• 한국의류학회지
• /
• 제27권5호
• /
• pp.485-495
• /
• 2003

This study was to compare and analyze the clothing pressure according to arms movements of 4 brands jacket for middle-aged women group by measuring clothing pressure of each brand. The results were as follows: 1. According to the analysis of jackets of 4 brands, in general, jacket C had the largest ease amount. while jacket A had a large ease amount in waist, hip areas compared with bust area. Also jacket B had a small ease amount in bust, waist areas and jacket D had a small ease amount in hip areas. Therefore the ease amount is different between each brand, each size even though jacket designs are similar. 2. It was found that clothing pressure was affected by arm movements than jackets. Since this study was limited to the arm movement for motion variation, it was recognized that a significant difference among each jacket and each movement at shoulder, waist parts existed with relation to this motion. 3. Parts showing a significant difference among each size were bust point, abdomen point, center back point of abdomen level, angulus superior scapulae point and center back point of waist level. Also clothing pressure of size B91 was bigger than size B88 except Center back point of waist level. 4. Clothing pressure in shoulder point, front armpit point, back armpit point, upper arm point areas increased as the angle of the arms movement increased. Also, individual variation of clothing pressure in front armpit point, back armpit point, armpit point and upper arm point was large, and clothing pressure in abdomen point was high in M5(sitting posture).

• 설비공학논문집
• /
• 제29권9호
• /
• pp.482-495
• /
• 2017

Degree-days are practically used as a tool to estimate energy consumption for heating and cooling. Degree-days are calculated by summing differences of balance point temperature and outside temperature for the analyzed period. Determining balance point temperature is a key point in calculating accurate degree-days. However, ASHRAE standards are used for balance point temperature in Korea because balance point temperature considering climate conditions and building thermal performance is not proposed in Korea. This study proposes the process to generate balance point temperature for heating degree-days considering Korean climate and building conditions. Also, a new balance point temperature for three regions in Korea will be suggested in this study. Balance point temperature of Seoul is approximately $15.0^{\circ}C$, lower than the current standard of $18.3^{\circ}C$. Balance point temperature of Seoul considering climate conditions and building performance can be different from the ASHRAE suggested value ($18.3^{\circ}C$). Results revealed the current standard for balance point temperature should be changed considering climate and building conditions in Korea.

• 한국CDE학회논문집
• /
• 제18권1호
• /
• pp.49-57
• /
• 2013

In this paper, orthogonal projection of a point onto a 2D planar curve is discussed. The problem is formulated as finding a point on a curve where the tangent of the curve is perpendicular to the vector connecting the point on the curve and a point in the space. Existing methods are compared and novel approaches to solve the problem are presented. The proposed methods are tested with examples.

• 충청수학회지
• /
• 제6권1호
• /
• pp.53-57
• /
• 1993

Let E and F be Banach spaces with $X{\subset}E$ and $Y{\subset}F$. Suppose that X is weakly compact, convex and has the fixed point property for a nonexpansive mapping, and Y has the fixed point property for a multivalued nonexpansive mapping. Then $(X{\oplus}Y)_p$, $1{\leq}$ P < ${\infty}$ has the fixed point property for a multi valued nonexpansive mapping. Furthermore, if X has the generic fixed point property for a nonexpansive mapping, then $(X{\oplus}Y)_{\infty}$ has the fixed point property for a multi valued nonexpansive mapping.

• 전기학회논문지
• /
• 제63권4호
• /
• pp.519-525
• /
• 2014

In this paper, an alternative variable structure controller is designed for the point-to-point regulation control of uncertain general linear plants so that the output of plants can be controlled from an arbitrarily given initial point to an arbitrarily given reference point in the state space. By using the error between the steady state value of the output and an arbitrarily given reference point and those integral, a transformed integral sliding surface is defined, in advance, as the surface from an initial state to an arbitrarily given reference point without the reaching phase problems. A corresponding control input is suggested to satisfy the existence condition of the sliding mode on the preselected transformed integral sliding surface against matched uncertainties and disturbances. Therefore, the output controlled by the proposed controller is completely robust and identical to that of the preselected transformed integral sliding surface. Through an example, the effectiveness of the suggested controller is verified.

• 한국환경과학회지
• /
• 제13권6호
• /
• pp.497-503
• /
• 2004

In this research, we have performed a T-test to see how the relationship between dependent variable or visual point level and independent variable or visual quantity is in order to clear up the correlation between pattern of visual point and visual quantity by the constituents of a view from a different visual point level and the results are as follows: 1) In case of the character of Mt. Uam landscape of the city, Uamsan is set as a fixed point and about a direction of view(D), the north is a datum point from which the range of direction is distributed within 1800 westwardly and the visual range(R) is also within 2000m. An elevation is an average of 7.40 and the average story of the buildings is 3.85. Here the height of a story is about 4m so the average of the visual point difference is estimated at 15.4m. 2) The type of visual point is divided into the intersection group and the front of the highly used public buildings group. Double intersection types account for about 78.80%(52 spots) which forms a majority part of LCP. 3) The analysis of the difference of visual point level divided by eye level and that of the top of the buildings has been proved that there's a sharp difference resulted from t-test at 1 % significant level. The significant difference of elevation from height difference(l5.93m), however, has not been shown. 4) From the result of T-test about visual quantity by the elements of a view from a different visual point level, the visual quantity of mountain(VQM), sky(VQS), ground(VQG) is significant at about 1% each and that of building(VQB) is at about 5%. The difference in visual quantity of a mountain by the visual point level is at about 4% which can meet a marginal level of LCP necessary for evaluation of mountainscape.

• 전력전자학회논문지
• /
• 제19권5호
• /
• pp.407-414
• /
• 2014

This study proposes a control design for the grid output current and for reducing the neutral-point voltage oscillation through the small-signal modeling of the three-phase grid connected with a three-level neutral-point-clamped (NPC) inverter with LCL filter. The three-level NPC inverter presents an inherent problem: the neutral-point voltage fluctuation caused by the neutral-point current flowing in or out from the neutral point. The small signal modeling consists of averaging, dq0 transformation, perturbing, and linearizing steps performed on a three-phase grid connected to a three-level NPC inverter with LCL filter. The proposed method controls both the grid output and neutral-point currents at every switching period and reduces the neutral-point voltage oscillation. The validity of the proposed method is verified through simulation and experiment.

• 대한조선학회논문집
• /
• 제59권5호
• /
• pp.330-337
• /
• 2022

Research on object detection algorithms using 2D data has already progressed to the level of commercialization and is being applied to various manufacturing industries. Object detection technology using 2D data has an effective advantage, there are technical limitations to accurate data generation and analysis. Since 2D data is two-axis data without a sense of depth, ambiguity arises when approached from a practical point of view. Advanced countries such as the United States are leading 3D data collection and research using 3D laser scanners. Existing processing and detection algorithms such as ICP and RANSAC show high accuracy, but are used as a processing speed problem in the processing of large-scale point cloud data. In this study, PointNet a representative technique for detecting objects using widely used 3D point cloud data is analyzed and described. And RandLA-Net, which overcomes the limitations of PointNet's performance and object prediction accuracy, is described a review of detection technology using point cloud data was conducted.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1378-1381
• /
• 1995

Some interesting electrochemical characteristics of waterpen point-to-plate airgaps for dc and ac powers have been investigated at room atmosphere in a metal chamber. It is found that the ac discharge on the Pt point generated much ozone, while the negative do discharge on the waterpen point generated the highest ozone. And, the ac discharges of the waterpen point and the Pt point produced a little $NO_x$. But the dc discharge of the Pt point and waterpen point did not generated $NO_x$ anyway. As a result, it could be said that the water on the pen point acts something to generate ozone and $NO_x$ in room atmosphere.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1999년도 학술대회
• /
• pp.255-260
• /
• 1999

본 논문에서는 데이터 입출력을 고속으로 수행하며 작은 지연시간을 갖는 512-point FFT프로세서의 구조및 설계에 대하여 보인다. 설계된 512-point FFT프로세서는 OFDM방송에서 요구하는 심볼 레이트로 테이타를 처리할 수 있는 것을 목표로 하였다. 설계된 512-point FFT프로세서는 써플메모리를 이용하여 메모리의 요구사항을 최소화하며, 새로운 strength reduction method를 적용한 복소곱셈기를 이용하여 기존의 복소곱셈기에 비하여 하드웨어의 비용이 적은 특징을 갖는다.