Resources Recycling (자원리싸이클링)

The Korean Institute of Resources Recycling (한국자원리싸이클링학회)
권호 표지

The Mixing Characteristics of Melt during the Injection of Gas into a Ladle through an Immersed Lance

침적 Lance를 이용한 가스 injection시 ladle내 액체의 교반특성 연구

  • Published : 2002.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

There has been an increasing demand over the years for steels with lower[s] content. For the purpose of improving the efficiency of desulphrization in the powder injection process of ladle, experimental studies were carried out by using cold model to optimize the lance configuration, gas flow rate, immersion depth of lance nozzle, position of lance nozzle relative to the ladle and the effect with slag, etc. As the results of this study, it was made clear that 2-hole nozzle lance (C, E type) placed in an asymmetric position gives the shortest mixing times.

Keywords

References

  1. 拜田 等 :'川崎製鐵技報' p.1 (1982)
  2. 水木業夫等 : '製鐵硏究' 291, p.1 (1977)
  3. Oesters F.: Arch Zisenhutten. 44, p.727 (1973)
  4. 森一美等:議と鋼67, p.24 (1981)
  5. Carlsson G : Ironmking & Steelmaking 11(2), p.2 (1984)
  6. 松永成德等 : 鐵と鋼 69, p24 (1983)
  7. 佐野正道等 : 鐵と鋼 69, p24 (1983)
  8. 成田 等 : 鐵と鋼 S. 125 (1984)
  9. ?野島ニ等 : 鐵と鋼 S.957 (1983)
  10. 福次章 等 : 鐵と鋼 S.645 (1979)
  11. BirdR.D. : 'Transport Phenomena', p.3 (196O)
  12. 淺井機生 : '西山記念 100, 101回', p.65 (1981)
  13. SANO, M : Trans.ISIJ 23, p.169 (1983) https://doi.org/10.2355/isijinternational1966.23.169
  14. Engh, T.A : Scand. J. Met. 1, p.103 (1972)
  15. Szekely, J : 'Process MetalIUrg', p.5 (1970)
  16. Brimacome, J.K. : MEt. Trans. 5(3), p.763 (1973) https://doi.org/10.1007/BF02644674
  17. Basil, U.N. : Met. Trans, 4(8), p.1887 (1973) https://doi.org/10.1007/BF02665417
  18. Themelis, N.J : Trans. AIME 245(11), p.2425 (1969)
  19. 佐野正道 等 : 鐵と鋼 63, p.42 (1977)
  20. 山崎動 等 : 鐵と鋼 S.946 (1983)
  21. 金龍植 等 : '硏究記報' 7(2), p.197 (1985)
  22. 平岡正勝 : '移動 現象論', p.21 (1970)