• Journal of the Korea Institute of Building Construction
• /
• v.22 no.3
• /
• pp.251-258
• /
• 2022

In the cement industry, in order to reduce CO₂ emissions, technology for raw materials substitution and conversion, technology for improving process efficiency of utilizing low-carbon new heat sources, and technology for collecting and recycling process-generated CO₂ are being developed. In this study, we conducted a basic experiment to contribute to the development of CSC that can store CO₂ as carbonate minerals among process-generated CO₂ capture and recycling technologies. Three types of CSC clinker with different SiO₂/(CaO+SiO₂) molar ratios were prepared with the clinker raw material formulation, and the characteristics of the clinker were analyzed. As a result of analysis and observation of CSC clinker, wollastonite and rankinite were formed. In addition, as a result of the carbonation test of the CSC paste, it was confirmed that calcite was produced as a carbonation product. The lower the SiO₂/(CaO+SiO₂) molar ratio in the CSC clinker chemical composition, the lower the wollastonite production amount, and the higher the rankinite production amount. And the amount of calcite production increased with the progress of carbonation of the CSC paste specimen. It is judged that rankinite is more reactive in mineralizing CO₂ than wollastonite.

• Korean Journal of Crystallography
• /
• v.3 no.2
• /
• pp.111-119
• /
• 1992

Alexandrite crystals were grown by the Czochralski method. Relationships between or ystal quality and crystal growth factors such as pulling rate, rotation rate, purity of BeO po wders and evaporation loss compensation of BeO and Cr3+/Al3+substitution ratio were investigated. As a result, 1) high purity (more than 99.99p,) of BeO, as a raw material, is requisite condition for single crystal growth, 2) evaporation loss comp ensation is also requisite for high quality crystal growth. This compensation depends on pulling rate and Cr3+/Al3+ ratio. And 3) optimum pulling and rotation rate for alexandrite growth were 0.5∼1.0mm/hr and 20∼25rpm, respectively. Ale xandrite crystals were grown to (001) direction. Various types of defects were detected by the polarizing microscope and we discussed how to remove these defects. And room tempo rature absorption and fluorescence spectra were measured.

• Journal of Hydrogen and New Energy
• /
• v.24 no.5
• /
• pp.367-372
• /
• 2013

Hydrogen storage as a metal hydride is the most promising alternative because of its relatively large hydrogen storage capacities near room temperature. TiMn2-based C14 Laves phases alloys are one of the promising hydrogen storage materials with easy activation, good hydriding-dehydriding kinetics, high hydrogen storage capacity and relatively low cost. In this work, multi-component, hyper-stoichiometric $Ti_{0.85}Zr_{0.13}(Fe_x-V)_{0.56}Mn_{1.47}Ni_{0.05}$ C14 Laves phase alloys were prepared by a vacuum induction melting for a hydrogen storage tank. Since pure vanadium (V) is quite expensive, the substitution of the V element in these alloys has been tried and some interesting results were achieved by replacing V by commercial ferrovanadium (FeV) raw material. In addition, the melt-spinning process, which was applied to the manufacturing of some of these alloys, could make the plateau slopes much flatter, which resulted in the increase of reversible hydrogen storage capacity. The improvement of sloping properties of melt-spun $Ti_{0.85}Zr_{0.13}(Fe_x-V)_{0.56}Mn_{1.47}Ni_{0.05}$ alloys was mainly attributed to the homogeneity of chemical composition.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.2
• /
• pp.134-147
• /
• 2022

The objective of this study is to determine the effect of fiber direction arrangement and layer composition of hybrid bamboo laminate boards on the physical and mechanical properties. The raw material used was tali bamboo (Gigantochloa apus (J.A. & J.H. Schultes) Kurs) rope in the form of flat sheets (zephyr) and falcata veneer (Paraserianthes falcataria (L) Nielsen). Zephyr bamboo was arranged in three layers using water-based isocyanate polymer (WBPI) with a glue spread rate of 300 g/m². There were variations in the substitution of the core layer with falcata veneers (hybrid) as much as two layers and using a glue spread rate of 170 g/m². The laminated bamboo board was cold-pressed at a pressure of 22.2 kgf/cm² for 1 h, and the physical and mechanical properties were evaluated. The results showed that the arrangement of the fiber direction significantly affected the dimensional stability, modulus of rupture, modulus of elasticity, shear strength, and screw withdrawal strength. However, the composition of the layers had no significant effect on the physical and mechanical properties. The bonding quality of bamboo laminate boards with WBPI was considered to be quite good, as shown by the absence of delamination in all test samples. The bamboo hybrid laminate board can be an alternative based on the physical and mechanical properties that can meet laminated board standards.

• Journal of Animal Science and Technology
• /
• v.48 no.3
• /
• pp.435-442
• /
• 2006

Effects of surimi-like material (SLM) from pig heart on the quality of frankfurter sausage were investigated. The sausages were made by substituted addition of SLM at 5 and 10% levels in raw meats. Contents of moisture and fat in batter were not changed by addition of SLM, respectively, whereas protein content was significantly (P<0.05) decreased with SLM level increased. Although pH of frankfurter sausage was significantly (P<0.05) increased with SLM addition, percentage of cook yield was significantly (P<0.05) decreased. As increasing of addition levels of SLM, hardness and chewiness were decreased, but springiness was significantly (P<0.05) increased. Also, panel rated sausages of 10% SLM as having a higher tenderness and acceptability compared with control. These results suggested that a tender frankfurter sausage without any defects of flavor might be made with substitution of SLM from pig heart.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.440-448
• /
• 2023

Utilizing admixture, which is one of the raw material replacement method in the cement industry, is expected to be easily and quickly put to practical use as it is relatively more accessible than other methods. Among cement admixtures, limestone powder is reported to be able to improve cement performance through nucleation effects, chemical effects, and filler effects, so it is a material expected to be suitable as a cement admixture. Meanwhile, as high-quality limestone is depleted around the world, the use of limestone with clay or high magnesia (MgO) content is becoming increasingly inevitable. Therefore, in this study, we attempted to evaluate the suitability of limestone cement as a admixture by measuring the basic properties of limestone cement mixed with limestone of different qualities commonly used in Korea. As a result, the effect of alite reaction promotion was confirmed regardless of the chemical composition of the limestone binder. However, the dilution effect depending on the substitution amount was greater than the chemical composition. It is believed that normal-grade limestone can be used as a mixture as long as the limestone content in cement is within 15 % in this scope of study. In the future, we plan to evaluate the impact of the chemical composition of the limestone mixture through additional experiments depending on the chemical composition of cement.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.219-242
• /
• 2006

Quantitative analysis and provenance interpretation of the raw materials for the jade (amazonite) excavated from the Asan Sijeonri site were studied. Geology of the Sijeonri site composed mainly of Precambrian metasedimentary rocks and the alluvium ranges extensively. In the site, amazonite jade was excavated in the Bronze Age No. 4 circular-shaped resident site. The jade has a comma-shaped and shows light green color with so much cracks. The jade is silicate mineral of columnar habits that is shown white streak, and has fine cleavages with vitreous luster. As the analytical results, this jade was identified as a feldspar-group mineral gemologically called amazonite that is mineralogically microcline formed to intergrowth of albite and orthoclase. Internal textures of the amazonite present Na-end member of albite coexisting with K-end member of orthoclase that are replaced each other along the cleavages and twin planes with several ${\mu}m$ scales. Therefore, the amazonite is one mineral phase combined with albite and orthoclase by substitution of $Na_2O$ and $K_2O$, respectively. The Danyang are is an unique producing site of amazonite in South Korea, and Gongju Janggimyeon was known as microcline provenance to the utmost area from the Sijeonri site. In the marginal area of southern coast in Korean Peninsula, Bronze Age amazonite has been excavated in several sites, where original provenance of the raw amazonite is not identified. The Sijeonri site does not show any facilities of producing and processing traces for amazonite jade. Also, only one jade was collected in the Sijeonri site. Therefore, there is not possibility that the provenance of raw jade is the Sijeonri area. To explain original provenance of the amazonite jade, migration path, manufacturing process and archaeological interpretation are required.

• Journal of Dairy Science and Biotechnology
• /
• v.34 no.2
• /
• pp.137-144
• /
• 2016

The ultimate research goal of the current study was a development of hydrolyzed whey protein powder (7%-GNANA) manufactured with normal content of sialic acid, a marker compound, that is naturally occurring at 7% concentration in GMP obtained from the milk protein. GMP is a safe food, used worldwide in infant and baby foods, etc. The test substance was prepared using (7% sialic acid containing) GMP as a raw material, and then using alcalase, an enzyme approved as a food additive, after separation of sialic acid with 100% efficiency and 7%-GNANA (containing 7% sialic acid and protein; product name: HELICOBACTROL-7) provided by MEDINUTROL Inc. (Korea). Bacterial reverse mutation (Ames) test was conducted in accordance with GLP Guideline using the test substance specified above. To identify its mutagenic potential against microorganisms, histidine auxotrophic strains of Salmonella Typhimurium, TA98, TA100, TA1535, and TA1537, and tryptophan auxotrophic strain of Escherichia coli, WP2uvrA, were used. The bacterial reverse mutation (Ames) test was performed by dividing the test substances into five different concentration groups (0, 61.7, 185, 556, 1,670, $5,000{\mu}g/plate$). Results of this experiment did not reveal repetitive increase of colony generating values or positive criteria for reverse mutagenicity for any concentration of test substances in any of the five strains, regardless of the presence of a metabolic activation system, and no dose-dependency was identified. In conclusion, the safety of 7%-GNANA test substance was verified by bacterial reverse mutation test conducted before registration of 7%-GNANA as a food additive.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.2
• /
• pp.323-329
• /
• 1995

For the effective utilization of dark meat separated as by-product from skip-jack canning, the dark meat concentrate(DPC) was prepared by removal of extractable materials with ethanol from dried dark meat. Dark meat protein hydrolysate(DPH) was prepared by the hydrolysis of DPC with ${\alpha}-chymotrypsin$. ${\alpha}-Chymotrypsin$ hydrolysed DPC to the extend of 79% during 10hr. The solubility over a pH range 1~12 showed similar trend on the both of DPH and DPC. The highest solubility was 81% on the DPH and was 36% on the DPC at pH 3. The lowest solubility was 65% on the DPH and was 22% on the DPC at pH 7. The content of total free amino acid was higher in the DPC than in the DPH, but the content of total essential free amino acid was higher in the DPH. Especially, the contents of taurine in the DPC and DPH were much higher than those of other amino acids. The result of sensory evaluation on the fish sauce analogue showed good taste, color and odor at the supplemented level of 8g DPH per 100ml of raw solution of fish sauce analogue and didn't show signifcaint difference compared with market fish sauce(p<0.05). On the preparation of surimi gel, 2% substitution of DPH for the supplemented starch was the most appropriate level.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.4
• /
• pp.120-132
• /
• 2021

Although the development of high-Nickel is being actively carried out to solve the capacity limitation and the high price of raw cobalt due to the limitation of high voltage use of the existing LiCoO₂, the deterioration of the battery characteristics due to the decrease in structural stability and increase of the Ni content. It is an important cause of delaying commercialization. Therefore, in order to increase the high stability of the Ni-rich ternary cathod material LiNi_0.6Co_0.2Mn_0.2O₂, precursor Ni_0.6Co_0.2Mn_0.2-x(OH)₂/xTiO₂ was prepared using a nanosized TiO₂ suspension type source for uniform Ti substitution in the precursor. It was mixed with Li₂CO₃, and after heating, the cathode active material LiNi_0.6Co_0.2Mn_0.2-xTi_xO₂ was synthesized, and the physical properties according to the Ti content were compared. Through FE-SEM and EDS mapping analysis, it was confirmed that a positive electrode active material having a uniform particle size was prepared through Ti-substituted spherical precursor and Particle Size Analyzer and internal density and strength were increased, XRD structure analysis and ICP-MS quantitative analysis confirmed that the capacity was effectively maintained even when the Ti-substituted positive electrode active material was manufactured and charging and discharging were continued at high temperature and high voltage.