• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.415-418
• /
• 2011

Thermal fatigue is one of the life-limiting damage mechanisms in the nuclear power plant conditions. The turbulent mixing of fluids of different temperatures induces rapid temperature changes to the pipe wall. The successive thermal transients cause varying cyclic thermal stresses. These cyclic thermal stresses cause fatigue crack nucleation and growth similar to the cyclic mechanical stresses. The aim of this study was to fulfil the need by developing an real crack manufacturing method, which would produce realistic cracks. The test material was austenitic STS 304, which is used as pipelines in the reactor coolant system of a nuclear power plants. In order to fabricate thermal fatigue crack similar to realistic crack, successive thermal transients were applied to the specimen. Thermal transient cycles were combined with heating (60sec) and cooling cycle (30sec). And, In order to identify ultrasonic characteristic, it was performed the ultrasonic reflection measuring method for the fabricated specimen. From the results of ultrasonic reflection measuring testing, it was conformed that A-scan results(average 83% of real crack depth) for the TFC reference specimen was more enhanced NDT reliability than results(average 38% of real crack depth) for the EDM notch reference specimen.

• Structural Engineering and Mechanics
• /
• v.36 no.4
• /
• pp.481-497
• /
• 2010

The shaking table tests were conducted on two small-scale models (Model 1 and Model 2) to examine the earthquake-induced damage of a concrete gravity dam, which has been planned for the construction with the recommendation of the peak ground acceleration of the maximum credible earthquake of 0.42 g. This study deals with the numerical simulation of shaking table tests for two smallscale dam models. The plastic damage constitutive model is used to simulate the crack/damage behavior of the bentonite-concrete mixture material. The numerical results of the maximum failure acceleration and the crack/damage propagation are compared with experimental results. Numerical results of Model 1 showed similar crack/damage propagation pattern with experimental results, while for Model 2 the similar pattern was obtained by considering the modulus of elasticity of the first and second natural frequencies. The crack/damage initiated at the changing point in the downstream side and then propagated toward the upstream side. Crack/damage accumulation occurred in the neck area at acceleration amplitudes of around 0.55 g~0.60 g and 0.65 g~0.675 g for Model 1 and Model 2, respectively.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.13-18
• /
• 2004

The objective of this study is to investigate fracture toughness and fatigue crack propagation behavior in the Reduced Activation Ferritic Steel (RAFs) JLF-I. The fracture toughness tests were performed with various size(plane size and thickness) and various side groove of specimens. The fatigue crack propagation behavior of the JLF-I steel was investigated by the constant-amplitude loading test for the stress ratios R=O.I, 0.3 and 0.5 respectively. The effects of stress ratios and specimen size on the fatigue crack growth behaviors for JLF-I steel were discussed within the Paris law. The test results showed the standard CT specimen with the side groove of 40 % represented a valid fracture toughness. The fracture resistance curve increased with increasing plane size and decreased with increasing thickness. However, the fracture resistance curve of half size specimen was similar to that of the standard specimen. The fatigue crack propagation rate of a half size specimen was similar to that of a full size specimen at the stress ratios of 0.1, 0.3 and 0.5 respectively. The fatigue crack propagation behavior of this material were evaluated by using a half size specimen.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.2
• /
• pp.1-8
• /
• 2007

This study is to generate optimal values of brightness and achieve more realistic images by varying such values according to individual materials in order to create better quality simulation images using Lightscape. Because there are discolorations of materials by adding the radiation of luminaires to that of daylight during the daytime, when low brightness values are inputted in case of daytime, the results are founded that images of materials can be seen much similar with real images. And in most of the materials, when low values in the daytime and high values in the nighttime are inputted this study verifies that the realest simulation images can be obtained using Lightscape, because the RGB data of simulation images are almost similar with that of real materials.

• Journal of Surface Science and Engineering
• /
• v.48 no.1
• /
• pp.23-26
• /
• 2015

What causes the transformation of a solar cell is the behavior difference of thermal expansion occurred between the substrate and the layer of semiconductor used in the solar cell. Therefore, the substrate has to possess a behavior of thermal expansion that is similar with that of semiconductor layer. This study employed electroforming to manufacture Fe-Ni alloy materials of different compositions. To verify the result from a finite element analysis, a two-dimensional Mo substrate was calculated and its verification experiment was conducted. The absolute values from the finite element analysis of Mo/substrate structure and its verification experiment showed a difference. However, the size of residual stress of individual substrate compositions had a similar tendency. Two-dimensional CIGS/Mo/$SiO_2$/substrate was modeled. Looking into the residual stress of CIGS layer occurred while the temperature declined from $550^{\circ}C$ to room temperature, the smallest residual stress was found with the use of Fe-52 wt%Ni substrate material.

• Journal of Ginseng Research
• /
• v.30 no.2
• /
• pp.78-81
• /
• 2006

Freshly harvested, immature (green) seeds of North American ginseng (Panax quinquefolius L.) were stratified for up to 3 years in plastic pails in controlled environment rooms at $5{\pm}1^{\circ}C$ for 9 months and then $21{\pm}2^{\circ}C$ for 3 months (Trt. 1, regular stratification), or continuously at $-2{\pm}0.2^{\circ}C$ (Trt. 2), or continuously at $3{\pm}0.2^{\circ}C$ (Trt. 3). During stratification at -2 and $3^{\circ}C$ embryos did not grow. On seeding in the field embryos grew rapidly and resultant seedlings were comparable to those from regularly stratified seed. Seedling emergence rate was acceptable at the industry expected rate of 68% after one year of storage, but not after two years storage when it declined to 17.5%. Seed rot was so severe in year 3 that no planting was carried out. Seedling and second year growth were similar at the three stratification temperatures; most importantly, root dry weight (economic yield) was similar. Low-temperature storage of freshly-harvested North American ginseng seed is an acceptable method for short-term retention of propagating material.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.232-238
• /
• 2021

The development of a low cost catalyst with high performance and small amount of carbon deposition on catalyst from toluene steam reforming were investigated by using coal ash as a support material. Ni-loaded coal ash catalyst showed similar catalytic activity for toluene steam reforming compared with the Ni/Al2O3. At 800 ℃, the toluene conversion was 77% for Ni/TAL, 68% for Ni/KPU and 78% for Ni/Al2O3. Ni/TAL showed similar toluene conversion to Ni/Al2O3. However, Ni/KPU produced higher hydrogen yield at relatively lower toluene conversion. Ni/KPU catalyst showed a remarkable ability of suppressing the carbon deposition. The difference in coke deposition and hydrogen yield is due to the composition of KPU ash (Ca and Fe) which increase coke resistance and water gas shift reaction. This study suggests that coal ash catalysts have great potential for the application in the steam reforming of biomass tar.

• Journal of Surface Science and Engineering
• /
• v.55 no.6
• /
• pp.403-407
• /
• 2022

Grain size of material is important factor in evaluating mechanical properties. Methods for grain size determination are described in ASTM grain size standards. However, conventional method require pretreatment of the surface to clarify grain boundaries. In this study, the grain size from the surface image obtained from scanning electron microscope was measured using the watershed algorithm, which is a region-based method among image segmentation techniques. The shapes of the crystals are similar to each other, but the size and growth height are different. In addition, crystal grains are adjacent to each other, so it is very similar to the shape image of the topography. Therefore, grain boundaries can be efficiently detected using the Watershed algorithm.

• Korean Journal of Metals and Materials
• /
• v.49 no.3
• /
• pp.250-255
• /
• 2011

The basic properties and electrical characteristics of sputtering films deposited with a commercial cast target and Spark Plasma Sintering (SPS) were compared and analyzed. From the results, the Cu film prepared heating $60^{\circ}C/min$ (SPS process) showed a similar specific resistance compared to the commercial cast Cu film. Also, auording to the results of XRD, SIMS, and TEM. There was not much difference in the crystal structure and impurities between the two films. Consequently, the SPS Cu target was found to have quite similar properties with the commercial one and it is expected to be applied in futare research to the metal wiring material for semiconductor/display devices.

• Journal of the FoodService Safety
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2022

As one of the post-COVID-19 response strategies, representative processed products derived from the natural plant material flaxseed and a dietary supplement fortified with female hormones (estrogens) were developed in Canada, an eco-friendly country was introduced. These products were: 1) flaxseed oil to help maintain cognitive and immune function, 2) Lignan50, a substance with effects similar to estrogen, a female hormone, 3) XanFlax, a thickener for confectionery/baking and egg substitute, 4) MediFlax, a constipation reliever, 5) SesaFlax, which has a fragrance similar to sesame, 6) Linusorb, which is effective for its pharmaceutical anti-inflammatory/anti-oxidation and anti-aging properties, and 7) LinuLyte, a water/electrolyte supplement containing high dietary fiber. It is expected that these dietary products will help maintain and promote health as part of a response to the COVID-19 pandemic.