• Geomechanics and Engineering
• /
• 제29권2호
• /
• pp.99-111
• /
• 2022

Instability of bolted rock mass has been a major hazard in the underground coal mining industry for decades. Developing effective support guidelines requires understanding of complex bolted rock mass failure mechanisms. In this study, the dynamic failure behavior, mechanical behavior, and energy evolution of a laboratory-scale bolted specimens is studied by conducting laboratory static-dynamic coupled loading tests. The results showed that: (1) Under static-dynamic coupled loading, the stress-strain curve of the bolted rock mass has a significant impact velocity (strain rate) correlation, and the stress-strain curve shows rebound characteristics after the peak; (2) There is a critical strain rate in a rock mass under static-dynamic coupled loading, and it decreases exponentially with increasing pre-static load level. Bolting can significantly improve the critical strain rate of a rock mass; (3) Compared with a no-bolt rock mass, the dissipation energy ratio of the bolted rock mass decreases exponentially with increasing pre-static load level, the ultimate dynamic impact energy and dissipation energy of the bolted rock mass increase significantly, and the increasing index of the ratio of dissipation energy increases linearly with the pre-static load; (4) Based on laboratory testing and on-site microseismic and stress monitoring, a design method is proposed for a roadway bolt support against dynamic load disturbance, which provides guidance for the design of deep underground roadway anchorage supports. The research results provide new ideas for explaining the failure behavior of anchorage supports and adopting reasonable design and construction practices.

• 한국보건간호학회지
• /
• 제15권1호
• /
• pp.96-110
• /
• 2001

The purpose of this study was to examine the effect of emotional and informational support intervention on role stress and depression of primary family caregivers caring stroke patients and to develop an effective nursing intervention method for them. This study selected the quasi-experiment, based on pre-test and post-test design of non-equivalent control group as a method of study. This study was conducted with 69 primary family caregivers caring stroke patients hospitalized in K and D hospitals in Daegu from August 20 to October 25, 2000. Out of them, 34 were placed in the experimental group, and 35 in the control group. The emotional and informational intervention program was divided into two aspects-emotional support and informational support- and executed three times, using prepared instruments and a guidebook. The intervention program consisted of the 1st intervention for one or one-half hour, the 2nd intervention for 30 minutes in two or three days after the 1st intervention. and the 3rd intervention for 30minutes in another two or three days after the 2nd intervention. Pre-test was carried out just before the 1st intervention, and the post-test was carried out right after the 3rd intervention, in order to collect data. The measuring instrument of role stress used was one that was modified to the role stress instrument of Yang Young-hee(1992) and the stress instrument of Choi Eun-sook (1992). The reliability was Cronbach's $\alpha=.8271$. The measuring instrument of depression used was one that was developed by Beck(1967) and standardized by Han Heung-moo et al(1986). The reliability was Cronbach's $\alpha=.8693$. Data were analyzed with percentage, mean, standard deviation, $x^2-test$, t-test and Paired t-test by using SPSS 9.0 program. The results of this study are summarized as follows: 1. Role stress score of the experimental group was revealed to be significantly lower than that of the control group 2. Depression score of the experimental group was revealed to be significantly lower than that of the control group Accordingly, the emotional and informational support intervention can be a way to reduce role stress and depression of primary family caregivers caring stroke patients.

• 대한조선학회논문집
• /
• 제50권6호
• /
• pp.458-465
• /
• 2013

Ship design engineering refers to the development and design of shipbuilding architectures in a drawing which reflects all relevant manufacturing processes. This paper provides analysis methods for model-information interfaces between hull structure design and outfitting design, and a technical application for manufacturing phases reflecting the pipe support pad and angle item automatically. The existing information procedure of pipe support pad and angle system processes information using drawing without model specification. Outfitting design team directly distributes drawings to the shop floor then manual-based marking and installation work are conducted refer to the distributed drawings. As a result, this process has become time consuming and causes problems in the productivity and quality improvement due to the rework caused by omitted or incorrect marking. The pipe support pad and angle marking is a method that automatically updates model information to hull structure design using sets of data that analyse the generated model in outfitting design processes. Therefore, this approach provides an efficient solution through design references without manual activities such as a reflection of hull structure design, cutting process, numerical control work, and dimension measurement and marking. The conversion of a method from the existing procedure based on manual marking to the reflective and automatic approach would have enabled to proceed installation work without manual activities for the measurement. Therefore, this research study proposes an efficient approach using pre-data analysis of model information interfaces between design and manufacturing phases to improve productivity during construction for shipbuilding.

• 한국콘텐츠학회논문지
• /
• 제9권7호
• /
• pp.371-378
• /
• 2009

많은 학습시스템이 학습자의 학습효율을 높이기 위하여 학습 난이도를 평가 및 적용하고 있다. 그러나 대부분의 적용방법들은 학습 전 또는 학습 후 학습결과를 분석할 때 산출되어 학습자가 학습도중에 난이도를 변경하면서 학습 콘텐츠를 제공받기 어렵다. 본 연구에서는 학습자의 수준을 학습 과정 중에 적용하고, 이 수준에 맞는 학습 콘텐츠를 다음 학습에 바로 적용시키는 방법을 제시하였다. 이를 통해 학습자는 사전 검사를 통해 설정된 난이도에 따라 다음 학습 콘텐츠를 제공 받을 수 있어 학습향상에 도움이 될 수 있도록 하였다.

• 부모자녀건강학회지
• /
• 제12권1호
• /
• pp.37-45
• /
• 2009

Purpose: This study was done to review Taegyo types, the practice of Taegyo, factors of Taegyo, and the effect of Taegyo programs in Korea. Method: This study reviewed the preceding research related to Taegyo through websites, articles, and books. Result: As a result of a review of Taegyo types, the practice of Taegyo, factors of Taegyo, and the effect of Taegyo programs through websites, articles, and books, it was summarized that pregnant women were independent people able to practice Taegyo from pre-pregnancy to childbirth for baby's health. If she practiced encouraging behaviors of Taegyo with her husband's physical, emotional, and economical support, she and her husband would easily transition to parenthood and form strong attachments with their baby. In addition, the rate of mother's postpartum depression was decreased. However, some pregnant women felt a psychological, social, and economical pressure to practice Taegyo. Conclusion: Activating organized and accessible to support systems and community networks, such as community health centers, nurses can help pregnant couples to increase self-care through the performance of Taegyo.

• 대한안전경영과학회지
• /
• 제1권1호
• /
• pp.19-28
• /
• 1999

This paper presents the safety management model, which is appropriate for small-to-medium enterprises that rank the highest disaster rate. It is required for these companies to modify and improve the safety-related articles and it is peformed to compare and analyze the industrial disasters and safety management systems between large enterprises and small-to-medium enterprises. The basic direction of change of industrial safety healthy system must be classified to the dual direction. For large enterprises, it is focused on not pre-regulations but post-regulations based on the self-control safety management system. But for small-to-medium enterprises, it is required to intensify the safety management system and the safety responsibility for owners or administrators. Specially, the responsibility for disaster must be more strengthened by the penalty and the insurance method, and then it must be performed not only the financial support of government but also middle and long-term technical support by private safety organizations.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 1999년도 추계학술대회
• /
• pp.73-82
• /
• 1999

This paper presents the safety management model, which is appropriate for small-to-medium enterprises that rank the highest disaster rate. It is required for these companies to modify and improve the safety-related articles and it is performed to compare and analyze the industrial disasters and safety management systems between large enterprises and small-to-medium enterprises. The basic direction of change of industrial safety healthy system must be classified to the dual direction. For large enterprises, it is focused on not pre-regulations but post-regulations based on the self-control safety management system. But for small-to-medium enterprises, it is required to intensify the safety management system and the safety responsibility for owners or administrators. Specially, the responsibility for disaster must be more strengthened by the penalty and the insurance method, and then it must be performed not only the financial support of government but also middle and long-term technical support by private safety organizations.

• 대한전자공학회논문지SP
• /
• 제47권6호
• /
• pp.137-145
• /
• 2010

디지털 선박에서는 선박 내의 각종 센서로부터 측정된 디지털 데이터에 대한 정확하고 에너지 효율적인 관리가 필요하다. 그러나, 센서 네트워크에서 대용량 스트림 데이터를 제한된 네트워크, 전력, 프로세서를 이용하여 모든 센서 데이터를 전송하고 분석하는 것은 어렵고 효율적이지 못하다. 그러므로, 연속적으로 입력되는 데이터를 사전에 분류하여 특성에 따라 선택적으로 데이터를 처리하는 데이터 분류 기법이 요구된다. 본 논문에서는 디지털 선박 내에 다수 개의 센서(온도, 습도, 조도, 음성 센서)를 배치하고 효율적인 입력 스트림 처리를 위해서 슬라이딩 윈도우 기반으로 다중 Support Vector Machine(SVM) 알고리즘을 이용하여 사전 분류(pre-clustering)한 후 요약된 정보를 해쉬 테이블로 관리하는 효율적인 처리 기법을 제안한다. 해쉬테이블을 이용하여 다차원 스트림 데이터의 저장될 레코드 순서를 빠르게 찾아 저장 및 검색함으로서 처리 속도가 향상되고 메모리에 해쉬 테이블 만을 유지하면 되므로 메모리 사용량이 감소한다. 35,912개의 데이터 집합을 사용하여 실험한 결과 제안 기법의 정확도와 처리 성능이 향상되었다.

• 여성건강간호학회지
• /
• 제10권1호
• /
• pp.51-58
• /
• 2004

Purpose: To compare the difference of state anxiety, perceived support, and childbirth experience perception, between the primiparous's husband who participated in actual labor and delivery process with her wife after finishing Lamaze childbirth class education and the husband who did not finished Lamaze childbirth class, for providing the basic data for effective nursing intervention and pre-childbirth educational program development for husbands. Method: At one general hospital located in Kyunggi-do and one clinic in Seoul, from April 6th to May 12th, 2003, the subjects were 146 including 67 primipara's husbands who participated in the 5-week Lamaze educational program and 79 primipara's husbands who didn't, using structuralized questionnaire. Analysis: Mean, frequency, percentage, 2-test, and t-test were used by SPSS 10.0 program. Result: The sub-hypothesis 1, 'there are significant differences between anxiety of the group who participated in Lamaze and who didn't' was not accepted(t=-1.043, p=.299). The sub-hypothesis 2, 'there are significant differences between anxiety by cervical dilatation the group who participated in Lamaze program and who didn't' was not accepted(t=-1.123, P=.263, t=-.356, P=.722, t=-1.879, P=.062). The hypothesis 3, 'there are significant differences between perceived support of the group who participated in Lamaze program and who didn't' was accepted(t=4.860, P=.000). Especially, the obstetrical support of the group who participated in Lamaze program, which could reduce delivering pain, was higher. The hypothesis 4, 'there are significant differences between the perception of childbirth-labor experience of the group who participated in Lamaze program and who didn't' was accepted(t=2.816, P=.006). Conclusion: The Lamaze program was a effective nursing intervention for husband's affirmative perception of childbirth-labor experience as well as husband's role as active supporters during labor process. The change of present woman-centered pre-childbirth education into both partner-centered education stressing on husband's needs, viewpoint and role as a supporter should be considered. Therefore, hospital administrators should pay more attention on enhancing the opportunities of husband for pre-birth education and participating in the process of labor as a family-centered nursing intervention.

• 한국BIM학회 논문집
• /
• 제11권1호
• /
• pp.21-30
• /
• 2021

Reinforcing bars, a major component of the pre-fab structure, adheres to the existing on-site assembly method and attempts to develop and commercialize the technology of the pre-assembly method, but the effect is insignificant. Welded Wire / Bar Mat (WBM) has various advantages such as commercialization of rebar through machine manufacturing to improve workability, but it is different from the existing design and the construction method is different from the previous one. Therefore, to maximize the advantages of WBM and improve productivity, manufacturing, transportation, and construction from the design stage should be considered based on BIM from the initial design stage. In this paper, the concept of the design support system for the WBM was established based on the use of BIM in concrete reinforcement and the preliminary research on the WBM. WBM conversion design was performed for the existing prefabricated members, and based on this, the exchange format and system of the master prefabricated model with the WBM design data were set up. As a result of the pilot test, it was found that the traditional reinforcing bar information extracted from the master prefab model has transmitted 100% accurately. As for the WBM information, 100% of the information on the straight reinforcement was transmitted and represented, and the information on the bent reinforcement was found to have a 90% recall in the master BIM tool.