• 토지주택연구
• /
• 제10권3호
• /
• pp.43-55
• /
• 2019

본 연구에서는 수도권의 새로운 신도시 건설이 추진됨에 따라 향후 신도시 계획시 고려해야 할 지표와 개발방향에 대하여 고찰하였다. 이를 위해 분야별 전문가들을 대상으로 조사한 설문자료를 빈도분석과 분산분석기법을 이용해 분석한 결과, 다음과 같은 시사점들이 도출되었다. 첫째, 기존 1기 및 2기 신도시에 대해 계획지표들의 평가결과, 시민참여와 정보공유, 스마트기술과 서비스, 사회문화적 다양성과 포용성에서 부정적 평가가 많았다. 또한 3기 신도시에 대해 전문가들은 교통의 접근성과 편리성, 환경적 쾌적성, 주거의 질과 서비스 등 도시의 기본이 되는 요소인 교통, 환경, 주거의 중요성을 가장 높게 인식하고 있으며, 경관/디자인의 우수성, 일자리 등 자족성, 사회·문화적 다양성과 포용성 등도 중요한 지표로 꼽았다. 둘째, 전문가들의 인식과 평가가 성별, 연령, 직업, 전문분야 등 개인특성에 따라 차이가 있는지를 알아본 결과, 1기와 2기 신도시는 전문가 집단의 '성별'에서만 유의적 차이를 보였으며, 3기 신도시는 '성별'과 '전문분야'에서 유의적 차이가 있었다. 셋째, 향후 3기 신도시 개발계획 수립시 인구구조변화, 산업과 일자리, 삶의 질과 다양성, 환경 및 기후변화, 사회 및 주거복지 등을 중요하게 고려해야 한다고 보았다. 토지이용계획에서는 공원녹지 및 자족용지 확대를 중요하게 생각하였고 3기 신도시의 도시형태로 친환경 생태도시를 1순위로 꼽았으며, 중요한 생활인프라로 대중교통시설, 공원녹지, 교육시설을 매우 중요하게 보았다.

• 한국건설관리학회논문집
• /
• 제6권5호
• /
• pp.89-101
• /
• 2005

건축공사의 프로젝트 초기단계에 있어서 관련조직 간의 정보전달은 프로젝트의 수행방법을 결정하는데 중요한 영향을 미친다. 그러나 실제로는 체계적인 분석방법 보다는 현장관리자의 경험에 의존하여 중요한 의사결정이 수행되어 왔다. 예를 들면, 건축공사 프로젝트에서 공법선택은 설계자의 경험에 의존한 의사결정으로 진행되어 왔다. 이로 인해 시공단계에서 불필요한 공법변경사례가 발생하여 공기지 연 및 공사비 상승을 초래하였다. 주된 원인은 건축공사 프로젝트의 특성을 반영한 합리적인 의사결정 프로세스에 관한 검토가 체계적으로 이루어지지 않았기 때문이다. 따라서 합리적으로 공법을 선택할 수 있는 지원도구뿐만 아니라 생산설계가 필요하다. 본 연구는 프로젝트 초기단계에서 다양한 영향요인과 연계하여 체계적인 생산설계과정과 의사결정모델을 제안하는 것을 목적으로 하였다. 이러한 관점에서 연구의 목적을 달성하기 위해 다음과 같은 수순으로 연구를 진행하였다. 1)생산설계에 관한 선행이론을 분석하였으며, 2)구체공사에 있어서 프로젝트 제약조건의 분석을 통해 최적의 공법을 선택하는 과정에 대해서 고찰하였다. 3)생산설계의 문제점을 구체화하기 위해 사례연구내용을 분석하였다. 4)사례연구 및 전문가 면담의 결과를 분석함으로써 생산설계를 지원하기 위한 협력체 모델을 제안하였다. 제안된 모델은 유사한 프로젝트에 적용할 수 있도록 체계적으로 축적된 자료로 관리되고 관련조직간 정보전달을 개선할 수 있는 유효한 도구로서 활용될 수 있을 것으로 예상되어진다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.135-139
• /
• 2008

For deep basement construction of buildings downtown, the usage of Top-Down Method is increasing as much as ever from strong demand. One of the essential elements for the construction by Top Down Method is the pre-founded columns, which are installed in the ground and on which a building is installed. The fact that the pre-founded columns are placed in the ground makes them susceptible to its plumbness; this aspect distinguishes pre-founded columns from general columns. However, there are no criteria for erection tolerance. Therefore, field-measured-data concerning out-of-plumb of pre-founded columns in the construction field should be accumulated and investigated so that criteria and specifications for the erection tolerance of pre-founded columns may be established through the understanding of its aspects. In this paper, we investigate out-of-plumb of pre-founded columns for the construction case and analyze its aspects, and propose considerations for design and construction phase.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권5호
• /
• pp.234-241
• /
• 2005

The performance of passive conductor loop (hereinafter 'loop') method which is used to mitigate the magnetic field around overhead power transmission line is dependent on its configuration and installed location, which are affected by installation conditions of the loops such as objective areas and levels of magnetic field mitigation. Thus, because the design problem of loops is difficult and cumbersome by variety of their configuration and complexity of magnetic coupling mechanism, it is need to be formulated as a computer-based optimum problem to determine the most effective and reasonable loop model satisfying the installation conditions. In this paper, the optimum locations of the multi-wired multiple loops including series reactance compensations are searched by using the genetic algorithm (GA) to mitigate effectively the magnetic fields of relatively near points or far points from transmission line at Am height, and the magnetic fields mitigation characteristics of each loop are analyzed in the view of magnitude, direction and phase of cancellation fields by polarized vector concept to identify their adequacy and rationality for the installation objectives.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.58-66
• /
• 2005

Pseudo-Near Field Recording (Pseudo-NFR) system is proposed to prevent contamination and oxidation of media surface occurred in conventional NFR systems. To solve these critical problems of the NFR systems, we investigate the optimal thickness of cover layer for Pseudo NFR. This paper presents the theoretical analysis for cover layer thickness based on the measured length of dust particle and numerical simulation for the temperature distribution using Finite Difference Time Domain (FDTD) method and heat conduction equation. To verify the simulation results, we conduct and compare simulation results in case of far field MO recording and near field MO recording. A measured dust particle length in general environment was mostly less than $20{\mu}m$, and the optimal thickness of cover layer is $30{\mu}m$ in this case. Based on the designed optimal cover layer thickness, temperature distribution is simulated to have $800{\~}850^{\circ}C$.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.362-377
• /
• 2023

Optical information processing technology is characterized by high speed and parallelism, and the light features short wavelength and large information capacity; At the same time, it has various attributes including amplitude, phase, wavelength and polarization, and is a carrier of multi-dimensional information. Therefore, optical encryption is of great significance in the field of information security transmission, and is widely used in the field of image encryption. For multi-image encryption, this paper proposes a multi-image encryption algorithm based on a modified Gerchberg-Saxton algorithm (MGSA) in the Fresnel-transform domain and computational ghost imaging. First, MGSA is used to realize "one code, one key"; Second, phase function superposition and normalization are used to reduce the amount of ciphertext transmission; Finally, computational ghost imaging is used to improve the security of the whole encryption system. This method can encrypt multiple images simultaneously with high efficiency, simple calculation, safety and reliability, and less data transmission. The encryption effect of the method is evaluated by using correlation coefficient and structural similarity, and the effectiveness and security of the method are verified by simulation experiments.

• KIEAE Journal
• /
• 제15권6호
• /
• pp.69-80
• /
• 2015

Purpose: Since most simulation programs take the interface that lists up all the input variables representing all the functionalities, users must know where design variables of an Energy Conservation Measure (ECM) are located and also know what values are appropriate. This is why practitioner designers feel frustrated when they attempt to use simulation. The final objective of this study is to provide a building energy modeling guideline for practitioners in various fields such as architectural design and MEP. Method: As the first step of the modeling guideline, this study provides the Level of Detail (LOD) for simulation modeling of primary ECMs considering the design information available in each design phase. It is prepared by literature review, simulation functionality investigation, and field experts' survey. Result: The proposed simulation LOD offers a milestone at each design phases concerning what design variable and attributes need to be developed with how much of details in order to meet the project goal. Also each design team can set up a simulation usecase considering organizational characteristics based on the proposed LOD.

• KIEAE Journal
• /
• 제10권5호
• /
• pp.3-12
• /
• 2010

Sustainable design is getting to be controversial issue in all industries over the world particularly, in architecture as the amount of energy usage in architecture occupies 40%. Therefore, it is essential to make the standard for the sustainable design. In order to construct the sustainable design, firstly it should be considered that sustainable design elements based on natural resources to increase building energy efficiency is established and classified. The method of sustainable design divides into passive design and active design. Passive design method should be examined with active one simultaneously for more efficient usage of energy. Next, the study is followed how the sustainable design elements is adopted in buildings through the comparison of cases study of domestic and oversea. The result of case study shows similar adoption of sustainable design elements between oversea and domestic. However, the difference is shown in the building orientation and shape and the window size and position in Solar energy as well as high performance structure in Heat energy. These elements are the most significant elements in order to reduce energy load. In oversea, sustainable design is generated by architects, a client, and consultants based on the close cooperation in the beginning of early design phase before deciding building shape and envelope while in the domestic field adoption for sustainable design is conducted after deciding building shape and material. In order to design sustainable architecture more study is necessary in early stage for Zero Carbon and reducing building energy load through relation with specialists, a client and architects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.32-36
• /
• 1990

LPM is a characterized motor to reciprocate linear motion for the office automation(OA), the factory automation(FA) and the field of information instruments because it can generate direct drive without any mechanical converter. For the design and analysis of permanent magnet type linear, pulse motor, it is therefore necessary to investigate the characteristics of magnetic flux distribution, static and dynamic thrust force, normal force, etc, by analyzing its magnetic circuit. This paper describes various useful methods for improving the characteristics of LPM. And these method is adopted on the PM and flat type, double side 2-phase 8-pole LPM.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.351-352
• /
• 2006

There are many methodologies fur doing analysis of system's reliability in early design stage. Among the methods, PRISM is, as compared to MIL-HDBK-217, a newly developed technology but not easy to use. Because PRISM provides models that predict a part failure rate and field database, called EPRD and NPRD that can be combined with prediction models. This paper presents some capabilities of the prediction models in PRISM and usability of EPRD and NPRD database in system level reliability prediction.