• ETRI Journal
• /
• 제26권6호
• /
• pp.575-582
• /
• 2004

Fully-depleted silicon-on-insulator (FD-SOI) devices with a 15 nm SOI layer thickness and 60 nm gate lengths for analog applications have been investigated. The Si selective epitaxial growth (SEG) process was well optimized. Both the single- raised (SR) and double-raised (DR) source/drain (S/D) processes have been studied to reduce parasitic series resistance and improve device performance. For the DR S/D process, the saturation currents of both NMOS and PMOS are improved by 8 and 18%, respectively, compared with the SR S/D process. The self-heating effect is evaluated for both body contact and body floating SOI devices. The body contact transistor shows a reduced self-heating ratio, compared with the body floating transistor. The static noise margin of an SOI device with a $1.1\;{\mu}m^2$ 6T-SRAM cell is 190 mV, and the ring oscillator speed is improved by 25 % compared with bulk devices. The DR S/D process shows a higher open loop voltage gain than the SR S/D process. A 15 nm ultra-thin body (UTB) SOI device with a DR S/D process shows the same level of noise characteristics at both the body contact and body floating transistors. Also, we observed that noise characteristics of a 15 nm UTB SOI device are comparable to those of bulk Si devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.243-247
• /
• 1991

A roll eccentricity controller for a tandem cold rolling process is designed to attenuate the outlet thickness deviation due to roll eccentricity. In order to design the controller, the excess stability margin is maximized by solving a standard H.inf. optimization problem under the requirement that ensure disturbance rejection for a class of disturbance. Robust performance of the proposed controller is checked by a computer simulation.

• 한국전자파학회논문지
• /
• 제17권10호
• /
• pp.929-934
• /
• 2006

본 논문에서는 조건 안정 증폭기 설계를 위한 안정도 여유 분석 과정을 소개하고, 분포형 DC 차단 회로와 임피던스 정합 회로의 기능을 동시에 갖는 용량성 결합 정합 회로(CCMC)에 대해 기존 연구 결과보다 간단화된 설계 방법을 제안하였다. 조건 안정 마이크로파 증폭기 설계에 있어, 안정도 여유 분석에 근거한 접근법은 정량적으로 분석된 안정도 여유도에 근거하여 최대 이득 정합 조건을 결정하는데 유용하게 사용된다. 이러한 설계 방법은 조건 안정 상태에서 정합점 결정 시 반복적인 시행 착오를 줄일 수 있는 장점이 있다. 또한, 논문에서 제안하는 CCMC 설계 기법은 정합 회로의 구조를 정형화시킴으로써 기존 방법에 비해 합성 변수가 적은 장점이 있다. 제안 방법의 검증을 위해 박막 공정으로 제작된 24 GHz조건 안정 증폭기는 대역 평탄도 1 dB, 소신호 이득 10 dB로 설계 값과 잘 부합하는 결과를 보였다.

• 한국항만경제학회지
• /
• 제31권3호
• /
• pp.167-186
• /
• 2015

본 논문은 부산항 신항 배후단지에 위치한 항만물류창고 업체들에 대한 원가관리 실태를 점검하고, 향후 업체들을 지원할 수 있는 원가관리 모델을 제시하여 그 이론과 방법을 연구하였으며, 이를 동 지역의 사례업체인 K사에 직접 적용해 봄으로써 그 모델이 동 지역 업체들의 원가관리에 유용하다는 것을 규명하는데 그 목적을 두고 있다. 이에 따라 개별 원가계산 관리 모델로서 전통적 원가계산, 활동기준 원가계산(ABC), 시간동인 활동기준 원가계산(TDABC)의 3가지 모델을 제시하여 비교 연구하였으며, 최소이익 원가관리 모델로서는 공헌이익 분석 모델을 제시해서 연구하였다. 3가지 개별 원가계산 관리 모델 중에서는 TDABC가 가장 진일보되고 유용한 모델이라는 것을 규명할 수 있었으며, 공헌이익 분석 모델은 동 지역 업체들의 최소이익 관리 모델로서 적합하다는 것을 확인할 수 있었다.

• Journal of Periodontal and Implant Science
• /
• 제36권4호
• /
• pp.817-827
• /
• 2006

Purpose : This study was designed 1) to compare the perception of dental professionals and lay people with respect to minor variations in maxillary anterior tooth size and alignment and their relation to the surrounding soft tissues, and 2) to evaluate the normal tooth-gingiva topographical relationships in periodontally healthy young subjects, Materials and methods : Maxillary anterior teeth were intentionally diagrammed in varying degree of deviation with respect to one of three common anterior esthetic discrepancies including variations in crown length, shape of gingival margin, and length of interproximal contact, 17 images were generated to be preferentially selected by 2 groups consisting of dental professionals and lay people (total of 740). Smiling photographs of 120 dental students who had healthy periodontium were taken and the photographic images were analyzed to be classified as 17 kinds of altered image groups. Results : The results demonstrated noticeable difference between the varying levels of discrepancy. Both group preferred gingival margin of lateral incisor to be 0.5mm lower than that of central incisor. Lay people preferred the gingival margin shape that has 2/9 horizontal component of the crown width, while dental professionals preferred the gingival margin shape that has 1/9 horizontal component of the crown width. Lay people preferred longer length of the interproximal contact (two thirds of the crown length), whereas dental professionals preferred shorter length of the interproximal contact (half of the crown length). Photographic analysis of normal esthetic gingival topography revealed 2/9 horizontal component and short length of the interproximal contact which was of the hybrid nature of the preferences shared by lay people and dental professionals. Conclusion: The results of this study show that dental professionals and lay people demonstrated significant difference in their preference of dental esthetic components, which may then influence the decision making process by dental professionals with respect to designing the anterior esthetic gingival line.

• 정보처리학회논문지D
• /
• 제9D권1호
• /
• pp.167-172
• /
• 2002

최근 전자상거래에서 지능적인 소프트웨어 에이전트를 이용하여 사용자에게 더욱 능률적이고 효과적인 경매시스템으로 발전시키고자 하는 연구 및 개발이 주목을 받고 있다. 단순한 게시판 형식의 인터넷 경매 시스템에 인공지능 에이전트를 도입하여 해당 경매 상품에 대해 판매자에게 적정한 경매 시기와 초기값을 계산하고 예측하여 최대한의 이익을 남길 수 있도록 해주는 에이전트 시스템에 대한 연구가 본 논문의 목적이다. 상품을 인터넷 경매에 올리는 판매자가 판매하고자 하는 경매 상품에 대한 정보를 인터넷 경매 시스템의 에이전트에게 메일로 보내면 에이전트는 해당 상품과 유사한 상품에 대하여 필터링하여 이미 학습되고 있는 유사 상품에 대한 정보 즉, 데이터베이스에 저장되어 있는 경매상품에 대한 입찰 히스토리로부터 경매시간, 경매방법, 낙찰가격 등을 계산한다. 본 논문은 이를 통하여 해당 상품에 대하여 판매자가 어느 시기에 얼마의 초기 가격으로 경매를 시작하면 최대한의 이익을 남길 수 있는지에 대한 정보를 메일로 푸쉬하여 주는 시스템을 제안한다.

• Transactions on Electrical and Electronic Materials
• /
• 제3권4호
• /
• pp.5-9
• /
• 2002

Chemical mechanical polishing (CMP) has become the preferred planarization method for multilevel interconnect technology due to its ability to achieve a high degree of feature level planarity. Especially, to achieve the higher density and greater performance, shallow trench isolation (STI)-CMP process has been attracted attention for multilevel interconnection as an essential isolation technology. Also, it was possible to apply the direct STI-CMP process without reverse moat etch step using high selectivity slurry (HSS). In this work, we determined the process margin with optimized process conditions to apply HSS STI-CMP process. Then, we evaluated the reliability and reproducibility of STI-CMP process through the optimal process conditions. The wafer-to-wafer thickness variation and day-by-day reproducibility of STI-CMP process after repeatable tests were investigated. Our experimental results show, quite acceptable and reproducible CMP results with a wafer-to-wafer thickness variation within 400$\AA$.

• 한국기계가공학회지
• /
• 제19권3호
• /
• pp.57-62
• /
• 2020

Concrete pump cars are a type of construction equipment that continuously supplies concrete using hydraulic pressure. When manually casting concrete, there may be a problem in the final quality of the concrete due to differences in the degree of cure between the pre-poured and subsequent concretes. Concrete pump cars are the most efficient machines to supply concrete in the shortest time; however, it is difficult to calculate their margin of safety during operation. In this paper, we verified the structural safety of the concrete pump car using a static/dynamic analysis at various position angles. Next, these results were compared with experimental results; strains using strain gages were compared with the strains measured using FEM software to verify the static analysis. In addition, the maximum displacement during the pumping was measured and it was used for fatigue analysis to evaluate the dynamic structural safety.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권1호
• /
• pp.14-21
• /
• 2009

A digital differential transmitter based on CMOS inverter worked up to 2.8 Gbps at the supply voltage of 1 V with a $0.18{\mu}m$ CMOS process. By calibrating the output impedance of the transmitter, the impedance matching between the transmitter output and the transmission line is achieved. The PVT variations of pre-driver are compensated by the calibration of the rising-edge delay and falling-edge delay of the pre-driver outputs. The chip fabricated with a $0.18{\mu}m$ CMOS process, which uses the standard supply voltage of 1.8 V, gives the highest data rate of 4Gbps at the supply voltage of 1.2 V. The proposed calibration schemes improve the eye opening with the voltage margin by 200% and the timing margin by 30%, at 2.8 Gbps and 1 V.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.71-77
• /
• 2022

In times of war or emergencies, weapon systems, such as radars, must receive stable power. This can be achieved using improved onboard portable power systems made of steel containers. However, a breakdown can occur in the event of random vibration during transportation via a vehicle or train. Electrical-power shortages or restrictions pose a significant threat to security. In this study, Composite Wheeled Vehicle(CWV) data and rail cargo data with Acceleration Spectral Density(ASD), specified in MIL-STD-810H METHOD 514.8, were interpreted as input data of the three-axis random vibration method using ANSYS 19.2. Modal analysis was performed up to 500 Hz, and deformations in modes 1 to 117 were calculated to utilize all ASD data. The maximum equivalent stress in the three-axis direction was obtained using a random vibration analysis. Similarly, the margin of safety was calculated using the derived equivalent stress and material properties. Overall, the analysis verified that the portable container designed for the power supply system satisfied the required vibration demands.