• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.440-448
• /
• 2003

In the present paper, numerical simulations of buoyant plume dispersion in a neutral and stable atmospheric boundary layer have been carride out. A Lagrangian Stochastic Model (LSM) with a Non-Linear Eddy Viscosity Model (NLEVM) for turbulence is used to generate a Reynolds stress field as an input condition of dispersion simulation. A modified plume-rise equation is included in dispersion simulation in order to consider momentum effect in an initial stage of plume rise resulting in an improved prediction by comparing with the experimental data. The LSM is validated by comparing with the prediction of an Eulerian Dispersion Model (EDM) and by the measured results of vertical profiles of mean concentration in the downstream of an elevated source in an atmospheric boundary layer. The LSM predicts accurate results especially in the vicinity of the source where the EDM underestimates the peak concentration by 40% due to inherent limitations of gradient diffusion theory. As a verification study, the LSM simulation of buoyant plume dispersions under a neutral and stable atmospheric condition is compared with a wind-tunnel experiment, which shows good qualitative agreements.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.507-514
• /
• 2012

한국형 발사체의 플룸 형상과 플룸 복사열 해석을 위해 NASA LRB 플룸 복사 모델을 구현하였으며 열해석 소프트웨어인 Thermal Desktop에서 형상화하여 실제 복사 열전달을 계산하여 NASA 예측결과와 비교하였다. 계산 결과 NASA 예측과 비슷한 수준의 정확도를 나타냈으며 한국형 발사체에 적용 가능한 수준의 플룸 모델 형상을 제안하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.358-361
• /
• 2008

A study is made of thermal plume flow model for the development of helicopter simulator over the forest fire. For numerical analysis, the Boussinesq fluid approximation and line fire model, which is assumed by the shape of forest fire spreading, are adopted. Comparing 3-D full numerical solutions with 2-D similarity solution, it has been built a new model that is capable of temperature prediction along the symmetric vertical axis in both cases of laminar and turbulent flows.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.118-128
• /
• 2004

화염에 의한 종방향 공력 특성의 변화를 해석하기 위하여 고형 화염 모형을 이용한 풍동 시험과 고형 화염 모형과 제트 화염 모델을 이용한 난류 유동 수치 해석을 실시하였다. 화염 경계면 근사 가법을 이용하여 산출한 형상을 본떠 화염 모형을 제작하였으며 제트 화염 모델링 기법을 이용하여 공기와 실제 화염의 열역학적 차이로 인한 오차를 보정한 공기 제트 화염을 생생하였다. 화염과 외부 공기의 간섭에 대해 난류 모델간의 비교를 통하여 정확도와 격자 의존성 등에서 Spalart-Allmaras 모델이 좋은 결과를 주었다. 수치 해석을 통하여 고형 화염 모형과 제트 화염의 차이를 분석하였으며, 실제 비행 시험에 대한 화염 영향을 분석하기 위하여 연소실과 대기 압력 비와 레이놀즈수에 따른 변화를 해석하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.440-443
• /
• 2008

Plume radiation has been measured during ground tests of KSLV-I kick motor in order to predict the thermal load on the equipment around the kick motor at flight. The measuring positions are the kick motor base, and the measured heats were about 2${\sim}$5 w/cm$^2$. The measured heat showed a lot of shot fluctuation in their values, and the radiative heats at the latter half of time are higher than those of the first half. A plausible explanation for these phenomena was given as the variation of alumina particles with time. The radiative heats along the plume axis were also measured recently at 8 positions with 1.5m radius from plume axis, but only the initial parts of the results could be acceptable because the sensor were damaged by the accumulated heat. The strongest heat occurred at the middle of the plume, which can be explained with different view factors. Despite of the plausible explanation, it seems to need more analysis because the plume structure such as temperature, alumina particle, after burning has not been revealed until yet. The measure heat flux has been reflected in the prediction of the plume radiation at high altitude where the kick motor operates.

• 한국전산유체공학회지
• /
• 제9권3호
• /
• pp.18-25
• /
• 2004

Multi plume effects on the base heating have been Investigated with a CFD program. As the flight altitude increases, the plume expansion angle increases regardless of the single or clustered engine. The plume interaction of the clustered engine makes a high temperature thermal shear in the center of four plumes. At low altitude, the high temperature shear flow stays in the center of plumes, but it increases up to engine base with the increasing altitude. At high altitude, the flow from plume to base and the flow from base into outer free stream are supersonic, which transfers the high heat in the center of plumes to the base region. The radiative heat of the clustered engine varies from 220 kW/m² to 469 kW/m² with increasing altitude while those of the single engine are 10 kW/m² and 43.7 kW/m². And the base temperature of the clustered engine varies from 985K to 1223K, and those of the single engine are 483K and 726K. This big radiative heat of clustered engine can be explained by the active high temperature base flow and strong plume interactions.

• 한국대기환경학회지
• /
• 제14권2호
• /
• pp.81-94
• /
• 1998

Six complex terrain dispersion models recommended by the U. S. Environmental Protection Agency were investigated using a hypothetical case in which a plume approaches complex terrain. The six models considered were Valley, CTSCREEN, COMPLEX 1, SHORTZ, RTDM, and CTDMPLUS, the latter four being closely studied. Highest concentrations were predicted for 48 receptors and plume behaviors were compared for stable and unstable meteorological conditions. Under stable conditions, ground-level concentrations were determined by the height of the plume centerline above the terrain. The concentrations estimated by SHORTZ and COMPLEX I were higher than those estimated by CTSCREEN, with CTDMPLUS predicting the lowest concentrations. In particular, the height of the lift midpoint, as well as the co.nterline of the plume, are important in the model calculation of CTDMPLUS. Under unstable conditions, the vertical dispersion plays a key role in determining ground -level concentrations. For this case, concentrations predicted by CTDMPLUS were the 'highest, whereas those predicted by SHORTZ were the lowest. Concentration distributions predicted by CTDMPLUS are quite similar to typical Gaussian distributions even on complex terrain, except for a slight shift of the plume centerline due to the of(tract of the geostrophic wind. In addition,24-hour average concentrations were estimated for comparison with results from the Valley model. Among the four models studied closely, CTDMPLUS predicted the lowest 24-hour average concentrations, but the concentrations estimated by Valley were lower than those estimated by CTDMPLUS.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.545-552
• /
• 2013

This paper is a part of developing a computer code that can be used to generate IR images of a naval ship by considering the emitted and reflected infrared signals. The spectral radiance received by an IR sensor is consisted of the self-emitted component from the ship surface, the reflected component of the solar/sky irradiance at the ship surface, the emitted radiance from the ship surface and the exhaust plume gas, and the scattered radiance by the atmosphere. The plume gas radiance occupies a large part of the emitted radiance from a naval ship in operation. Therefore plume gas radiance must be taken into account when calculating the radiance from a naval ship for reliable IR images. In this paper, IR images of a naval ship with the exhaust gas effect in various environmental conditions are generated by using an exhaust gas prediction model called the JPL model. The contrast radiance (CR) values of the IR images are calculated to analyze the effect of the exhaust gas radiance quantitatively. The results obtained by quantitative analysis show that the IR signatures with the exhaust plume gas are 2.26 times larger than those neglecting the plume gas effect. The effect of the exhaust plume gas is shown to be more eminent in winter than in summer in the daytime.

• 항공우주기술
• /
• 제8권1호
• /
• pp.17-25
• /
• 2009

복사전달식에서 흡수 계수의 정확한 계산은 액체 엔진 저부의 단열재 설계의 입력 값으로 사용되는 플룸의 복사 열전달을 예측하는데 매우 중요하다. 이를 위해서 가스 흡수 계수를 직접 모델링 할 수 있는 WNB 모델을 중요 인자의 선정을 위주로 설명하였고, 그 결과를 비교적 정확한 기준 값을 제공하는 SNB의 결과와 비교하였다. 비교 인자들은 총 방사율, 좁은밴드 복사강도 및 총 복사강도이며, 결과적으로 방사율의 경우 주어진 조건에서 3.1% 이내, 총 복사 강도역시 5%이내의 계산결과를 보여 이 모델의 타당성을 확인할 수 있었다. 추가적으로, 액체 엔진의 연소가스들의 성분비를 예측하고 이 조건에 대한 가스모델링 인자를 계산하여 데이터베이스를 구축하였다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.368-376
• /
• 2004

영광부지의 추적자 확산실험결과의 자료동화를 통하여 Gaussian plume 모형의 확산인자의 수정과 추적자 방출률 평가를 수행하였다. 부지 주변의 여러 지점에서 관측한 실험결과에 선형계획법을 적용하여 확산평가에 있어선 가장 불확실성이 크다고 알려진 확산인자를 수정하였다. 원자력 비상시 초기 대응평가에 사용되는 정보 가운데 가장 큰 불확실성을 포함한 선원항 정보를 추적자 농도 분포로부터 추정하였다. 실험 당시의 추적자 방출량을 모른다고 가정하고 Gaussina plume 모형의 예측치와 확산실험의 실측치를 이용한 최소자승법을 적용하여 방출률을 추정하였다. 확산인자를 수정한 후 Gaussian plume 모형의 예측력은 방출점으로 3km 및 8km 떨어진 포집선 두 경우 모두 증가하는 것으로 나타났다. 실험당시의 방출률을 모른다고 가정하고 관측지점의 농도에 최소자승법을 적용한 결과 24%이내에서 실제 방출률을 양호하게 추정하고 있음을 확인할 수 있었다.