• 자원환경지질
• /
• 제44권3호
• /
• pp.203-215
• /
• 2011

오염된 토양의 정화방법을 선정은 토양의 지화학적 및 광물학적 특성에 근거하여 선정되어야 오염된 토양을 적절하게 정화할 수 있다. 따라서 이 연구는 비소로 오염된 토양의 적절한 정하방법 선정을 위하여 비소의 존재형태를 알아보기 위하여 토양의 지화학적 및 광물학적 특성을 연구하였다. 이 연구를 위하여 전남 광양지역의 초남 금 광산의 비소로 오염된 토양을 이용하였다. 비소오염 토양의 지화학적 및 광물학적 특성을 알아보기 위하여 입도분리, 연속추출, 그리고 광물학적 분석을 실시하였다. 입도분석 결과에 따르면 비소오염토양의 무게백분율은 모래가 17-36%, 미사가 25-54%, 점토가 9-28%이며, 토성은 사양토(sandy loam), 양토(loam), 미사질 양토 (silt loam)로 나타났다. 토양의 pH는 폐 금광산 갱구 앞 토양이 4.5-6.6.으로 강산성내지 약산성을 띠었다. 비소오염 토양의 각 입도에 비소분포는 모래에 9-81%, 미사에 9-67%, 점토에 7-28% 분포하고 있었다. 연속추출 실험 결과, 비소는 철 산화물을 추출했을 때 1-75%로 검출되었으며, 추출 후 잔여물에 12-91% 잔존하고 있었다. 모래와 미사의 주 구성광물은 고령석, 사장석, 석영, 운모로 나타났으며, 부 구성광물은 철 산화물이다. 점토의 주 구성광물은 고령석, 석영, 운모, 질석이며, 부 구성광물은 철 산화물과 금홍석 은이다. 또한 점토 내 철 산화물과 운모에서 비소가 발견되었다. 이러한 결과는 비소가 철 산화물 또는 점토 광물 등에 흡착 또는 공침하여 존재하는 것으로 사료된다. 이는 비소로 오염된 토양의 지화학적 특성과 광물학적 특성을 통해 오염된 토양을 정화하는데 정보를 제공할 수 있을 것으로 사료된다.

• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.109-115
• /
• 1997

Laser cladding is a technique for modification of metal surface. In this laser cladding experiment a metal powder feeding system was developed for more efficient laser cladding. This system can reduce processing time and be used simpler than the conventional method. The feeding of metal powder has given a rise to the process for sequential buildup of bulk rapidly solidified materials in the form of fine powder stream to the laser cladding process. The parameters of laser cladding have been investigated using this experimental equipment. Bronze on aluminum alloy and copper on aluminum alloy were experimented by using defocused beam, powder feeding system, and gas shielding. Good cladding was achieved in the range of beam travel speed of 2.25m/min. In the case of copper/aluminum and bronze/aluminum substrate, the absorption of laser beam was too high to produce low diluted clad. In the case of copper/1050 aluminum, the optimal laser cladding condition was of laser power of 2.8kW, powder feed rate of 0.31g/s and beam travel speed of 2.25m/min. In the case of bronze/aluminum the optimal condition is of laser power of 2.5kW, powder feed rate of 0.31g/s, and beam travel speed of 2.36m/min.

• 한국실내디자인학회논문집
• /
• 제20권1호
• /
• pp.14-23
• /
• 2011

The purpose of this study is to analyse the inclinations and expressions in contemporary architecture. Specially, we call this tendency and architectural movements as architectural metamorphosis. Metamorphosis in architecture present the core of the change of Forms and spirits in a change of outward shape and terrestrial identity. As in Ovid's extended dramatic poem of change and transformation, Metamorphoses, all Souls are deathless, and migrates from one form to another. Like these stories in Metamorphoses, Ovid tells the soul never dies, but leaps one form to anther, and can take any shape. So the architectural form, transformation and deformation in contemporary architecture means architectural sensations and cognitions can even approach the soul of form and shape under the transformation. The expressions and design strategies of metamorphosis in comtemporary architecture reveal continuous and sequential formations of space, linear structure with force and vector, rhythmical wavement and folding surface, lively wiggly flows of volumns and objects, and so on. Such qualities came from the periodical needs; separation of structure and surface, poly-surfacial movement, poly-sensual expression and experience, dematerialization and the dematerialized space, formless of non-formal architecture, digital architecture. Architecture of Metamorphosis is the ways and the needs of our period to overcome the static limits prohibits the liberal thoughts, to find the ways toward the opportunities and diversities and to unlock the imaginaire of the contemporary architecture.

• 대한토목학회논문집
• /
• 제31권3B호
• /
• pp.211-220
• /
• 2011

본 연구에서는 유역 물수지 모의를 위한 개념적인 토양수분모형이 제안된다. 모형은 지표면에 떨어지는 강수량이 지표면 유출, 습윤, 기화, 침루 등으로 분할되는 과정을 모의한다. 경험식으로 추정된 연별 기화량, NRCS-CN 방법으로 추정된 월별 습윤량 및 이 두 가지가 모두 주어진 경우를 구분하여 모형의 매개변수가 각각 추정되어 모형의 성능을 평가한다. 연별 기화량과 월별 습윤량 자료 모두가 모형 보정에 적용될 경우만이 보다 합리적인 강수분할이 모의될 수 있음이 분석된다.

• 천문학회보
• /
• 제35권1호
• /
• pp.69.1-69.1
• /
• 2010

IC 443 is famous for its interaction with nearby molecular clouds and intense H2 emission lines in infrared. Therefore, it has been studied extensively for the understanding of molecular shocks. We observed H2 mission lines toward the shock-cloud interaction regions of IC 443, known as clumps B, C, and G. The observations were performed with the InfraRed Camera (IRC) onboard a satellite AKARI over 2.5-5.0 um, where previous space observations, e.g. Infrared Space Observatory (ISO) and Spitzer, do not cover. Our AKARI observations provide spectra of sequential pure-rotational and ro-vibrational H2 emission lines. For the clumps C and G, combining with previous mid-infrared observational results, we found that the H2 level populations show a significant separation between v=0 and v=1 levels; v=1 levels are under-populated than v=0 levels, therefore, the population cannot be described by two temperature LTE model, as many people have analyzed for the shocked H2 gas. We also applied the thermal admixture model, dN(H2; T)~T^(-b) dT, with varying ortho-to-para ratios according to the temperature, to describe the level population, and obtained plausible ranges of the H2 gas density and power-law index b.

• BMB Reports
• /
• 제29권4호
• /
• pp.335-342
• /
• 1996

Porcine liver cysteinesulfinic acid decarboxylase was purified approximately 460-fold by means of ammonium sulfate fractionation and sequential column chromatographic separation with Sephadex G-100, DEAE-cellulose and hydroxylapatite. The enzyme has a flat pH profile with maximum activity occurring between pH 6.0 and 7.6. Pyridoxal 5'-phosphate must be present in all buffers used for purification procedures in order to stabilize the enzyme. Addition of sulfhydryl reagents such as 2-mercaptoethanol are also necessary to maintain maximum enzyme activity throughout purification. The absorption spectrum shows that cysteinesulfinic acid decarboxylase is a pyridoxal 5' -phosphate-containing protein. The major absorption is at 280 nm with two smaller absorption regions, one at 425 nm which is ascribed to a Schiffs base between pyridoxal phosphate and protein, and another at 325 nm which is thought to be due to the interaction of 2-mercaptoethanol with the Schiffs base. A number of divalent cations tested did not affect enzyme activity with the exception of mercury, copper, and zinc which are inhibitory. The partially purified enzyme has an apparent $K_m$ of 0.94 mM for cysteinesulfinate. Cysteic acid is a competitive inhibitor of the enzyme with a $K_i$ of 1.32 mM. The molecular weight of the enzyme was estimated to be about 79,600 by using Sephadex G-200 column chromatography.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2921-2924
• /
• 2013

Immunoliposomes (antibody-conjugated liposomes) are highly useful as both a drug carrier in drug delivery and as a reporting probe in immunodiagnostics. However, antibody conjugation is lengthy and cumbersome, because this includes several steps such as derivatization of the antibody, conjugation of the derivatized antibody to liposomes, and separation of the unbound antibodies from immunoliposomes. Recently, liposome preparation steps have simplified by using microfluidic devices (${\mu}FDs$) where liposomes are formed when a stream of lipids in solvent is hydrodynamically focused between two oblique buffer streams in a microchannel. Herein, we report a simple method for the production of immunoliposomes (rabbit IgG-conjugated liposomes) using microvalve-controlled ${\mu}FD$. The presence of antibody on the liposome was verified by observing the binding of immunoliposomes to rabbit IgG on the surface. The results suggest that immunoliposomes can be easily prepared through sequential mixing of antibody, conjugation reagents, preformed liposomes using microvalve-controlled ${\mu}FD$.

• Journal of Communications and Networks
• /
• 제14권5호
• /
• pp.481-486
• /
• 2012

Accurate and efficient estimation of the number of sources is critical for providing the parameter of targets in problems of array signal processing and blind source separation among other such problems. When conventional estimators work in unfavorable scenarios, e.g., at low signal-to-noise ratio (SNR), with a small number of snapshots, or for sources with a different strength, it is challenging to maintain good performance. In this paper, the detection limit of the minimum description length (MDL) estimator and the signal strength required for reliable detection are first discussed. Though a comparison, we analyze the reason that performances of classical estimators deteriorate completely in unfavorable scenarios. After discussing the limiting distribution of eigenvalues of the sample covariance matrix, we propose a new approach for estimating the number of sources which is based on a sequential hypothesis test. The new estimator performs better in unfavorable scenarios and is consistent in the traditional asymptotic sense. Finally, numerical evaluations indicate that the proposed estimator performs well when compared with other traditional estimators at low SNR and in the finite sample size case, especially when weak signals are superimposed on the strong signals.

• 청정기술
• /
• 제16권1호
• /
• pp.64-70
• /
• 2010

본 연구에서는 상용 폴리실리콘 제조공정 중 삼염화실란 정제공정에 사용되는 증류탑에 대해 분리벽형 증류탑을 적용하는 방안을 제안하였다. 상용 전산모사 프로그램(HYSYS)을 통해 기존의 단순 증류탑을 사용한 정제공정과 분리벽형 증류탑으로 대체한 공정을 각각 전산모사 하여 같은 순도와 수율로 삼염화실리콘을 정제할 때 증류탑에서 소모되는 에너지와 투자비용 효과를 비교 분석하였다. 그 결과, 분리벽형 증류탑을 적용한 정제공정이 기존 정제공정에 비해 약 61%의 에너지 절감 효과와 58%의 투자비용 절감효과를 가지는 것으로 확인되었다.

• 멤브레인
• /
• 제32권6호
• /
• pp.456-464
• /
• 2022

본 실험에서는 무전해 도금을 통하여 Pd 및 Pd-Cu 분리막을 제조하여 수소 투과 성능을 분석하였다. 분리막의 지지체는 α-Al₂O₃ 세라믹 중공사를 사용하였다. Pd-Cu 분리막은 무전해 도금을 실시하였고 Pd-Cu 합금을 만들기 위하여 수소 분위기에서 500°C, 18 h 동안의 열처리 과정을 거쳤다. 그 후, Pd-Cu 분리막은 EDS (Energy Dispersive X-ray Spectroscopy), XRD (X-ray Diffraction) 분석을 통해 합금이 형성된 것을 확인하였다. Pd 및 Pd-Cu 도금층의 두께는 SEM (Scanning Electron Microscope) 분석을 통해 각각 약 3.21, 3.72 µm으로 측정되었다. 수소 투과 성능은 수소 단일 가스, 혼합가스(H₂, N₂)에서 350~450°C, 1~4 bar의 범위에서 수소 투과 실험을 진행하였다. 수소 단일 가스에서 Pd 및 Pd-Cu 분리막은 450°C, 4 bar에서 최대 54.42, 67.17 ml/cm²⋅min의 flux를 가지며, 혼합가스에서는 450°C, 4 bar의 조건일 때, 각각 1308, 453의 separation factor가 나오는 것을 확인하였다.