• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.35-38
• /
• 2008

A pattern master and a Ni stamper for 50nm class of patterns are fabricated through e-beam lithography and Ni electroforming process. A model pattern set is designed, which is based on unit patterns of 50nm, 100nm, 150nm and 200nm in length and 50nm in width. The e-beam process is optimized to fabricate designed patterns with some parameters including dose, accelerating voltage, focal distance and developing time. For Ni electroforming to fabricate Ni stamper, a seed layer, a conducting layer, is deposited first on the pattern master fabricated by an e-beam lithography process. Ni, Ti/Ni and Cr are first tested to find optimal seed layer process. Currently the best result is obtained when adopting Cr deposited to be 100nm thick with continuous tilting motion of the master substrate during the deposition process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.4
• /
• pp.407-411
• /
• 2024

In this study, we fabricated single grain YBCO bulk superconductors with control of the distance between the seed and the upper surface of the YBCO compacts. The magnetic levitation force of the YBa₂Cu₃O₇ superconducting bulk, which corresponds to the energy amount of the superconducting bulk, was measured to be 32.634 N at the center of the bulk where the seed was placed. Under field cooling conditions, a capture magnetic force of 2.17 kG was observed at the center of the bulk. The trapped magnetic force curve corresponding to the stability of the superconducting bulk means that the superconducting specimens were well grown in the form of single grains.

• Korean Journal of Agricultural Science
• /
• v.44 no.2
• /
• pp.188-195
• /
• 2017

Biotech crops can only be commercialized after they receive safety approvals, which require thorough risk assessments of their release to the environment. Environmental release experiments are indispensable for environmental risk assessments, and each country has been preparing its own regulations for the safety management of experiments on the environmental release of biotech crops in confined fields. In this study, we compared and analyzed the safety management regulations of the environmental release of biotech crops in Korea, USA, Japan, European Union, and China. Each country had safety management regulations for the environmental release of biotech crops, and these regulations were generally not much different from the Korean regulations. However, there was a difference amongst the USA, Japan, and China in regulations for isolation distances to prevent gene diffusion through pollen-flow during environmental release experiments of biotech crops. In order to establish the isolation distance regulation suitable for the Korean environment, relevant data were collected and presented. For setting the isolation distance for environment release of biotech crops, it is suggested to refer to the isolation distance information provided in the Guidance of Seed Management in Korea. The results of this study are expected to help establish the safety management of biotech crops in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.85-90
• /
• 2015

The objective of this study was comparison of seed yields according to different seeding rates, seeding time and application of chemical fertilizations in Yanji region of China. The experiment was conducted on commercial farmland at Yanji region in 2013. All the experimental fields were designed following randomized block design with 3 replicates. The plant spacing was applied as $65{\times}1cm$ distance. To check the effect of seeding rate, two different seeding rate, 0.2 kg/0.1ha and 0.5 kg/0.1ha were applied. The higher seed yield was observed in low seeding rate (0.2 kg/0.1ha). The application of fertilizer (mixture of N and P) showed different results following different experimental fields. However, there were little positive effects following fertilizer application into commercial farmland. When we compare seed yields between two different seeding dates, $4^{th}$ May and $29^{th}$ May, the earlier seeding date ($4^{th}$ May) showed higher seed yields. In considering these results, low seeding rate and early seeding time is important for getting high camelina seed yields.

• Journal of Bio-Environment Control
• /
• v.18 no.1
• /
• pp.74-80
• /
• 2009

This study was conducted to evaluate cultivation to save the production method cost of warm type garlic. The optimum system for producing excellent seed bulbs by using bulbils of garlic has been required. The bigger size bulbils induced fast growth and lower rate of non-cloved bulbs. The ratio of non-cloved bulbs was the highest in the 0.1 g bulbils sowing of 'Namdo' and was low in the big size bulbils sowing. The bulbil growth rate of 'Deaseo' was much faster than that of 'Namdo', but most of 'Deaseo' bulbils showed low rate of non-cloved bulbs and small size scales in bulbs. The higher productivities of "Namdo" bulbils appeared at the September 11th sowing time, but 'Deaseo' bulbils produced small size non-cloved bulbs and got the very low ratio of non-cloved bulb production in all of the treatment, sowing that Jeju Island could not produce the non-cloved bulbs with 'Deaseo' garlic bulbuls. The growth rate such as leave number, leave length, bulb and clove size in the sowing distance of big size bulbils increased as the sowing distance was wider, but the rate of non-cloved bulbils decreased regardless of treatment. More than 3 g clove in the $10{\times}15cm$ distance of bulbs was produced resulted in sowing clove production potentials by using big size bulbil.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4A
• /
• pp.291-300
• /
• 2002

In this paper, a way of constituting optimized S box and G function was suggested in the block cipher whose structure is similar to SEED, which is KOREA standard of 128-bit block cipher. S box can be formed with nonlinear function and an affine transform. Nonlinear function must be strong with differential attack and linear attack, and it consists of an inverse number over GF(2$\^$8/) which has neither a fixed point, whose input and output are the same except 0 and 1, nor an opposite flexed number, whose output is one's complement of the input. Affine transform can be constituted so that the input/output correlation can be the lowest and there can be no fixed point or opposite fixed point. G function undergoes diffusive linear transform with 4 S-box outputs using the matrix of 4$\times$4 over GF(2$\^$8/). G function can be constituted so that MDS(Maximum Distance Separable) code can be formed, SAC(Strict Avalanche Criterion) can be met, there can be no weak input, where a fried point, an opposite fried point, and output can be two's complement of input, and the construction of hardware can be made easy. The S box and G function suggested in this paper can be used as a constituent of the block cipher with high security, in that they are strong with differential attack and linear attack with no weak input and they are excellent at diffusion.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.723-730
• /
• 1995

Effects of leaf and pod removal on changes in dry weight and protein content of soybean [Glycine max (L.) Merr.] cultivar 'Hwangkeumkong' were measured at the research farm of Korea University in 1992. The upper 40% and lower 60% of leaves and pods were subjected to treatments at the growth stage of beginning pod(R3). Leaf dry weight of lower part was increased by upper leaf-lower pod removal, but seed dry weight of upper part was decreased. The upper leaf-lower pod removal also increased stem dry weight and decreased upper pod dry weight. Protein content was higher in lower leaves than upper leaves. Seed protein contents were decreased both upper leaf-lower pod removal and lower leaf-upper pod removal treatments. The upper leaf-lower pod removal showed the highest leaf and the lowest seed protein quantities among the five treatments. These results indicated that protein sources were moved from lower to upper parts but weak in remobilization from leaves for the long distance translocation during the reproductive growth period of soybean plants.an plants.

• Journal of Climate Change Research
• /
• v.6 no.3
• /
• pp.243-248
• /
• 2015

This study was conducted to predict the changes of potential distribution for invasive alien plant, Conyza bonariensis in Korea. C. bonariensis was found in southern Korea (Jeju, south coast, southwest coast). The habitats of C. bonariensis were roadside, bare ground, farm area, and pasture, where the interference by human was severe. Due to the seed characteristics of Compositae, C. bonariensis take long scattering distance and it will easily spread by movement of wind, vehicles and people. C. canadensis in same Conyza genus has already spread on a national scale and it is difficult to manage. We used maximum entropy modeling (MaxEnt) for analyzing the environmental influences on C. bonariensis distribution and projecting on two different RCP scenarios, RCP 4.5 and RCP 8.5. The results of our study indicated annual mean temperature, elevation and temperature seasonality had higher contribution for C. bonariensis potential distribution. Area under curve (AUC) values of the model was 0.9. Under future climate scenario, the constructed model predicted that potential distribution of C. bonariensis will be increased by 338% on RCP 4.5 and 769% on RCP 8.5 in 2100s.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2010-2014
• /
• 2005

Object detection and parameter estimation in point cloud data is a relevant subject to robotics, reverse engineering, computer vision, and sport mechanics. In this paper a software is presented for fully-automatic object detection and parameter estimation in unordered, incomplete and error-contaminated point cloud with a large number of data points. The software consists of three algorithmic modules each for object identification, point segmentation, and model fitting. The newly developed algorithms for orthogonal distance fitting (ODF) play a fundamental role in each of the three modules. The ODF algorithms estimate the model parameters by minimizing the square sum of the shortest distances between the model feature and the measurement points. Curvature analysis of the local quadric surfaces fitted to small patches of point cloud provides the necessary seed information for automatic model selection, point segmentation, and model fitting. The performance of the software on a variety of point cloud data will be demonstrated live.

• The Korean Journal of Ecology
• /
• v.28 no.5
• /
• pp.271-279
• /
• 2005

Soil seed banks at ecological preservation areas in Seoul, Jinkwannae-dong, Bangi-dong and Bam-sum, were studied by seedling emergence method from May to October 2004. Total number of species and individuals in seed banks were 42 and 5,190 at Jinkwannae-dong, 39 and 2,290 at Bangi-dong, and 39 and 1,047 at Bamsum. Salix koreensis community at Jinkwannae-dong has the highest number of seedlings among all sites. The most abundant species were Lindernia procumbens in Jinkwannae-dong and Bam-sum and Typha spp. in Bangi-dong. The dominant species of seed banks were different from that of plant communities such as Phragmites communis community, Salix koreensis community, Persicaria thunbergii community, Phragmites japonica community, and Populus tomentiglandulosa community. However the dominant species of seed banks in Typha community was Typha spp. Total 63 species emerged in either the wet or submerged conditions. Fifty six species appeared in the wet condition and 25 in the submerged condition. Eighteen species appeared in both conditions. Numbers of species and individuals were much less in the submerged condition than in the wet condition but free-floating hydrophytes including Rorippa islandica and floating-leaved hydrophytes including Monochoria vaginalis appeared only in the submerged condition. In the investigation of soil seed bank by distance from water edge (Bamsum), water side 3 ($300\sim350m$ from water) edge, where water level is fluctuating frequently, has the highest number of seedlings.