• 한국작물학회지
• /
• 제50권1호
• /
• pp.60-66
• /
• 2005

Pod shape of twenty soybean (Glycine max L. Merrill) genotypes was evaluated quantitatively by image analysis using elliptic Fourier descriptors and their principal components. The closed contour of each pod projection was extracted, and 80 elliptic Fourier coefficients were calculated for each contour. The Fourier coefficients were standardized so that they were invariant of size, rotation, shift, and chain code starting point. Then, the principal components on the standardized Fourier coefficients were evaluated. The cumulative contribution at the fifth principal component was higher than $95\%$, indicating that the first, second, third, fourth, and fifth principal components represented the aspect ratio of the pod, the location of the pod centroid, the sharpness of the two pod tips and the roundness of the base in the pod contour, respectively. Analysis of variance revealed significant genotypic differences in these principal components and seed number per pod. As the principal components for pod shape varied continuously, pod shape might be controlled by polygenes. It was concluded that principal component scores based on elliptic Fourier descriptors yield seemed to be useful in quantitative parameters not only for evaluating soybean pod shape in a soybean breeding program but also for describing pod shape for evaluating soybean germplasm.

• 수산해양교육연구
• /
• 제26권4호
• /
• pp.831-837
• /
• 2014

This paper focuses on the effects of the changes in the resistance characteristics caused by the changes of the POD shape installed in the Hydrofoil vessel, using the CFD(Computational Fluid Dynamics). We input the POD sections' basic shape as the origin of the x and y axis. Then as we cut the x-axis 0 to 2 cm, and the more we cut it, the total resistance value had increased. However, we have recognized the fact that as we cut the POD section, 3 to 5 cm, the resistance value had rather decreased. Furthermore we found out the result that as the cut partition was larger; the POD cross-section would decrease, resulting in the linear decrease of the viscous force.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1106-1111
• /
• 2014

본 연구는 Hydrofoil 선박용 POD의 형상변화에 따른 압력분포 특성을 파악하기 위하여 CFD기법을 적용하여 수행하였다. POD 단면의 기본형상을 원점(상단)으로 하여 x축 방향으로 0cm(원본형상)에서 8cm까지 절단했을 때, 점성저항은 조금씩 감소하였으나, 압력저항은 조금씩 증가하는 결과를 얻었다. 하지만 동일한 조건하에서 9cm를 절단했을 경우에는 점성저항은 증가하고, 압력저항은 감소하는 경향을 보였다. 결론적으로, 압력저항이 점성저항에 비해 POD형상의 압력분포 특성에 많은 영향을 미친다는 것과 9cm를 절단한 근처에서 전체저항이 감소한다는 결론을 얻었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.72-77
• /
• 2011

In this study, the natural frequencies and mode shape of an external mounting pod were verified using the modal analysis and modal testing technique for a pod mounted on an aircraft. The procedure associated with the FEM building of an external mounted pod to predict the dynamic behavior of aircraft structures is described. The simplified FEM reflecting the results of the modal testing of a pod is built through the optimization, applied to the structural dynamic model of an Aircraft, used to verified the stability of vibration and flutter of an aircraft.

• Wind and Structures
• /
• 제21권1호
• /
• pp.63-84
• /
• 2015

The shape of a tall building has significant impact on wind force generation and wind-induced dynamic response. To study the effect of recessed cavities, wind excitations on a wind-tunnel model of an H-section tall building were compared with those on a square-section building model. Characteristics of the fluctuating wind pressures on the side faces of the two tall buildings and their role in the generation of crosswind forces on the buildings were investigated with the space-time statistical tool of proper orthogonal decomposition (POD). This paper also compares the use of different pressure data sets for POD analysis in situations where pressures on two different surfaces are responsible for the generation of a wind force. The first POD mode is found to dominate the generation of crosswind excitation on the buildings.

• 산업기술연구
• /
• 제28권B호
• /
• pp.135-141
• /
• 2008

In this paper, the Proper Orthogonal Decomposition (POD) method, which is a statistical analysis technique to find the modal characteristics of a structure, is adapted to identify the modal parameters of a tall chimney structure. A wind force time history, which is applied to the structure, is obtained by a wind tunnel test of a scale down model. The POD method is applied on the wind force induced responses of the structure, and the true normal modes of the structure can be obtained. The modal parameters including, natural frequency, mode shape, damping ratio and kinetic energy of the structure can be estimated accurately. With these results, it may be concluded that the POD method can be applied to obtain accurate modal parameters from the wind-induced building responses.

• The Plant Pathology Journal
• /
• 제17권6호
• /
• pp.354-356
• /
• 2001

In August 2001, pod rot of cowpea caused by Choanephora cucurbitarum was found in the experimental fields of the Gyeongsangnam-do Agricultural Research and Extension Services, Korea. Initial symptoms of the disease were the appearance of water-soaked, dark-green lesions and followed by rapid rotting of the infected tissues. As the disease progressed, whitish mycelia and monosporous sporangiophore with monosporous sporangiola were produced on the lesions. The fungus produced white to pale yellowish brown mycelia with scattered monosporous sporangiophore and monosporous sporangia containing sporangiospores on potato dextrose agar (PDA). Monosporous sporangiophore was long, slender and branched at the apex, with each branch bearing a sporangiospore. Sporangium was subglobose in shape and 42.6-112.6 ㎛ in size. Monosporous sporangiola were elliptic, fusiform or ovoid, brown in color, and 9.8-23.4$\times$7.2-12.8 ㎛ in size. Sporangiospores were elliptic, fusiform or ovoid in shape, dark brown or brown in color, 12.9-24.6$\times$8.6-15.4 ㎛ in size, and had three or more appendages. Zygospores were black and 43.6-72.4 ㎛ in size. The fungus grew on PDA at 15-40$\^{C}$, and optimum temperature was 30$\^{C}$. This is the first report on pod rot of cowpea caused by C. cucurbitarum in Korea.

• 한국작물학회지
• /
• 제36권6호
• /
• pp.540-544
• /
• 1991

유채의 협열개에 관한 기초자료를 얻고자 strain gauge를 이용하여 예취 후의 건조 중에 있는 유채 양질의 협열개 난역도를 측정하였던 바 다음과 같은 결과를 얻었다. 1. 협실의 발육에서 협은 개화 후 3-4일째에는 육안으로 볼 수 있었으며, 협장은 20일째 중에, 종자의 장경은 35일째에 최대에 달했고, 40일째 쯤에는 종자가 거의 구형으로 되었으며, 45일째 쯤에는 협의 굵기가 최대에 달했다 2. 예취 후의 협실수분함량의 추이는 예취 당시가 70%였고 house내에서 5일정도 건조한 결과는 30%에 달했고 14일째까지는 10%정도였다 3. 협열개 난역도는 협실수분함량이나 상대습도에 대응한 일변화가 보였으며 협실수분함량 및 상대습도가 낮을 수록 협열개가 어려웠다.

• 한국소음진동공학회논문집
• /
• 제22권6호
• /
• pp.495-501
• /
• 2012

In this study, the natural frequencies and mode shape of an external mounting pod were verified using the modal analysis and modal testing technique for a pod mounted on an aircraft. The procedure associated with the FE model building of an external mounted pod to predict the dynamic behavior of aircraft structures is described. The simplified FE model reflecting the results of the modal testing of a pod is built through the optimization and will be applied to the structural dynamic model of an aircraft which is used to verified the stability of vibration and flutter of an aircraft.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2007년도 추계학술대회
• /
• pp.97-100
• /
• 2007

A new evaluation method for the performance tests of the frozen air in a refrigerator using PIV(Particle Imaging Velocimetry) and POD(Proper Orthogonal Decomposition) techniques is introduced. A two-door refrigerator model was tested for the experiments. Actual temperature measurements were carried out for the drawer No.4 in refrigerator. By evaluating the characteristics of the interior flow of the refrigerator, an optimal shape of the drawer could be suggested through the PIV evaluation test. In this research, in order to find influences the turbulent kinetic energy contribution associated with the dynamic structures, we executed a POD analysis using the method of snapshots and the instantaneous fluctuating velocity field.