Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

Pressure distribution near truncated POD attached on hydrofoil vessel

Hydrofoil 선박용 POD 변형에 따른 압력분포 특성

  • Lee, Chun-Ki (Department of Navigation Science, Korea Maritime and Ocean University) ;
  • Kim, Hee-Sung (Department of Navigation Science, Korea Maritime and Ocean University) ;
  • Moon, Serng-Bae (Division of Navigation Science, Korea Maritime and Ocean University)
  • Received : 2014.10.07
  • Accepted : 2014.11.12
  • Published : 2014.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper has a purpose to find out the characteristics of pressure distribution according to the POD shape installed in the Hydrofoil vessel, using the CFD. The results showed that as we cut the POD cross-section's basic shape along the x-axis from 0 to 8cm, the viscous resistance had decreased, but then the pressure resistance had increased modestly. However, the cutoff length of POD cross-section shape has close to 9cm, the viscous drag had increased and the pressure drag had decreased. As a result, we found out that the pressure resistance made more effects in POD shape than the viscous resistance, and the total resistance decreased near the 9cm of cutoff length.

본 연구는 Hydrofoil 선박용 POD의 형상변화에 따른 압력분포 특성을 파악하기 위하여 CFD기법을 적용하여 수행하였다. POD 단면의 기본형상을 원점(상단)으로 하여 x축 방향으로 0cm(원본형상)에서 8cm까지 절단했을 때, 점성저항은 조금씩 감소하였으나, 압력저항은 조금씩 증가하는 결과를 얻었다. 하지만 동일한 조건하에서 9cm를 절단했을 경우에는 점성저항은 증가하고, 압력저항은 감소하는 경향을 보였다. 결론적으로, 압력저항이 점성저항에 비해 POD형상의 압력분포 특성에 많은 영향을 미친다는 것과 9cm를 절단한 근처에서 전체저항이 감소한다는 결론을 얻었다.

Keywords

References

  1. S. J. Ahn and O. J. Kwon, "Cavitation flow simulation for a 2-D hydrofoil using a homogeneous mixture model on unstructured meshes," Journal of Computational Fluids Engineering, vol. 17, no. 1, pp. 94-100, 2012 (in Korean). https://doi.org/10.6112/kscfe.2012.17.1.094
  2. S. J. Ahn, O. J. Kwon, and Y. P. Jung, "Viscous flow analysis of underwater propulsor using an unstructured overset mesh technique," Proceedings of the Korean Society for Computational Fluids Engineering Spring Conference, pp. 341-346, 2010.
  3. Y. D. Choi, Y. T. Kim, and Y. H. Lee, "CFD analysis of pressure pulsation and internal flow for a positive displacement hydraulic turbine," Journal of the Korean Society of Marine Engineering, vol. 31, no. 6, 687-693, 2007 (in Korean). https://doi.org/10.5916/jkosme.2007.31.6.687
  4. J. H. Jun, S. E. Lee, J. W. Kwon, and J. W. Son, "Analysis of flow around ship using unstructured grid," Proceedings of the Korean Society for Computational Fluids Engineering Spring Conference, 187-193. 2011.
  5. H. D. Lee, M. S. Jung, and O. J. Kwon, "Numerical analysis of unsteady viscous flows using a fast grid deformation technique on hybrid unstructured meshes," Journal of Computational Fluids Engineering, vol. 14, no. 3, pp. 33-48, 2009 (in Korean).
  6. D. J. Lee, K. S. Kim, and D. S. Byun, "Extraction of the ship movement information by a radar target extractor," Journal of the Korean Society of Fisheries Technology, vol. 38, no. 3, pp. 249-255, 2002. https://doi.org/10.3796/KSFT.2002.38.3.249
  7. H. W. Lee, H. R. Cho, J. S. Park, H. T. Kim, and Y. S. Yu, "Risk analysis for collision of multiple vessels or obstacles using fuzzy logic in maritime," Proceedings of the Korean Institute of Maritime Information and Communication Sciences, pp. 487-488, 2011.
  8. J. S. Park, G. H. Lee, and T. D. Phu, "Analysis of ship collision behavior on offshore windtower," Proceedings of the Computational Structural Engineering Institute of Korea, pp. 610-613, 2011.
  9. Y. S. Shin, "Numerical analysis of viscous flows on unstructured grids using the optimal method of strongly implicit procedure," Journal of the Society of Naval Architects of Korea, vol. 49, no. 2, pp. 196-202, 2012. https://doi.org/10.3744/SNAK.2012.49.2.196