• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.850-853
• /
• 2009

통신선에 장애를 유발할 수 있는 전자유도 대책을 위해서 국가 기술기준에 의한 유도전압 한계치가 정해져 있고, 현장 유도 대책 상 이 제한치를 초과할 때에 필요한 것이므로 정부 고시의 기술 근거에 의해 유도전압을 계산하여 이에 대한 조치를 시행하고 있다. 전자유도 현상에 있어서 피유도원인 통신선간의 커플링 관계에 있어서 중간 차폐를 줄 수 있는 성분에 대한 계수치를 적용할 수 있다. 고시에 의하면 고속전철 시설 중 국내의 건설기반이 되는 고가의 교량구간에 의한 차폐 계수를 사용할 수 있고 그 수치가 제시되어 있는 바 이 수치에 대한 실증적 연구 소요에 의하여 교량구간이 아닌 노반 구간과 교량 구간의 경계점에서 비교 측정을 수행하였고 교량에 의한 차폐효과가 현재 고시에 주어진 수치에 근접함을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1083-1090
• /
• 2009

In 18GHz using unified data transmission in a subway and railway, Influence of the multipath fading is big and an arrival range of the micro wave takes the influence greatly according to the transmit angle and receive angle because it not diffracted. This thesis analyzed microwave property underground tunnel and ground railway at unified data transmission in subway and railway. Antenna gain of directional antenna many used unified transmission in an subway and railway, is used 15dBi and 10dBi in simulation. Transmitter's property is compared underground tunnel to ground railway about curved railway of R=100, R=200, R=400. Specification of transmitter is used sample unified transmission system in subway and railway of KRRI(korea railroad research Institute). Transmitter's power is 20dBm and Reciever's sensitivity is -90dBm. According to result of simulation.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.1
• /
• pp.85-92
• /
• 2015

Universal Design involves designing products and spaces so that they can be used by the widest range of people possible. Universal Design evolved from Accessible Design, a design process that addresses the needs of people with disabilities. This paper introduces the universal design concept through analysis of causes of railway accident within the urban railway station. Railway accident analysis was performed by the internal facilities. We analyzed the standard of accident type, accident cause and accident subject such as elevator, escalator, stairs etc.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1416-1423
• /
• 2007

Dynamic instability of the railway bridge can cause track irregularities and be directly connected with unstable passenger comfort and derailment of the train. Europe and Japan had studied on this problem for a long time since 1960's, Results of those studies are reflected in recent Eurocode and the bridge design code of Japanese railway bridges. However, even though some traffic safety requirements were applied in Kyoung-bu highspeed railway by French engineers, we experienced many difficulties from insufficient information of criteria background and application procedures. In this paper, a investigation of recent traffic safety requirements of Europe and Japan for railway bridges will be introduced and application procedures for the estimation of dynamic performance will be proposed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.476-477
• /
• 2007

The development of real-time monitoring technology provides reliable, timely information of railway maintenance and play a important role in determining the conditions of railway electrification system. Image motoring and wireless communication systems are currently used as remote transducer for real-time monitering. In this paper, we describe a real-time monitoring technology of railway electrification system based on the concept of high-voltage application, using the image processing and telemetry system methodology. the system and its performance for especially with regard to real-time monitering and railway electrification maintenance.

• Journal of Applied Reliability
• /
• v.17 no.4
• /
• pp.316-324
• /
• 2017

Purpose: The purpose of this study is to determine the replacement cycle applied age replacement policy by reliability analysis based on railway vehicle contactor's failure history data. Method: We performed reliability analysis based on railway vehicle contactor's failure history data. We found a suitable distribution by goodness of fit test and predicted the reliability through estimation of scale & shape parameter. Considering cost information we determined the replacement cycle that minimize the opportunity cost. Result: Suitable distribution was the Weibull and scale parameter & shape parameter are estimated by reliability analysis. The replacement cycle was predicted and MTTF, $B_6$ percentile life were suggested additionally. Conclusion: We confirmed that failure rate type of railway vehicle contactor is degradation model having a time dependent characteristic and examined the replacement cycle in our country's operating environment. We expect that this study result contribute to railway operation agency for maintenance policy decision.

• Journal of odor and indoor environment
• /
• v.17 no.4
• /
• pp.303-314
• /
• 2018

The urban railway system is a convenient public transportation system, as it carries many people without increasing traffic congestion. However, air quality in urban railway environments is worse than ambient air quality due to the internal location of the source of air pollutants and the isolated space. In this paper, characteristics of particulate matter (PM) pollution in urban railway environments are described from the perspective of diurnal variation, chemical composition and source apportionment of PM. PM concentrations in concourse, platform, passenger cabin, and tunnel are summarized through an analysis of 34 journal articles published in Korea and overseas. This information will be helpful in developing effective policies to reduce PM pollution in urban railway environments.

• Electronics and Telecommunications Trends
• /
• v.36 no.4
• /
• pp.23-33
• /
• 2021

Wireless communication for train control is an active research field. The World Railway Federation in Europe developed GSM-R, which integrates the GSM-based voice call standard and train control signals. To provide advanced railway services, the LTE-R wireless communication system was developed in Korea for passenger services and wireless image information required by the railroad industry. Recently, direct communication technology for autonomous train driving has been studied to decrease the driving interval, and research is being conducted on a hyperloop train control system that runs at a maximum speed of 1,220km/h in a subvacuum environment of 0.001 atmosphere. In this paper, we summarize the trends in wireless communication technologies used for GSM-R/LTE-R railway systems. For future wireless communication in railway systems, we discuss autonomous train driving and the hyperloop railway control system, define wireless communication technology, and discuss trends in domestic and foreign technologies.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.214-216
• /
• 2007

With the arrival of ubiquitous networking environment, it has been needed to build up the u-infrastructure for railway, and so the realization of ubiquitous rail system could be preferred. We have studied the direction for development of technology for realizing u-rail system through the analysis of the condition and demand on railway system, and investigated the requirements, level of technology and applicability of information infrastructure for realizing u-Rail. And also analyzed the technology based on railway information to determine the role of existing information system and connect it, which is adequate for u-Rail and the project selection.

• Journal of KIBIM
• /
• v.8 no.1
• /
• pp.1-14
• /
• 2018

Domestic and foreign software components are rapidly developing continuously. However, the government's plan to activate BIM remains relatively sluggish. In particular, BIM based information management systems have been developed to enable the development of degraded railway industries in infrastructure BIM based areas. For this purpose, we analyzed domestic and oversea policies and guidelines. We conducted a survey on the personnel of the railroad corporation. Based on the survey result, the elements applicable to BIM were reflected in the system.