• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.109-116
• /
• 1999

This study is to make clear for the characteristics of radial drainage consolidation/permeability At the result of the radial drainage consolidation / permeability test, the permeability of outflow drainage condition is higher than Inflow drainage condition and the time for the end of consolidation, outflow drainage condition is shorter than inflow drainage condition. So drainage area ratio test and control of hydraulic gradient test are carry out to analysis this result. Finally, compared with the characteristics on the condition of inflow and outflow permeability and consolidation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.685-692
• /
• 2000

Vertical drain used improvement soft clay is made of not only decreasing construction time but also increasing the ground strength during some decades. As, it is applied to improvement soft clay with vertical drain, it is designed by the result that is caused by oedemeter test ignored anisotropic of the ground related to consolidation conditions. When we are expected consolidation conditions, the most important factors is soil of compaction and water permeability. Above all, anisotropic of the ground permeability show the results which differ between vertical and radial drainage. Recently, We study for radial consolidation coefficient and permeability coefficient that utilized Rowe Cell Consolidation and permeability tester but, it dont use well because of not only a supply lack also difficulty of test. The paper experimented with searching anisotropic of the ground so there are Rowe Cell test, standard consolidation tester and modified standard consolidation test that have pohang's soft clay ground. Therefore, we find anisotropic of the ground and a tester of easy use more than before. We made a comparison test result between the devised tester and Rowe Cell tester, Also, we learned average degree of consolidation for partial penetrating vertical drains. We were found relations as effective stress-void and effective stress-permeability coefficient through those tests.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.1-6
• /
• 2005

The anatomical structure of fusiform ray was examined by scanning electron microscopy (and microscopic images were analysed by image analyser) to explain the differences in radial fluid uptake between the extremes in the radial treatment data, i.e. between the selected trees of QCI (Queen Charlotte Islands in Rhondda, South Wales) and SO (South Oregon in Dalby, North-East England) planted in the UK. The ray structure of these two seed origins was examined microscopically and different patterns of ray composition were observed. The most important anatomical features influencing radial permeability were the nature of fusiform ray, and the condition of the resin canals, epithelial cells and intercellular spaces in particular.

• 대한토목학회논문집
• /
• 제28권1C호
• /
• pp.9-17
• /
• 2008

본 연구에서는 압밀 중에 위치별 간극수압의 측정을 통하여 시료 내 여러 위치에서 투수계수를 산정할 수 있는 이론해를 제시하였으며, 이를 바탕으로 간극비 및 체적압축계수를 산정할 수 있는 방법을 제안하였다. 또한 여러 위치에서 간극수압을 측정할 수 있는 방사내측배수가 가능한 대형압밀시험기를 제작하고 카올리나이트를 이용하여 압밀시험을 실시하였다. 시험결과로부터 압밀 중 투수계수, 간극비, 체적압축계수의 변화 및 시료 내 위치별 분포를 평가하였으며, 압밀완료 후 시료의 함수비 측정으로 평가된 값들과의 비교를 통하여 실험결과의 신뢰성을 검증하였다. 실험결과 투수계수, 체적압축계수, 간극비는 압밀 중 감소하며, 재하단계에 따라서도 감소함을 확인하였다. 또한 그 분포형태는 배수면 근처에서 가장 작고 배수거리에 따라 증가하며 비배수 경계면 근처에서는 오히려 약간 작은 것으로 나타났다.

• Korea-Australia Rheology Journal
• /
• 제18권4호
• /
• pp.217-224
• /
• 2006

Rapid flow advancement without void formation is essential in the liquid composite molding (LCM) such as resin transfer molding (RTM) and vacuum assisted resin transfer molding (VARTM). A highly permeable layer in multi-layered preform has an important role in improvement of the flow advancement. In this study, a multi-layered preform which consists of three layers is employed. Radial flow experiment is carried out for the multi-layered preform. A new analytic model for advancement of flow front is proposed and effective permeability is defined. The effective permeability for the multi-layered preform is obtained analytically and compared with experimental results. Compaction test is performed to determine the exact fiber volume traction of each layer in the multi-layered preform. Transverse permeability employed in modeling is measured experimentally unlike the previous studies. Accurate prediction of flow advancement is of great use for saving the processing time and enhancing product properties of the final part.

• 대한토목학회논문집
• /
• 제29권4C호
• /
• pp.137-144
• /
• 2009

본 연구에서는 대형압밀시험 장비를 이용하여 연직배수재 타설로 스미어가 발생된 지반을 모사하고 실험을 수행하였다. 스미어가 발생한 카올리나이트 모형지반에서 배수재로부터의 거리에 따라 시료를 채취하고 이를 이용하여 표준압밀시험을 실시하였으며, 이로부터 투수계수-간극비-유효응력의 3차원 거동을 분석하였다. 실험결과 스미어 발생으로 나타나는 위치별 투수계수 차이와 스미어와 무관하게 방사배수 압밀 중 나타나는 위치별 투수계수 차이는 모두 압밀진행에 따라 감소하며 정규 압밀영역에서 거의 사라진다. 또한 스미어로 인한 것보다 방사배수 압밀로 인한 위치별 투수계수 차이가 상대적으로 더 작은 영역에서 더 크게 나타났다.

• 한국가구학회지
• /
• 제18권2호
• /
• pp.111-119
• /
• 2007

An experiment was conducted to know the safranine impregnation distance from surface to inward using 6 different hardwood species. During impregnation, 3 parameters were applied-vacuum, pressure and soaking time. Only vacuum treatment did not increase the permeability of wood. Vacuum followed by pressure increased the penetration depth of safranine in radial, tangential and longitudinal direction. Longitudinal penetration was found easy to impregnate. Comparing with radial and tangential direction, radial penetration was found easy. There was a striking difference among sapwood and heartwood permeability. Safranine input depth was found highest in diffused porous wood rather than in ring porous wood. At increased vacuum and pressure, safranine penetration was found easy.

• 지질공학
• /
• 제28권1호
• /
• pp.1-9
• /
• 2018

We propose a borehole test technique to estimate permeability of rocks in borehole. The borehole tests are hydraulic injection tests such as leak-off test and hydraulic fracturing tests, which are originally conducted for stress or casing integrity assessment and not for permeability measurement. We use one-dimensional radial diffusion equation to interpret fluid injection test results in terms of permeability. We apply this technique to a leak-off test conducted at a depth of 700 m in a wellbore, where rock formation is mudstone. The estimated permeability is at an order of $10^{-16}m^2$, which is somewhat high but within the range reported for mudstones previously. Quantitative rick assessment suggests that an accurate measurement of open hole section length is important to improve reliability of results. More data may be needed to ensure the reliability of this technique. If validated, however, this technique can provide cost-effective estimation of in situ permeability without conducting independent permeability tests in borehole.

• 한국지반환경공학회 논문집
• /
• 제10권7호
• /
• pp.143-150
• /
• 2009

연약지반의 적정 압밀속도 및 압밀침하량 예측에 있어 유효응력, 투수계수, 압밀계수, 체적변화계수 등의 물질함수는 가장 중요한 요소로 작용한다. 본 연구에서는 수평배수 조건에서의 압밀 물질함수 산정을 위한 개량형 수평배수 압밀시험 장치를 고안하고, 이를 이용하여 고함수비 해성점토에 대한 압밀시험을 실시하였다. 시험에 이용된 시료는 상부 준설매립 지반과 하부 원지반점토로 구성된 남해안 산업단지 조성 현장에서 채취하였다. 기존의 표준압밀시험을 동시에 실시하였으며, 이 결과를 이용하여 배수조건별 간극비, 유효응력, 투수계수, 압밀계수, 체적변화계수 등을 분석하였다. 압밀 물질함수는 Stark(2005)이 제안한 소성지수 포함의 회귀분석 방정식 형태로 표현되었으며, 이를 통해 투수성에 대한 이방성 특성을 산정할 수 있었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.65-67
• /
• 2002

Resin Transfer Molding(RTM) is increasingly used for producing fiber reinforced polymer composites, the resin has to flow a long distance to impregnate the dry fibers. The measure for the resistance of the fiber preform to the resin flow is the permeability of the fiber preform. Permeability is a key issue in the design of molds and processes and in flow modeling. In this study, permeability measurement for braided preform is presented and compared with the permeability calculated numerically. Experimental techniques being used to measure the permeability are also discussed. Measurement is conducted in radial flow test under constant pressure.