$ (6.90 to 17.02), Th/Yb (4.17 to 13.68) and La/Th (1.98 to 5.90), and their origin is explained by derivation from a mixture of intermediate to acidic igneous rocks.

• Journal of Korea Water Resources Association
• /
• v.41 no.6
• /
• pp.587-595
• /
• 2008

In order to aid the derivation of the IDF relationship for a station with insufficient duration-rainfall data, an approach to derive a simple and practical IDF formula is presented. The IDF formula is described simply by the term of the two parameters and a design frequency. The model parameters were estimated from a statistical technique based on the normal distribution of transformed rainfall intensities. In order to give the transformed data, both the Kruskal-Wallis statistic and the Manly transformation of duration-rainfall data were adopted. With the methods, the proposed IDF formula becomes a simpler model that compares well with conventional form. In addition, it allows avoiding an exceptional condition of the higher rainfall intensity for longer duration. The performance of the proposed formula was evaluated by using the limited rainfall data for short duration from two gauge stations. The result showed that the IDF formula developed in this work was an effective tool, providing a reliable relationship between the intensity and duration even though insufficient data are only available.

• Journal of Broadcast Engineering
• /
• v.8 no.1
• /
• pp.37-44
• /
• 2003

The standard approach to signal resampling is to fit the original image to a continuous model and resample the function at a desired rate. We used the compact B-spline function as the continuous model which produces less oscillatory behavior than other tails functions. In the case of nonuniform resampling based on a B-spline model, the digital signal is fitted to a spline model, and then the fitted signal is resampled at a space varying rate determined by the transformation function. It is simple to implement but may suffer from artifacts due to data loss. The main purpose of this paper is the derivation of optimal nonuniform resampling algorithm. For the optimal nonuniform formulation, the resampled signal is represented by a combination of shift varying splines determined by the transformation function. This optimal nonuniform resampling algorithm can be verified from the experiments that It produces less errors.