• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.94-100
• /
• 2010

Purpose: The purpose of this study was to compare the fracture strength of the zirconia ceramic crowns according to tooth position. Material and methods: After 10 metal dies were made for each group, the zirconia ceramic crowns were fabricated using CAD/CAM system ($Lava^{TM}$ All-Ceramic System) and each crown was cemented on each metal die with resin cement (Rely $X^{TM}$ Unicem). The cemented zirconia ceramic crowns mounted on the testing jig were inclined with 30 degrees to the long axis of the tooth and the universal testing machine was used to measure the fracture strength. Results: 1. The fracture strength of the zirconia ceramic crown in the lower 1st molar (2963 N) had the highest and that in the lower central incisor (1035 N) had the lowest. 2. The fracture strength of zirconia ceramic crown was higher than that of the IPS Empress crowns in all tooth position. 3. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the long axis of the crowns. 4. There were no significant differences on the fracture strength of the zirconia ceramic crowns according to tooth position except in premolar group. Conclusion: Within the limitations of this study, the results suggested that strength of zirconia ceramic crown is satisfactory for clinical use.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.271-277
• /
• 2015

PURPOSE. This study was to evaluate the marginal fit of two CAD-CAM anatomic contour zirconia crown systems compared to lithium disilicate glass-ceramic crowns. MATERIALS AND METHODS. Shoulder and deep chamfer margin were formed on each acrylic resin tooth model of a maxillary first premolar. Two CAD-CAM systems (Prettau$^{(R)}$Zirconia and ZENOSTAR$^{(R)}$ZR translucent) and lithium disilicate glass ceramic (IPS e.max$^{(R)}$press) crowns were made (n=16). Each crown was bonded to stone dies with resin cement (Rely X Unicem). Marginal gap and absolute marginal discrepancy of crowns were measured using a light microscope equipped with a digital camera (Leica DFC295) magnified by a factor of 100. Two-way analysis of variance (ANOVA) and post-hoc Tukey's HSD test were conducted to analyze the significance of crown marginal fit regarding the finish line configuration and the fabrication system. RESULTS. The mean marginal gap of lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) was significantly lower than that of the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) (P<.05). Both fabrication systems and finish line configurations significantly influenced the absolute marginal discrepancy (P<.05). CONCLUSION. The lithium disilicate glass ceramic crown (IPS e.max$^{(R)}$press) had significantly smaller marginal gap than the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia). In terms of absolute marginal discrepancy, the CAD-CAM anatomic contour zirconia crown system (ZENOSTAR$^{(R)}$ZR translucent) had under-extended margin, whereas the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) and lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) had overextended margins.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.244-251
• /
• 2017

PURPOSE. The purpose of this study was to determine fracture resistance and failure modes of three-unit fixed dental prostheses (FDPs) made of lithium disilicate pressed on zirconia (LZ), monolithic lithium disilicate (ML), and monolithic zirconia (MZ). MATERIALS AND METHODS. Co-Cr alloy three-unit metal FDPs model with maxillary first premolar and first molar abutments was fabricated. Three different FDPs groups, LZ, ML, and MZ, were prepared (n = 5 per group). The three-unit FDPs designs were identical for all specimens and cemented with resin cement on the prepared metal model. The region of pontic in FDPs was given 50,000 times of cyclic preloading at 2 Hz via dental chewing simulator and received a static load until fracture with universal testing machine fixed at $10^{\circ}$. The fracture resistance and mode of failure were recorded. Statistical analyses were performed using the Kruskal-Wallis test and Mann-Whitney U test with Bonferroni's correction (${\alpha}=0.05/3=0.017$). RESULTS. A significant difference in fracture resistance was found between LZ ($4943.87{\pm}1243.70N$) and ML ($2872.61{\pm}658.78N$) groups, as well as between ML and MZ ($4948.02{\pm}974.51N$) groups (P<.05), but no significant difference was found between LZ and MZ groups (P>.05). With regard to fracture pattern, there were three cases of veneer chipping and two interfacial fractures in LZ group, and complete fracture was observed in all the specimens of ML and MZ groups. CONCLUSION. Compared to monolithic lithium disilicate FDPs, monolithic zirconia FDPs and lithium disilicate glass ceramics pressed on zirconia-based FDPs showed superior fracture resistance while they manifested comparable fracture resistances.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.421-429
• /
• 2001

Since Non-Extraction treatment in some orthodontic case shows unstable result and unfavorable profile, extraction is selected as inevitable treatment option for the harmonious profile, facial skeleton, and the stable dentition on both arches. For the achievement of proper goal, premolars, molars, sometimes incisors or canines are selected to be extracted. The first Premolar is usually extracted for relieving the crowded dentition with which the molar relations are class I to gain stable dentition and proper profile, but often results in the depression of profile or the loss of vortical dimension. On the contrary, the extracton of the second molar helps maintaining the fullness of profile and the vertical dimension, prevents additional space closural procedures which often make the procedures complicated, relieves both anterior and posterior crowding, and substitutes the extraction fossae for newly erupting 3rd molars. From the point of recurrence, the second molar extraction procedure, therefore, is more beneficial. This cases showed the good results of second molar extraction procedures in the patients with class I crowding.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.4
• /
• pp.574-578
• /
• 2002

Mesiodens is developmental tooth anomaly which is commonly found in clinical pediatric dentistry. however, it may cause many partial problem in tooth alignment when congenitally missing teeth was accompanied by mesiodens. The terms, concomitant hypodontia and hyperdontia' and oligo-pleiodontia' have been used to describe the condition in witch developmental absence of teeth and supernumerary teeth are present in the same individual. Only a few case reports of this rare condition which is opposite developmental phenomena exist in the literature. The purpose of this study is survey of congenitally missing teeth in mesiodens case and to compare previous literature of congenitally missing teeth in normal. The subjects were 310 children(247 male and 63 female) at the age from 5 to 12 years visiting the Department of Pediatric Dentistry, Pusan National University Hospital with mesiodens for last 3 years. With their pantomograms we studied congenitally missing teeth except permanent 3rd molar. 1. The preference of congenitally missing teeth in mesiodens cases was revealed to be 17.1%(53 out of 310 in total), and there was a higher prevalence in females(22.2%) than in males(15.8%). 2. The most frequently missing teeth were maxillary lateral incisors(22.7%) and mandibular second premolars(22.7%), followed by maxillary second premolar(17.3%), and mandibular lateral incisors(16.0%). There was no significant differences between maxilla(49.3%) and mandible(50.7%). 3. In number of congenitally missing teeth per person, 69.9% had one missing tooth, 22.7% had two missing teeth and 9.4% had three missing teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.422-428
• /
• 2006

Dentin bonding system have recently been developed in an effort to simplify and shorten bonding procedure. The intent of this study was to evaluate microleakage of newer generation of dentin bonding system comparing with other generations. Forty extracted human premolar teeth were randomly assigned to four groups for bonding : the 4th generation bonding system (Scotchbond Multi-Purpose). the 5th generation bonding system (Clearfil SE Bond), 6th generation bonding system (AQ bond) and 7th generation bonding $system(i-bond)^{TM}$ Class V cavities were prepared in buccal and lingual surface. The cavities were restored with composite resin (Z100) after the application of dentin bonding systems according to the instructions of the manufacturer Samples were thermocycled and immersed in methylene blue dye(2%). Each sample was sectioned with Isomet and evaluated for microleakage using stereomicroscopy. The mean value of the microleakage in 7th generation bonding system was greater than those of 4, 5, 6th generation dentin bonding system. Statistically, the mean values of microleakage between 4th and 7th generation bonding system were significantly different from each other (p<0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.404-411
• /
• 2012

Tooth impaction is defined as a failure of tooth eruption resulting from the physical obstacles in the eruption path or the abnormal position of the tooth germ. Impaction of mandibular second molar is relatively rare, and it may incite pathologic conditions such as dental caries, periodontitis, or root resorption of adjacent first molar. Thus, early diagnosis and treatment is recommended. In the first case, a 10-year-old male patient, was treated by brass wire to separate the bilaterally impacted mandibular second molars. In the second case, a 12-year-old female patient, was treated with Humphrey appliance for impacted mandibular left second molar, which was detected during a periodical dental examination. In the third case, a 17-year-old female patient with impacted mandibular right second molar, was treated by uprighting spring with mini-implant anchorage around premolar area. In the last case, an 18-year-old male patient, was treated with mini-implant placed on the ramus of mandible connected to the orthodontic buttons bonded on impacted mandibular left second molar by elastic thread.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.390-396
• /
• 2012

Infraocclusion is defined as tooth whose relative occlusal movement was blocked during the period of active eruption due to ankylosis and so on. Then infraoccluded tooth remains under the occlusal plane composed by adjacent structures showing normal eruption patterns. Untreated infraocclusion may cause: prolonged retention of infraoccluded teeth; extrusion of apposed teeth; destruction of periodontal tissues by occlusal force and food packing; increased sensitivity for dental caries; and disturbances on eruption pathway of succedaneous teeth. Therefore, periodic check-ups and proper treatments are required. There are many treatment options on infraoccluded deciduous molars such as periodic observation, conservative method, restoration and space regaining with extraction of the teeth. The choice of treatment may depend on the presence of succedaneous teeth, time of diagnosis and degree of infraocclusion. In this case report, three patients showing displacement of the second premolars due to infraocclusion of upper second primary molars, were treated by means of space regaining with removable orthodontic appliances and extraction of ankylosed primary molars. All malpositioned permanent premolars in the 3 cases showed ordinary eruption pathways after treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.647-653
• /
• 2009

Tooth transposition is an anomaly of eruption characterized by the interchanged positions of two adjacent teeth, which is divided into complete and incomplete transposition. There are three common approaches for treating transposition: aligning the involved teeth in their transposed positions, moving them to their correct anatomic position in the arch and extracting one of the transposed teeth. Considerations in treatment plans are esthetic, function, risk of jeopardizing the roots and damaging the supporting structures, position of the root apex, developmental stages of teeth and expected compliance. The presented case reports described one maxillary canine-the first premolar transposition and two mandibular lateral incisor-canine transpositions. The former transposed teeth were arranged in their transposed position, and the latter transposed teeth were rearranged into their normal position.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.580-585
• /
• 2009

Pediatric dentists often meet children with abnormal in number of tooth. Presence of supernumerary teeth is frequent cause of malocclusion. Etiology for supernumerary teeth is not yet clearly defined, but it is thought to be caused by excessive proliferation of dental lamina by hereditary and environmental factors. Supernumerary teeth occur in the maxilla nine times more frequently than in the mandible. Most common supernumerary tooth is the mesiodens in the maxilla, and some are observed in the maxillary molar and mandibular premolar. It occurs rarely in the mandibular incisor region with the incidence of 1-2% among all supernumerary teeth. A six-year old boy visited the department of the pediatric dentistry, Yonsei University Dental Hospital, with the chief complaint of crowded supernumerary teeth on the mandibular incisor region. Clinical and radiographic examinations revealed six permanent mandibular incisors similar in size, shape, and length. Further investigation using computed tomography(CT) was proceeded on the mandible to measure and compare morphologic features and positions of the six incisors. Then, we decided to remove two incisors which were already erupted. Periodic check-up was followed to monitor the dental development and spontaneous positional enhancement of the remaining four incisors in the mandible.