• 제목/요약/키워드: scan pattern

검색결과 395건 처리시간 0.034초

초음파-파면해석에 의한 대차 프레임의 건전성 평가 (Integrity evaluations of bogie frame using ultrasonic-fractography analysis)

  • 윤인식;권성태;정우현;박덕신;김경국
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2000년도 추계학술대회 논문집
    • /
    • pp.461-467
    • /
    • 2000
  • This study proposes the integrity evaluation of bogie frame using ultrasonic waves-fractography analysis. Analysis objectives in this study are to investigate fracture planes of damaged zone by the A-scan method. The surface condition of fracture plane shows degree of degradation by stress concentration. The detection of the natural defects in bogie frame is performed using the characteristics of echodynamic pattern in ultrasonic signal. Results of ultrasonic testing agree fairly well with those of actual fracture plane. In quantitative fractography analysis, microstructures of actual fracture plane turned out to be intergranular and transgranular fracture, Proposed ultrasonic-fractography analysis in this study can be used for the integrity evaluation of the bogie frame

  • PDF

초음파 이미지를 이용한 CFRP 복합적층판의 적층결함 평가 (On Evaluation of Stacking Fault in CERP Composite Plates of Using Ultrasonic Images)

  • 임광희;나승우;심재기;양인영
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2003년도 춘계학술발표대회 논문집
    • /
    • pp.121-124
    • /
    • 2003
  • This paper shows shear wave behavior of CFRP(carton fiber reinforced plastics) composite laminates as a polar grid form to evaluate vibration pattern of ultrasonic transducers, which gives measured modelling fundamental contents of nondestructive evaluation. This modelling decomposes the transmission of a linearly polarized wave into orthogonal components through each ply of a laminate. It is found that a high probability shows between the model and measurement system in characterizing lay up of CFRP composite laminates. Also evaluating quantitatively the defects in CFRP laminates who found to be possible of normalized frequency obtained from 2D-FFT technique based on C-scan method. Thus, the technique is proven to be one of the useful means to evaluate any internal defect in CFRP composite laminates.

  • PDF

Domain Wall Motions in a Near-Morphotropic PZT during a Stepwise Poling Observed by Piezoresponse Force Microscopy

  • Kim, Kwanlae
    • 한국재료학회지
    • /
    • 제27권9호
    • /
    • pp.484-488
    • /
    • 2017
  • In the present study, domain evolution processes of a near-morphotropic PZT ceramic during poling was studied using vertical piezoresponse force microscopy (PFM). To perform macroscopic poling in bulk polycrystalline PZT, poling was carried out in a stepwise fashion, and PFM scan was performed after unloading the electric field. To identify the crystallographic orientation and planes for the observed non-$180^{\circ}$ domain walls in the PFM images, compatibility theory and electron backscatter diffraction (EBSD) were used in conjunction with PFM. Accurate registration between PFM and the EBSD image quality map was carried out by mapping several grains on the sample surface. A herringbone-like domain pattern consisting of two sets of lamellae was observed; this structure evolved into a single set of lamellae during the stepwise poling process. The mechanism underlying the observed domain evolution process was interpreted as showing that the growth of lamellae is determined by the potential energy associated with polarization and an externally applied electric field.

로컬영역의 정합기법 및 MCTF를 이용한 디지털 홀로그램 부호화 기술 (Digital Hologram Coding Technique using Block Matching of Localized Region and MCTF)

  • 서영호;최현준;김동욱
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.415-416
    • /
    • 2006
  • In this paper, we proposed a new coding technique of digital hologram video using 3D scanning method and video compression technique. The proposed coding consists of capturing a digital hologram to separate into RGB color space components, localization by segmenting the fringe pattern, frequency transform using $M{\tiems}N$ (segment size) 2D DCT (2 Dimensional Discrete Cosine Transform) for extracting redundancy, 3D scan of segment to form a video sequence, motion compensated temporal filtering (MCTF) and modified video coding which uses H.264/AVC.

  • PDF

A Case of Venlafaxine-Induced Interstitial Lung Disease

  • Oh, Serim;Cha, Seung-Ick;Kim, Hyera;Kim, Minjung;Choi, Sun Ha;Seo, Hyewon;Park, Tae-In
    • Tuberculosis and Respiratory Diseases
    • /
    • 제77권2호
    • /
    • pp.81-84
    • /
    • 2014
  • A patient treated with venlafaxine for major depression developed an interstitial lung disease (ILD) with the characteristic clinical, radiological and pathological features of chronic hypersensitivity pneumonitis. A high resolution computed tomography scan demonstrated ground glass opacity, mosaic perfusion with air-trapping and traction bronchiectasis in both lungs. The pathological findings were consistent with a nonspecific interstitial pneumonia pattern. Clinical and radiological improvements were noted after the discontinuation of venlafaxine and the administration of a corticosteroid. This report provides further evidence that the anti-depressant venlafaxine can cause ILD.

초음파 파면해석에 의한 대차 프레임의 건전성 평가 (Integrity Evaluation of Bogie Frame by Ultrasonic Fractography Analysis)

  • 윤인식;권성태;선종성;명노종;정우현;손태순;김경국;김순철
    • 한국철도학회논문집
    • /
    • 제3권2호
    • /
    • pp.77-83
    • /
    • 2000
  • This study proposes the integrity evaluation of the bogie frame using ultrasonic fractography analysis. Analysis objectives in this study are to investigate fracture planes of damaged zone by the A-scan method. The surface condition of fracture planes shows degree of degradation by the stress concentration. The detection of the natural defects in the bogie frame is performed using the characteristics of echodynamic pattern in ultrasonic signal. Results of ultrasonic testing agree fairly well with those of actual fracture plane. In quantitative fractography analysis, microstructures of actual fracture plane turned out to be intergranular and transgranular fracture. Proposed ultrasonic fractography analysis in this study can be used for the integrity evaluation of the bogie frame.

  • PDF

히드록시프로필 키틴의 합성과 액정형성 (Synthesis of Hydroxypropyl Chitin and Its Liquid Crystalline Character)

  • 김선정;이영무
    • 공업화학
    • /
    • 제3권3호
    • /
    • pp.516-521
    • /
    • 1992
  • 키틴에 산화프로필렌을 반응시켜 키틴의 수산기에 히드록시프로필기가 치환된 히드록시프로필 키틴(HPCH)을 합성하였다. 여러가지 유기 용매중에서 키틴과 그 유도체의 용해성 시험에서 HPCH가 키틴보다 용해성이 향상되었으며 포름산에서 가장 좋은 용해성을 나타내었다. 포름산을 용매로 HPCH용액을 제조하여 농도를 변화시키면서 편광현미경으로 관찰한 결과 30 wt% 이상의 농도에서 지문형태의 복굴절 현상이 나타났으며, 열분석기(DSC)의 분석에서 열적 특성피크는 관찰되지 않아서 HPCH는 콜레스테릭 구조를 갖는 유방성 액정을 확인할 수 있었다.

  • PDF

픽셀 객체 추적을 통한 이동성 및 면적 변화 특성을 이용한 자동 폐결절 검출 (Automatic pulmonary nodule detection using mobility characteristics and area pattern via pixel object tracking)

  • 고훈;이우찬;이진석
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2015년도 추계학술발표대회
    • /
    • pp.1378-1380
    • /
    • 2015
  • 본 논문은 흉부 CT 영상을 활용하여 폐결절을 자동으로 검출하는 알고리즘에 관한 연구내용을 담고 있다. 폐 결절 자동 검출을 위해 폐 CT 영상 내에 있는 객체를 검출하고, 검출된 객체의 특징들 중, 이동성 및 기하학적 특징을 가지고 폐혈관과 폐결절을 구분하였다. 실험한 영상은 폐결절이 있는 26명의 원광대학교 병원 환자의 흉부 CT 영상을 사용하였으며, 그 결과 96.15%의 정확도와 3.54 False Positves / Scan이 발생하였다.

The Crystal and Molecular Structure of Phlorizin Dihydrate

  • Shin, Whan-Chul
    • Bulletin of the Korean Chemical Society
    • /
    • 제6권1호
    • /
    • pp.7-11
    • /
    • 1985
  • The crystal structure of phlorizin, a ${\beta}$ -D-glucopyranoside of a flavonoid dihydrochalcone phloretin, has been determined by single crystal diffraction methods using diffractometer data obtained by the ${\omega}-2{\theta}$ scan technique with Cu $K{\alpha}$ radiation from a crystal with space group symmetry $P2_12_12_1$ and unit cell parameters a = 4.9094 (2), b = 19.109 (1), c = 23.275 (4) $\AA$. The structure was solved by direct methods and refined by full-matrix least-squares to a final R = 0.047 for the 1697 observed reflections. The dihydrochalcone moiety is flat and fully extended. The glucose ring has the $^4C_1$ chair conformation and the conformation of the primary alcohol group is gauche-gauche. The crystal packing is dominated by an extensive hydrogen bonding pattern. There are one strong and two weak intramolecular hydrogen bonds in the phlorizin molecule.

비전기반 타이어 몰드 불량 검사 및 검사서 출력 시스템 (Vision Based Tire Mold Defect Inspection and Printing System)

  • Lee, Si-Woong;Kang, Hyun-Soo
    • 한국정보통신학회논문지
    • /
    • 제25권6호
    • /
    • pp.849-852
    • /
    • 2021
  • This paper presents a vision based tire mold inspection system where mold defects are inspected and the sizes of specific parts of the mold are measured. There are a lot of challenging issues as letters and pictures of intaglio are engraved on a bright surface of the tire mold. To solve the issues, we carefully selected a line-scan camera and a line light. In addition, we used PLC to control the mechanical parts. The developed system provides inspection of misspelled and deformed letters as well as a variety of the functions such as size measurement of engraved regions and inspection report file creation.