• Korean Journal of Metals and Materials
• /
• v.47 no.8
• /
• pp.494-499
• /
• 2009

As a novel method to produce a steel beam with 6mm thickness for buildings, a continuous roll forming process is reported. The roll shape is asymmetric and consists of 6 pairs of rollers to bend the steel plate from $0^{\circ}$ to $90^{\circ}$. Results obtained upon application of the roll forming process showed that the angle of the section plate is $90^{\circ}$. However, defects such as bowing and camber as high as 3.2 [$^{\circ}/m$] were observed. A FEM (Finite Element Method) analysis was applied to investigate the causes of the results for the region between rollers no. 5 and no. 6. The results of a FEM simulation of deformation and stress showed that there are some strong peak stresses on the upper surface and bottom surface of the material. The positions of the peak stresses did not show a correspondence between the upper and bottom surfaces. Thus, the defects in the process of roll forming with a 6 mm thick steel plate occur by the unbalanced stresses between the upper surface and bottom surface of the material in this study.

• Journal of Apiculture
• /
• v.32 no.4
• /
• pp.281-293
• /
• 2017

Sacbrood virus (SBV) is one of the main pathogenic RNA viruses of honeybee. SBV is found worldwide and many local strains have been reported, such as kSBV, cSBV, and wSBV. In this study, SBV-specific DNA fragments were cloned and sequenced by reverse-transcription PCR from 4 populations of A. mellifera, 4 sequences from 1 population belonged to the 2134D51 genotype (349 nucleotides, nt) and 12 sequences from 3 populations belonged to the 2100D0 genotype (400 nt) among the 16 determined sequences. A total of 87 points of mismatches were found by comparison with the most similar sequences in GenBank. Seventeen single-nucleotide polymorphisms (SNP) were detected, and 6 SNP-patterns in the 2100D0 genotype and 2 SNP-patterns in the 2134D51 genotype were identified based on SNP positions. In SNP-pattern 2, 10 SNPs were detected, but only 2 SNPs were found in SNP-pattern7. Meanwhile, one SNP-pattern was found from one RNA-sample, multi SNP-patterns were detected from other RNA-samples. Large numbers of SNP variants indicate that vast numbers of point-mutations on SBV have occurred since SBV invaded Korea and that SNP smay have been introduced individually over time. Thorough analysis of SNP variants will not only define the local infection-route, but also the relationships between SNP-pattern and SBV-pathogenic abilities.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.4
• /
• pp.21-35
• /
• 2007

In ad hoc networks, position-based routing schemes, that use geographical positions of nodes, have been proposed to efficiently route messages. In these routing schemes, the location service is one of the key elements that determines and effects security and efficiency of the protocol. In this paper, we define security threats of location service and propose a new quorum based location service protocol. In our proposed protocol, nodes register their public keys in other nodes during the initialization phase and these registered keys are used to verify locations of other nodes and the messages exchanged. In this paper, we prove that our protocol is robust against traditional attacks and new attacks that may occur due to the use of position-based routing. We also analyze the efficiency of our protocol using various simulations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.3
• /
• pp.123-132
• /
• 2021

To determine 3D(three-dimensional) positions using a stereo-camera in close-range photogrammetry, camera calibration to determine not only the interior orientation parameters of each camera but also the relative orientation parameters between the cameras must be preceded. As time passes after performing camera calibration, in the case of non-metric cameras, the interior and relative orientation parameters may change due to internal instability or external factors. In this study, to evaluate the stability of the stereo-camera, not only the stability of two single cameras and a stereo-camera were analyzed, but also the three-dimensional position accuracy was evaluated using checkpoints. As a result of evaluating the stability of two single cameras through three camera calibration experiments over four months, the root mean square error was ±0.001mm, and the root mean square error of the stereo-camera was ±0.012mm ~ ±0.025mm, respectively. In addition, as the results of distance accuracy using the checkpoint were ±1mm, the interior and relative orientation parameters of the stereo-camera were considered stable over that period.

• International Journal of Computer Science & Network Security
• /
• v.21 no.5
• /
• pp.151-159
• /
• 2021

This article addresses the issue of finding optimal solutions using the information technologies of accounting and analysis in modern companies. The aim of the study is to reveal available information technologies for the needs of small, medium and large businesses operating in modern conditions. This goal is achieved by using systematization, comparison, and analysis of information, obtained under the survey and open management statistics. For the first time, the paper systematizes up-to-date information of 2021 about the most popular programs, online services, platforms and cloud services that are used to improve accounting and analytical processes in enterprises of various sizes. The main global trends in software development in terms of COVID-19 pandemic have been identified. In particular, the study defines the countries that occupy the leading positions in the informatization of business processes. An attempt was made to classify information technologies by their use by various volume of businesses. The analysis of research results of the Internet search query frequency regarding the use of information technologies enabled to determine the most popular software products worldwide. The peculiarities of information technologies, their advantages and disadvantages were examined and the common and distinctive features were compared. It was determined that for the new enterprises to implement information technologies, it is necessary to conduct a step-by-step study of all available software products. The software evaluation algorithm was described to help select the optimal software for the specific business processes. The paper also describes the way to solve the problem of using accounting and analysis software for the businesses of a specific kind of activity.

• The Korean Journal of Franchise Management
• /
• v.12 no.2
• /
• pp.35-49
• /
• 2021

Purpose: The major objective of this study is to develop a model for the impact of franchisors' Gapjil (verbal·nonverbal Gapjil, abusing bargaining position, refusing transaction, false or exaggerated information, restrictive practices, unfair damage compensation) on franchisee's recontract intention. We also examine the mediating role of economic satisfaction and social satisfaction in the relationship between franchisors' Gapjil and franchisee's contract intention. Research design, data, and methodology: Data were collected from franchisee owners located nationwide in Korea. Out of 256 questionaires distributed, a total of 256 questionnaires were returned. After excluding 10 invalid respondent questionnaires, we coded and analyzed 246 valid questionnaires (effective response rate of 96.09%) using frequency, confirmatory factor analysis, correlations analysis, and structural equation modeling with SPSS 22.O and SmartPLS 3.0. Results: The findings of this study are summarized as follows: First, among the Gapjil of the franchisors, restrictive practices and unfair damage compensation had negative effects on economic and social satisfaction, but verbal and nonverbal Gapjil for economic and social satisfaction was not significant. Second, abusing bargaining positions and false or exaggerated information had negative effects on social satisfaction, but for economic satisfaction, found to be insignificant. Third, economic and social satisfaction had positive effects on the franchisee's recontract intention to the franchisor. Conclusion: The following implications of this study are as follows. First, the construct of Gapjil that occurs between the franchisors and the franchisees was first presented, and the franchisors' Gapjil is divided into interpersonal Gapjil and structural Gapjil. Second, the Gapjil of the franchisors can be an important predictor variable in maintaining and developing a long-term relationship between the franchisors and the franchisees. Third, solving conflict due to the Gapjil problem between franchisors and franchisees can be an important factor for franchisors and franchisees to co-survive and thrive in Korean franchise system. Fourth, this study suggest that managing the Gapjil of the franchisors was a important antecedent factor in maintaining long-term relationship between the franchisors and the franchisees. Therefore, this study will help franchisors formulate effective symbiotic marketing strategies to satisfy relationships with franchisees and consequently enhance long-term orientation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.514-521
• /
• 2021

When calculating an intersection collision speed using a formula, it is very difficult to grasp the degree of deceleration of a vehicle after the collision unless there is road surface trace in the entire section where each vehicle moved from the point of collision to their final positions after the collision. A vehicle's motion trajectory shows an irregular curve after a collision due to the effects of inertia based on the driving characteristics of the vehicle, the eccentric force according to the collision site, and the collision speed. Therefore, it is very important to set the appropriate departure angle after a collision for accurate collision speed analysis. In this study, based on experimental collision data using a computer simulation (PC-Crash), the correlation between an appropriate vehicle departure angle and the post-collision speed was analyzed, and then, a regression analysis model was derived. Through this, we propose a method to calculate collision speed by applying only the vehicle departure angle in some types of collisions for traffic accidents at intersections.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.26 no.2
• /
• pp.45-53
• /
• 2020

Purpose: The purpose of this study was conducted to investigate the effects of kinesio taping and coordination exercise on the myofascial pain syndrome and shoulder function. Methods: The patients with myofascial pain syndrome were participated in this study and divided randomly 2 groups. Control group (n=22) was taken only physical therapy program. Experimental group (n=22) was taken physical therapy with Kinesio taping and coordination exercise. The Kinesio taping in experimental group applied on levator scapulae and supraspinatus. The coordination exercise performed in supine position and sitting position on 15 times during 10 seconds each positions. We measured the pain degree using visual analog scale (VAS), pain rating score (PRS), pressure pain threshold (PPT), myofascial pain subjects symptoms index and shoulder motor function using constant shoulder assessment scale; CSA before and after experiment. Results: The significant test of CSA, myofascial pain subjects symptoms index, VAS, PRS according to applying the Kinesio taping and coordination exercise between groups used ANCOVA. In the result following analysis, there was significance on VAS (F=13.071, p=.031), PRS (F=12.130, p=.014), PPT (F=7.378, p=.016), CSA (F=5.302, p=.026) between control group and experimental group. Conclusion: Then, Kinesio taping and coordination exercise has benefit on the VAS, PRS, PPT, CSA in patients with myofascial pain syndrome. So, it may suggest that Kinesio taping combined with coordination exercise will be helpful of the pain and shoulder function improvement the patients with myofascial pain syndrome.

• Journal of Convergence for Information Technology
• /
• v.11 no.3
• /
• pp.205-211
• /
• 2021

This study utilizes PhotoVoice, a qualitative research method, to explore the life experiences of retirees by age in depth and derive the social welfare implications required for successful aging of retirees. Two participants in the study were selected in their 70s, 60s, and 50s, and 24 photos, explanations, 44 stories, and 92 data collected through group activities and personal interviews were analyzed. With the perception of successful aging, those in their 70s were "Preparing for a High Level of Social Responsibility and Dignity," those in their 60s were "Life of Social Responsibility and Service with Embarrassment and Boeun," and those in their 50s were "Life of Self-reliance with Economic Stability and Consideration." In order to prevent social problems for retirees with longer old age, research and social welfare policy support for their social jobs and volunteer positions are urgently needed, and the sooner the preparatory education is implemented so that they can prepare enough. This study is significant in that it played an important role in presenting basic data for the preparation of social welfare alternatives for retirees.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.744-750
• /
• 2020

In this paper, we propose a deep learning based transmit power control (TPC) scheme to improve the spectral and energy efficiency of wireless communication systems. In the wireless communication system, the positions of multiple transceivers follow a uniform distribution, and the performances of spectral and energy efficiency for the proposed TPC scheme are analyzed assuming the Nakagami fading channels. The proposed TPC scheme uses batch normalization to improve spectral and energy efficiency in deep learning based training. Through simulation, we compare the results of the spectral and energy efficiency of the proposed TPC scheme and the conventional one for various area sizes that limit the position range of the transceivers and Nakagami fading factors. Comparing the performance results, we verify that the proposed scheme provides better performance than the conventional one.