• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.1
• /
• pp.116-126
• /
• 1998

This study was conducted to examine the effect of difference in materials of aerobic wear on both human body's physiological reactions and subjective wearing sensation by comparing and analysing not only cotton sparidex A, B and C but nylon spandex D, E and F used as actually wearing materials. The rectal temperature of type A and I remained at high degree, the type C was higher from after high-speed running but dropped sharply when taking a break finally. Both skin temperature and mean skin temperature dropped sharply due to sweat occurred during physical exercise, and then rose slowly when taking a break. Type A -D and B-I showed that the mean skin temperature remained at high degree when wearing a cotton spandex. Type C's temperature within its aerobic wear was lower than type F while its relative humidity was higher than type F. Wearing sensation showed a change similar to wearing, particularly, which was remarkable in type B-E. Also, it was shown that humidity sensation, tactile sensation and comfort sensation were good when wearing the cotton spandex.

• Fashion & Textile Research Journal
• /
• v.15 no.5
• /
• pp.815-824
• /
• 2013

This study divides female consumers according to eco-friendly attitudes and the purchase frequency of eco-clothing products; in addition, it analyzes the characteristics of each group in terms of LOHAS lifestyles, the attitudes for eco-clothing products, and satisfaction. Eco-clothing attitudes of female consumers were lower than eco-friendly attitudes. A total of 360 female consumers were divided into 4 group according to purchase frequency and the eco attitude, Type 1: survival (33.0%), Type 2: wellbeing (25.6%), Type 3: curious (15.0%), Type 4: LOHAS (26.4%); in addition, age, income, marit alstatus, occupation, LOHAS lifestyle and shopping places were differentiated by type. Type 1 (low eco attitude and low eco-clothing purchase) were composed of the youngest, college students, low income, low level of LOHAS lifestyles and low level of eco-clothing attitude. Type 2 (high eco attitude and low eco-clothing purchase) were interested in healthy eating & exercise among LOHAS lifestyles; in addition, Type 1 & 2 showed alow level of eco-clothing satisfaction. Type 3, low eco attitude and high eco-clothing purchase, were characterized with high expenditures on clothing relative to income as well as lower levels of family activities and leisure life than LOHAS Type 4. Type 4 (high eco attitude and high eco-clothing purchase) were the oldest group and mostly composed of married workers (the highest income) with the highest LOHAS lifestyles and the highest level of eco-clothing satisfaction.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.541-546
• /
• 2011

In this study, conjugate fibers were prepared from 1,4-cyclohexanedimethanol-modified polyethylene terephthalate (PET) resin using side by side conjugate spinning, sea-island type conjugate spinning, and split type conjugate spinning methods, and the properties of the conjugate fibers were investigated via several techniques. When viscosity increased, the tenacity of side by side conjugate fibers was increased, whereas elongation decreased. The sea-island conjugate fibers showed lower weight loss and surface color difference (K/S) values relative to that of regular PET fibers at the same conditions. The SEM results indicate that orange type spilt readily produced at a temperature range of 120 - 140$^{\circ}C$.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.117-124
• /
• 1997

In this study, mechanical properties of type V cement concrete with different curing temperature were investigated. The tests for mechancial properties, i.e., compressive strength and modulus of elasticity, were carried out on two kinds of type V cement concrete mixes. concrete cylinders cured at 10, 23, 35 and 50℃ were tested at 1, 3, 7 and 8 days. The 'rate constant model' was used to described the combined effects of time and temperature on compressive strength development. Test results show that concrete subjected to high temperature at early age attains greater strength than concrete to low temperature but eventually attains lower later-age strength than that. With type V cement concrete, the linear and Arrhenius rate constant models both accurately describe the development of relative strength as afunction of the equivalent age.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1637-1639
• /
• 2004

In order to analyze the physical and chemical characteristics of the home production porcelain insulators by change of the alumina addition amount, 36000lbs ball socket type suspension insulators which were manufactured in 1989, 1995 and 2001 removed in transmission line and an experiment was performed. By the result, 8 [wt.%] alumina that influences the mechanical properties and arc resistance properties in case of insulators that were manufactured in 1989 was contained, and the relative density and the fracture toughness of insulators appeared by 94.2% and 1.4 [MPa $M^{1/2}$], respectively. However, 12 [wt.%] alumina was contained in case of insulators that were manufactured in 1995, and the relative density and the fracture toughness of insulators appeared preferably lower by 92% and 1.3 [MPa $M^{1/2}$], respectively. Amount of alumina was contained most by 17 [wt.%] in case of insulators that were manufactured in 2001. It was confirmed that the electrical and mechanical characteristics such as the relative density and the fracture toughness appeared excellently by 96% and 1.7 [MPa $m^{1/2}$], respectively.

• Earthquakes and Structures
• /
• v.16 no.4
• /
• pp.437-453
• /
• 2019

This study investigates a new optimal placement method for viscous dampers between structures in order to prevent pounding of adjacent structures with different dynamic characteristics under earthquake effects. A relative displacement spectrum is developed in two single degree of freedom system to reveal the critical period ratios for the most risky scenario of collision using El Centro earthquake record (NS). Three different types of viscous damper design, which are classical, stair and X-diagonal model, are considered to prevent pounding on two adjacent building models. The objective function is minimized under the upper and lower limits of the damping coefficient of the damper and a target modal damping ratio. A new algorithm including time history analyses and numerical optimization methods is proposed to find the optimal dampers placement. The proposed design method is tested on two 12-storey adjacent building models. The effects of the type of damper placement on structural models, the critical period ratios of adjacent structures, the permissible relative displacement limit, the mode behavior and the upper limit of damper are investigated in detail. The results of the analyzes show that the proposed method can be used as an effective means of finding the optimum amount and location of the dampers and eliminating the risk of pounding.

• Resources Recycling
• /
• v.11 no.3
• /
• pp.17-24
• /
• 2002

There has been an increasing demand over the years for steels with lower[s] content. For the purpose of improving the efficiency of desulphrization in the powder injection process of ladle, experimental studies were carried out by using cold model to optimize the lance configuration, gas flow rate, immersion depth of lance nozzle, position of lance nozzle relative to the ladle and the effect with slag, etc. As the results of this study, it was made clear that 2-hole nozzle lance (C, E type) placed in an asymmetric position gives the shortest mixing times.

• The Journal of Information Systems
• /
• v.28 no.4
• /
• pp.49-64
• /
• 2019

Purpose The purpose of this paper is to observe the relative priorities of importances among IT services for Smart tourism as well as the relative priorities of importances among ways for developing the IT Services. Design/methodology/approach AHP analysis model was designed with 3 layers in order to recognize the relative importances priorities of IT services and the ways developing the IT services in Smart tourism. The factors in the top layer consist of Pre-trip IT services, During-trip IT services and Post-trip IT services. The lower factors in second layer of the Pre-trip IT services consists of Tourism information search, Online reservation and Price comparison. The lower factors of the During-trip IT services consists of Context recognition, Virtual Reality and Drone Application. The lower factors of the Post-trip IT services consists of Interactive Sharing and Tagging. The factor of third layer, the ways of developing the IT services consist of Company leading, University leading and Industry-University Collaboration. The structural questionnaire based on the AHP analysis model was designed and used to survey experts in IT and tourism areas. The collected data by the question investigation was analyzed by AHP analysis technique. Findings The importance priority of During-trip IT service was highest among in the three type IT services of tourism life cycle. The importance priority of Price comparison service was highest among IT services for Pre-trip. The importance priority of the Context recognition service was highest among IT services for During-trip. The Interactive sharing service was highest among IT services for Post-trip. It would be confirmed for the IT service development ways of Company leading to be suitable for most of the It services, such as Tourism information search, Online reservation, Price comparison, Context recognition, Virtual reality, Drone application, Interactive sharing.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.1
• /
• pp.15-22
• /
• 1992

This study was performed to investigate the corrosion of metal fasteners in waterborne preservative-treated wood. Of all the metal tested, steel exhibited the greatest amount of corrosion across all preservatives and exposure conditions whereas stainless steel was totally inert. Galvanized steel corroded at a much lower rate compared to steel and the corrosion of brass was negligible. Among the preservatives, CCA-Type B was the most corrosive system tested. The sequence for the average corrosivity across all metals was: CCA-type B>CCA-Type C${\geq}$ACC${\geq}$CCA-Type A. Across all metals and retentions the salt formulations were more corrosive than the oxide and the corrosion was increased with the increse in the amount of preservative loadings. The amount of corrosion was also increased with the increase in exposure relative humidity (RH) across all metals and presevatives However, at the 60% RH exposure condition, the corrosion of metals was very negligible. Consequently, it can be concluded that across all metals oxide-type preservatives should be used to prevent the corrosion problem of metal fasteners in contact with treated wood and the use of steel nail preservative-treated wood should be avoided without distinction of end-use location, i.e., exterior or interior, and the use of stainless steel or at least brass nail in damp exterior condition was strongly recommended.

• Journal of Korean Society of Rural Planning
• /
• v.4 no.1
• /
• pp.75-85
• /
• 1998

This study, a sub-one of comprehensive research works titled under "Rural Resources Evaluation System", tried to propose a rational methodology for development of rating tabulation on evaluation items. Firstly, the database system for handling of original/processed data of each evaluation items was constructed, being mainly focussed on the possibilities of data acquisition and statistical treatment. The rating tabulation system developed in the study has the formalized evaluation classes as 2 or 5 for convenience/simplification of analysis works. For each evaluation item in lower step of the goal system, 5 types of rating technique were arranged, which were based on statistical analysis using mean and standard deviation values(Type I), its existence or not(Type II), relative significance of its holding volume(Type III), synthesized weighting scale of its quality and quantity(Type IV), and the others(Type V). And, standardized 4-steps procedure for rating tabulation was proposed. Finally, the rating tabulation system developed in the study was applied to each evaluation item of goal system, from which the numerically-valued ranking criteria was obtained.