• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1516-1519
• /
• 1997

With disseminationof Distributed Control Systems(DCS), the huge amounts of process operation data could have been available and led to figure out process behaviors better on the statistical basis. Until now, the statistical modeling technology has been susally applied to process monitoring and fault diagnosis. however, it has been also thought that these process information, extracted from statistical analysis, might serve a great opportunity for process operation improvements and process improvements. This paper proposed a general methodolgy for process operation improvements including data analysis, backing up the result of analysis based on the methodology, and the mapping physical physical phenomena to the Principal Components(PC) which is the most distinguished feature in the methodology form traditional statistical analyses. The application of the proposed methodology to the Balst Furnace(BF) process has been presented for details. The BF process is one of the complicated processes, due to the highly nonlinear and correlated behaviors, and so the analysis for the process based on the mathematical modeling has been very difficult. So the statisitical analysis has come forward as a alternative way for the useful analysis. Using the proposed methodology, we could interpret the complicated process, the BF, better than any other mathematical methods and find the direction for process operation improvement. The direction of process operationimprovement, in the BF case, is to increase the fludization and the permeability, while decreasing the effect of tapping operation. These guide directions, with those physical meanings, could save fuel cost and process operator's pressure for proper actions, the better set point changes, in addition to the assistance with the better knowledge of the process. Open to set point change, the BF has a variety of steady state modes. In usual almost chemical processes are under the same situation with the BF in the point of multimode steady states. The proposed methodology focused on the application to the multimode steady state process such as the BF, consequently can be applied to any chemical processes set point changing whether operator intervened or not.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.143-145
• /
• 2006

In this paper, single phase induction motor achieved improvement in efficiency by adapting the condition of Balanced operation and Quasi-balanced operation. Also, the process of efficiency improvement to find the optimum point of secondary resistance and running capacitor for working single phase induction motor is performed in order to attain the conclusion to put out the maximum efficiency at the rated operation point with meeting the starting torque.

• Journal of Korean Society for Quality Management
• /
• v.42 no.4
• /
• pp.633-646
• /
• 2014

Purpose: The conventional predicted MFTBF by military standard has a wide discrepancy to that of real-world operation, which leads to overstock and increase operation cost. This paper introduces a analyzing frame using operational reliability and cost data to overcome the discrepancy, and provides reliability improvement process employing the analyzing frame. Methods: This paper suggests Reliability-Cost Matrix (R-C Matrix) and Operational Reliability & Cost Index (ORCI) as a tool for reliability evaluation. Results: KOREIP(KAI's Operational Reliability Evaluation and Improvement Process) is developed employing Reliability-Cost Matrix and Operational Reliability & Cost Index. Conclusion: KOREIP provides a process and its activities based on Reliability-Cost Matrix frame. The process and activities leads reliability improvement of aerospace electronic equipments by means of categorizing and follow-up action based on the concept of frame.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.159-166
• /
• 2012

As enterprises, based on the forecast of the customer's demand and collaboration with the suppliers, establish the integrated system directing supply, production, and distribution for the increase of productivity, Thus, this study intends to find the most urgent and critical factors for the improvement of the information system by externalizing factors affecting the operation of information system, suggest the process to improve the relevant functions of information system, and design the process. As a result of the analysis of the previous studies on the improvement of the information system, many studies were conducted on the improvement of ERP and SCM, yet there was no study conducted targeting about APS (Advanced Planning & Scheduling). Thus, this study chose APS as the subject for the design of the process for the improvement for the information system.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.181-186
• /
• 2005

Because of advanced control technology, Shop floor control system of various kinds of equipment and machinery need a web based remote monitoring to control process efficiently. This paper presents the development of Operation Control System. Operation Control System(OCS) is based on intelligent web monitoring, so that OCS is improved the working condition for the line of heat treatment process and the product's quality. The developed OCS is consisted of Atmega128(MCU) based on embedded system, running the data logging of the line of heat treatment process. Web monitoring system is based on CS8900 ethernet controller and TCP/IP for remote monitoring responsibility between a server and clients and controlling the progress of entire system. The developed OCS is implemented on the line of heat treatment process and shows the improvement of environment condition, product's quality and efficiency of process line.

• Journal of Information Technology Services
• /
• v.6 no.3
• /
• pp.87-110
• /
• 2007

Recently, researches on IT Service Management (ITSM) for improving information system operation service and information system outsourcing cost estimation model are proliferating. This study suggests a new cost model of IT operation service and optimizing method based upon the characteristics of operation service as a long-term and continuous business service for both user's and service provider's point of view. This study explains the cost optimization model of IT operation service by improving service request management process, such as adequate reception and control, proper valuation, process management using project management methodology, effective organization and time management of service personnel. Especially in this study, service ability improvement effect and fixed operation cost reduction effect are defined to prove the proposed new cost model.

• International Journal of Quality Innovation
• /
• v.1 no.1
• /
• pp.89-96
• /
• 2000

Evolutionary operation (EVOP) is a continuous improvement system which explores a region of process operating conditions by deliberately creating some systematic changes to the process variable levels without jeopardizing the product. It is aimed at securing a satisfactory operating condition in full-scale manufacturing processes, which is generally different from that obtained in laboratory or pilot plant experiments. Information on how to improve the process is generated from a simple experimental design. Traditional EVOP procedures are established on the assumption that the variance of the response variable should be small and stable in the region of the process operation. However, it is often the case that process noises have an influence on the stability of the process. This process instability is due to many factors such as raw materials, ambient temperature, and equipment wear. Therefore, process variables should be optimized continuously not only to meet the target value but also to keep the variance of the response variables as low as possible. We propose a scheme to achieve robust process improvement. As a process performance measure, we adopted the mean square error (MSE) of the replicate response values on a specific operating condition, and used the Kruskal-Wallis test to identify significant differences between the process operating conditions.

• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.51-64
• /
• 1999

This study is on the focus of the cost-effective and time-effective in the BCTOC which commenced the On Dock Termainal System in 1998 for the first time in Korea. On this process of study two categories should be considered : (1) Improvement on Business Process (2) Improvement on Information Technology. With these two accesses a new future-oriented and prospective model could be put on our hand as follows. (1) Improvement on Business Process \circled1Consistency of container In-Out Operation \circled2Simplicity of Rate appraisal \circled3Unified operation on Billing and Request (2) Improvement on Information Technology \circled1Scale up the Information Application \circled2Constructing an one-spot simultaneous Information Holding System \circled3Combination of Internet and Integrated Database System.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.6
• /
• pp.149-157
• /
• 2006

This paper suggests the design and operation of value stream mapping(VSM) applied to project management, such as R&D, IT Investment. First this study represents design methodology of VSM process using SIPOC(Supplier, Input, Process, Output, Costumer). Second, this paper considers the identification and improvement plan about non-added value time for VSM using FPC(Flow Process Chart) and PERT/CPM. Last, this paper proposes VSM scheduling method using PERT/CPM and CCPM(Critical Chain Project Management)

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.126-137
• /
• 2020

This study collected and analyzed the fishing process of existing fishing boat and newly built fishing boat by using the video observation methods to understand the improvement of fishing operation efficiency and safety according to the scale change of coastal composite fishing boat. The fishing operation efficiency was calculated by analyzing the frequency of movement, the movement distance and the moving time per basket used in the fishing process to derive the improvement of the newly built fishing boat compared to the existing fishing boat. It was confirmed that the mean frequency of movements decreased to 13.9%, the average moving time decreased to 21.8%, the mean movement distance increased to 20.5% and the movement through the top of gunwale did not occur. Movement of frequency, increased and time according to the fishing operation were directly affected by the width of side passages and the presence or absence of walking obstruction such as bulwark stay, hatch coaming and fishing gears on deck. The results of this study are expected to be used as basic data for redesigning into a safe and efficient coastal composite fishing boat in the future.