• The KIPS Transactions:PartC
• /
• v.9C no.2
• /
• pp.283-292
• /
• 2002

This paper develops a scheme of resource management for guaranteeing QoS of realtime traffic in wireless mobile internet environments Mobile terminal has significant impact on the QoS originating mobility provided to a real-time application. The currently proposed MRSVP is not clear the boundary of resource reservation tregion and also can give rise to signal overhead to maintain sessions. To solve above problem, we propose the new reservation protocol, mobile cluster based H-MRSVP to combine MRSVP with moving cluster concept. In this paper, we analytically design our model for guaranteeing the QoS of realtime traffic and compare the three schemes: guard channel allocation schemes, DCA and our model. The performance measures are the probabilities of new call blocking, handoff dropping, resource utilization and service completion versus the system offered Erlang load. Consequently, Simulation indicate our model is more flexible than DCA in a view pint of channel utilization and gains the advantage over guard channel scheme with respects to the mobility.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.1
• /
• pp.88-95
• /
• 2011

In this paper, a new standby-mode control method for multiple output switching-mode power-supply is suggested, which uses the control signal of the feedback compensator of the inner loop in the linear voltage regulator located at the transformer secondary side, as the load current information. Conventional method has a problem that standby mode occurs depending only on the load condition of the main controller output, which makes the other secondary side output very inaccurate by burst mode operation. The proposed method detects all the load current information and operates in burst mode only when the all of them are light load condition. Minimum of the additional components are required for the implementation of the proposed method because the load information is obtained from the existing feedback circuit of the post-stage linear regulator. In this paper, the operating principles of the proposed standby-mode circuit are presented with an numerical analysis, and are verified by 25W hardware prototype implementation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.4
• /
• pp.281-285
• /
• 2020

Oxide semiconductor devices have become increasingly important because of their high mobility and good uniformity. The channel length of oxide semiconductor thin film transistors (TFTs) also shrinks as the display resolution increases. It is well known that reducing the channel length of a TFT is detrimental to the current saturation because of drain-induced barrier lowering, as well as the movement of the pinch-off point. In an organic light-emitting diode (OLED), the lack of current saturation in the driving TFT creates a major problem in the control of OLED current. To obtain improved current saturation in short channels, we fabricated indium gallium zinc oxide (IGZO) TFTs with single gate and double gate structures, and evaluated the electrical characteristics of both devices. For the double gate structure, we connected the bottom gate electrode to the source electrode, so that the electric potential of the bottom gate was fixed to that of the source. We denote the double gate structure with the bottom gate fixed at the source potential as the BGFP (bottom gate with fixed potential) structure. For the BGFP TFT, the current saturation, as determined by the output characteristics, is better than that of the conventional single gate TFT. This is because the change in the source side potential barrier by the drain field has been suppressed.

• Journal of the Korean Institute of Gas
• /
• v.3 no.3 s.8
• /
• pp.58-64
• /
• 1999

This paper has been analyzed for the stress behavior problems of the ring knot membrane unit using the finite element method about the pitch design of the membrane unit, which is one of the most important parameters in manufacturing of the membrane type LNG storage tanks. The FEM results have been compared those of the existing pitch design length. The safety problem of the ring knot membrane model, which is considered in this study, does not come out any more no matter what the pitch length is used in the extra large LNG storage tanks. But in the case of the membrane for LNG tankers, it is advantageous to design the pitch short because of fatigue strength caused by repeated loadings. Looking at the deformation behaviors of the membrane corrugation, the deformation of the hight in the y direction occurs $15{\~}50\%$ more than that of the width in the z direction. It shows also that the deformation of the membrane with $-162^{\circ}C$ cryogenic temperature is not so great compared with the deformation by hydrostatic pressure.

• Journal of the Korean Institute of Gas
• /
• v.24 no.1
• /
• pp.23-32
• /
• 2020

It is not easy to fully fuel high pressure(70 MPa) hydrogen in a hydrogen vehicle tank quickly. This is because the temperature inside the tank rises rapidly due to heat caused by the Joule-Thomson effect, etc. So fueling protocols such as SAE J2601 in the U.S. and JPEC-S 0003 in Japan appeared. However, there is a problem with these protocols that a number assumption are introduced and the content is too complex and limited in scope. This study was conducted to develop a new protocol based on complete real-time communication. In this study, the hydrogen fueling simulation program were used to examine how the pressure ramp rate affects the temperature and pressure rise in the tank and the fueling flow rate. The results confirmed that the first parameter to be considered in determining the pressure ramp rate is the temperature of the tank.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.73-83
• /
• 2020

The problem addressed in this study is that the reduction in process accidents is less than the reduction in industrial safety, and the losses from major accidents in the oil and gas processing industry have not decreased over the years. In particular, current risk approaches in storage tanks place more emphasis on improving the safety of the design than maintaining safe operation. The Bow-Tie method can be used properly to improve process safety. The Bow-Tie method can assess compliance by focusing on operational aspects, clearly highlighting all important safety barriers, and analyzing barrier effectiveness.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.401-406
• /
• 2015

The change of subthreshold swing for channel length of asymmetric double gate(DG) MOSFET has been analyzed. The subthreshold swing is the important factor to determine digital chracteristics of transistor and is degraded with reduction of channel. The subthreshold swing for channel length of the DGMOSFET developed to solve this problem is investigated for channel thickness, oxide thickness, top and bottom gate voltage and doping concentration. Especially the subthreshold swing for asymmetric DGMOSFET to be able to be fabricated with different top and bottom gate structure is investigated in detail for bottom gate voltage and bottom oxide thickness. To obtain the analytical subthreshold swing, the analytical potential distribution is derived from Possion's equation, and Gaussian distribution function is used as doping profile. As a result, subthreshold swing is sensitively changed according to top and bottom gate voltage, channel doping concentration and channel dimension.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.317-323
• /
• 2006

This paper deals with High Stacking System(HSS) development to develop a next generation port handling system for accommodating mega-sized container ships. It aims to develop the HSS that maximizes handling capacity within the limited space of the port. The system is expected to resolve the problem of yard space shortage as well as utilize innovative technology to ensure high-performance and automation at the terminal so as to enhance stevedoring productivity. The main objectives of this paper is suggesting the design concept drawing the HSS terminal and simulation analysis was undertaken taking into consideration performance of handling equipment, and port handling system Design concept drawing of the HSS terminal and will be used as base data for basic design and detailed design in actual operations of the terminal in the future. The HSS, to be applied to both conventional and new terminals, is expected to act as a catalyst for enhancing the value-added at ports.

• Journal of Korean Society of Rural Planning
• /
• v.4 no.2
• /
• pp.8-19
• /
• 1998

The problem of outdated and surplus facility-items in existing Rural Living Environment Renewal Program(RLERP) makes this study focus on restricting the range of facility sorts for the purpose of coㅁins with the changing rural living environment. In the four aspects of plan establishment, project implementation, comprehensiveness and linkage between programs, this study made an analysis of the existing RLERP that has 4-stage hierarchy, namely, Gun(county), Myun(primary administrative district), village and project site level Firstly, Myun and upper level policy programs fulfill the comprehensiveness and planning aspects, but have defects in the implementation and linkage aspects. Secondly, the village level programs satisfies more or less the four condition, but give rise to the problems of equity between the project target village and the non-target, and of generalization of the planning method applying to a specific village. At last, project level programs, controlled by several ministries, have defects in comprehensiveness and linkage aspects, exposing the sectoralism of central government. Above all, the existing RLERP has so many facility items, which have led to inefficient investment till now. Therefore, it's necessary that the environmental facilities should be selected(simultaneously reduced ), referring to following 5 criteria. (1) Exception of facilities relating to agricultural production. (2) Confined to public facilities to be constructed by government support. (3) Common-use facilities located in small town and below level area. (4) Consideration of not only the present need but also the future need of rural residents. (5) Reflection of a regional difference of mountain, plane and suburban area. Just 13 kinds of living environmental facilities are finally selected as the result of the selecting work, which can be an new alternative for RLERP. Concludingly, the selected facility items should be integrated into a designated project site by the prepared plan in order to enhance the efficiency of RLERP, investment and also to satisfy the four analytic aspects mentioned above.

• The Korean Journal of Applied Statistics
• /
• v.28 no.2
• /
• pp.325-334
• /
• 2015

Elderly suicide rates tend to be high in Korea. Suicide by the elderly is no longer a personal problem; consequently, further research on risk and regional factors is necessary. Disease mapping in epidemiology estimates spatial patterns for disease risk over a geographical region. In this study, we use a simultaneous conditional autoregressive model for spatial correlations between neighboring areas to estimate standard mortality ratios and mapping. The method is illustrated with cause of death data from 2006 and 2010 to analyze regional patterns of elderly suicide in Korea. By considering spatial correlations, the Bayesian spatial models, mean educational attainment and percentage of the elderly who live alone was the significant regional characteristic for elderly suicide. Gibbs sampling and grid method are used for computation.