• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.373-401
• /
• 2015

The UAV(Unmanned Aerial Vehicle, Drone) technology has been undergoing rapid progress, accompanied with a growth in the market. However, domestic industry standards and technology lag behind such progress happening on the international scene, and in particular in developed countries. Related regulations are also deemed lacking to address the issues that arise with such developments. Meanwhile, as the rise of UAV technology is a fairly recent phenomenon, the gap between Korea and developed countries is not too big. As this technology has high relevance to information and communication technologies, it also offers ample leeway for Korea to catch up in the field of UAV. As such, this paper seeks to provide a survey of the overall technology, market and regulations concerning UAV to identify possible measures on how to address any issues that may arise through proper policies. Due to the progress made in the field of UAV technology and increased penetration rate, striking a right balance between putting in place a proper regulatory system and establishing policies that foster growth in the field has risen as a very important issue. While the importance of establishing a legal system that helps prevent possible risks is indeed important, it must also be acknowledged that excessive regulation can also hinder technological progress. This, in turn would stagnate the market and dampen the entrepreneurial spirit in the society. In the case of new, practical technologies such as UAV, a prompt establishment of regulatory systems and policy measures in terms of policies is a requisite. In brief, in order to promote progress in the UAV industry and at the same time, for public safety and the protection of privacy, there should be an appropriate level on the easing and tightening of the regulation.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.3
• /
• pp.33-41
• /
• 2010

The rammed aggregate compaction pile method is widely used as soft ground improvement method because of the installed piles improve not only overall composite capacity but also discharge capacity. But the discharge capacity is declined when the clogging is generated due to the clay penetration into voids of rammed aggregate compaction pile with the time elapsed. The purpose of this study is to reduce the clogging problem occurred in rammed aggregate compaction pile constructed in the soft ground and to minimize voids of rammed aggregate compaction pile. The proper mixing ratio was determined which is based on the results of the large scale direct shear tests conducted to get strength and permeability as optimum mixing ratio of crushed stone and bottom ash. The test results indicated that the highest internal friction angle was obtained at 80:20 mixing ratio of crushed stone and bottom ash. The internal friction angle was declined when the mixing ratio of the bottom ash increased over 20%. The results of the clogging tests, presented that the mixture of 80:20 crushed stone and bottom ash is highest effective of clogging than ratio of pure crushed stone.

• The Journal of Engineering Geology
• /
• v.18 no.2
• /
• pp.185-190
• /
• 2008

Nine wells have been developed for uses of thermal waters at the Icheon hot spa area. Drilling depths of those hot spring wells range from 166 to 294 m and their piezometric heads are located at about 50 m below the surface. Using the differences between the surface and bottom temperatures within all boreholes, we can simply estimate geothermal gradient in this area. Thus, we obtained the highest, lowest and average gradient values as $64^{\circ}C/km$ from SB-2 well, $45^{\circ}C/km$ from SB-1 well and approximately $54.28^{\circ}C/km$, respectively. However, observing the MRD-2 well additionally drilled into the depth of 996 m, we found out that this study area has widely experienced the temperature disturbance due to thermal groundwater penetration through the fracture systems within the depth of 720 m. Unlikely this phenomenon, we can conclude that the groundwater flow below the depth of 720 m does not exist. Therefore, using only those temperature data below the 720 m depth, we can estimate reasonable geo-thermal gradient values as $33^{\circ}C/km$ in this study area. Pumping test shows that outflowing temperature is $36^{\circ}C$ corresponding to the temperature logging data at 720 m depth.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.651-661
• /
• 2021

Eruca sativa, called arugula, is a perennial plant in the Brassicaceae family, an edible plant commonly used in Italian cuisine. To study as a cosmetic material application E. sativa was extracted with 70% ethanol (ES). Then ES was fractionated using n-hexane, chloroform, ethyl acetate, n-butyl alcohol and water (EHex, EEA, ECHCl₃, EBuOH and EDW). EEA showed mushroom tyrosinase inhibitory activity. ES, EEA and EBuOH showed inhibition of tyrosinase activity. As a result, ES is expected to have skin whitening efficacy. ES was applied to 0.05, 0.1% the toner and emulsion formulation to test the stability. The anti-microbial activity of eight bacteria and fungi including Staphylococcus aureus and Propionibacterium acnes which cause dermatitis and acne was evaluated. EEA showed effects in all of microorganisms. The toner and emulsion containing ES with 0.05, 0.1% were passed in the challenge test. At -20, 4, 25, 55 ℃ and daylight, there was no significant change on pH, viscosity for 4 months. However, emulsions had phase separation phenomenon at 55 ℃, so the base formulation needs improvement. In addition, through the skin penetration test, EEA penetrated 0.058% in 6 hr, predicting the clinical efficacy. This means that E. sativa can contribute whitening agent and the synergistic effect of preservatives.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.159-167
• /
• 2023

Titanium dioxide (TiO₂) is commonly used in sunscreen formulations to protect the skin surface and prevent the penetration of harmful ultraviolet (UV) rays by the physical scattering action of light. However, a disadvantage of using TiO₂ is that it can cause white turbidity when used on skin due to its inactive mineral ingredient. In addition, when TiO₂ particles are reduced to nanosize to eliminate opacity, they can increase the transmittance of visible light and reduce whitening, but may lead to serious skin problems, such as allergic inflammation. To overcome these issues, the bandgap of TiO₂ was controlled by adjusting the amount of oxygen defect and nitrogen amount, resulting in color TiO₂ tailored to the skin. This innovative technology can reduce the whitening phenomenon and effectively block blue light, which is known to cause skin aging by inducing active oxygen. The bandgap controlled TiO₂ compounds proposed in this study are hypoallergenic, broad-spectrum, and environmentally friendly. Furthermore, these compounds have been shown to significantly enhance sun protection factor (SPF) of sunscreens, demonstrating their compatibility with blue light blocking products.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2A
• /
• pp.297-304
• /
• 2008

It is well known that cracks in concrete decrease permeability and durability of concrete because cracks enhance the penetration of water or corrosive chemicals like as chlorides, carbon dioxides, sulfates and some others. But some of cracks in hardened cements may be sealed in case of contacting water. This phenomenon is called "self healing" and it has a close relation to hydration products newly formed on surfaces of cracks. Many studies on self healing in concretes commonly showed that CSH gel has been observed on crack surfaces. And some studies have reported that calcium hydroxides and ettringite were observed as well as CSH gel on crack surfaces. This study was carried out to investigate hydration products formed by self healing process and also examine the influence of waterproof admixture for concretes on self healing of cement. As a result of XRD, DSC, SEM and EDX analysis of crack surfaces, it was found that self healing of cement was related to CSH gel, calcium hydroxides and ettringite. And waterproof admixture increased fibrous (needle-like) hydration products which were in network form. It is estimated that such fibrous products are effective for self healing process of cement system.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.307-315
• /
• 2023

In this study, mortar test specimens were produced by varying the mixing ratio of CO₂ reaction hardening cement (CSC) and general cement (OPC), and the mechanical and carbonation characteristics were evaluated by controlling the primary curing temperature and secondary curing CO₂ pressure. Under all curing conditions, it was observed that the higher the CSC ratio in the binder, the lower the mechanical properties. Specifically, a first curing temperature of 60 ℃ yielded higher mechanical properties compared to the case of 20 ℃, and a greater carbonation penetration depth was also observed. At a first curing temperature of 60 ℃, it was noted that the curing pressure and bending strength during the second CO₂ curing were inversely proportional, while the compressive strength showed a proportional relationship. This phenomenon is believed to be due to excessive carbonation, which reduces mechanical properties, and the fact that flexural strength is more sensitive to these properties compared to compressive strength. However, based on the evaluation of the limited curing conditions, it is evident that future test conditions need to be expanded and reviewed more thoroughly.

• Korean Journal of Food Science and Technology
• /
• v.6 no.2
• /
• pp.98-108
• /
• 1974

Fourteen varieties of Korean chestnut were subjected to the test of adaptability for processing and the possibilities of colored products development. The fruit size of Korean chestnut ranged $11{\sim}18g$ and these small fruits could not be expected to be utilized for the processing of Marron glaces which requires larger size as $25{\sim}30g$. As the storge period is extended the discoloration tendency of chestnut flesh was increasingly developed, however, the fresh chestnut has shown layer-separating phenomenon and ragged surface of fruit which delivers disagreeable appearance to the finished product. The principal factors of discoloration occurred during processing were the behavior of tannin and darkening rate shown on flesh differed each other among varieties; the Chukpa and Yuma variety have exhibited the most serious discoloration and the Taab-b variety, the lightest. Taab-b variety in this connection could be expected to be available for Kanroni processing. For the industrialization of chestnut processing the flame-scorched peeling method is advisable. The capacity of this method is proportional to the square of scorching radius and highly flexible in controlling its performance. As for the processing of colored product, the sugar dehydration and coating and the sugar penetration method demand further study in basical views; however, the canned product of chestnut-redbean has shown the possibility of being utilized as a substitute for or paralleled use with the sugar-syruped canned product which so far has been considered as the only item of export to Japan.

• Journal of the Korean Geographical Society
• /
• v.29 no.3
• /
• pp.266-280
• /
• 1994

Upper-air synoptic data and surface weather elements such as temperature, relative humidity, wind speed, cloud and precipitation were analyzed in some detail to determine the characteristics of Nopsae, a foehn-like surface wind over the Youngsuh region of Central Korea. NOAA AVHRR and GMS images are also referenced to identify the distribution of clouds and precipitation to classify the tpyes of foehn over the study area. The data period examined is from 1982 until 1993 of spring and summer months from March through August. Results of the anaylsis are as follows. Warm and dry air penetration over the Younesuh region has experienced on foehn days occured between March 21 and August 10 during study perion. The mean annual number of foehn the days were 28. Foehn phenomena were prominent during March 21-25, April 5-15, May 25-June 10, and June 26-30 pentads. The intensity of the phenomena can be evaluated as the difference of daily maximum temperature and relative humidity between windward sites and leeward sites. The intensity of daily maximum temperature reached 14.5$^{\circ}C$, but most values were in the range of 5.0-7.5$^{\circ}C$ (61%). Although strong intensity of foehns usually develop in June, it is common that farmers in the region experince more aridity during the foehnday of April and May due to the transplantation of rice seedlings. Long-run foehn are not common phenomena and 55% of foehn terminate in one day, but there is a record that Nopsae persisted up to 9 days continuously. The author identified using the cloud and precipitation data out of NOAA-11, AVHRR and GMS images is that one of them has no precipitation over windward side. The available data and the results of the analysis are somewhat inadequate. Since the results imply that wave phenomenon is potentially important in terms of local surface weather and vertical momentum transport, more detailed theoretical and observational studies are necessary to clarify the mechanism and the impacts of Nopsae.

• Asia pacific journal of information systems
• /
• v.17 no.2
• /
• pp.123-137
• /
• 2007

The advent of the Internet and related Web technologies has created an easily accessible link between a firm and its customers, and has provided opportunities to a firm to use information technology to support supplementary after-sale services associated with a product or service. It has been widely recognized that supplementary services are an important source of customer value and of competitive advantage as the characteristics of the product itself. Many of these supplementary services are information-based and need not be co-located with the product, so more and more companies are delivering these services electronically. Net-based customer service, which is defined as an Internet-based computerized information system that delivers services to a customer, therefore, is the core infrastructure for supplementary service provision. The importance of net-based customer service in delivering supplementary after-sale services associated with product has been well documented. The strategic advantages of well-implemented net-based customer service are enhanced customer loyalty and higher lock-in of customers, and a resulting reduction in competition and the consequent increase in profits. However, not all customers utilize such net-based customer service. The digital divide is the phenomenon in our society that captures the observation that not all customers have equal access to computers. Socioeconomic factors such as race, gender, and education level are strongly related to Internet accessibility and ability to use. This is due to the differences in the ability to bear the cost of a computer, and the differences in self-efficacy in the use of a technology, among other reasons. This concept, applied to e-commerce, has been called the "e-commerce divide." High Internet penetration is not eradicating the digital divide and e-commerce divide as one would hope. Besides, to accommodate personalized support, a customer must often provide personal information to the firm. This personal information includes not only name and address, but also preferences information and perhaps valuation information. However, many recent studies show that consumers may not be willing to share information about themselves due to concerns about privacy online. Due to the e-commerce divide, and due to privacy and security concerns of the customer for sharing personal information with firms, limited numbers of customers adopt net-based customer service. The limited level of customer adoption of net-based customer service affects the firm profits and the customers' welfare. We use a game-theoretic model in which we model the net-based customer service system as a mechanism to enhance customers' loyalty. We model a market entry scenario where a firm (the incumbent) uses the net-based customer service system in inducing loyalty in its customer base. The firm sells one product through the traditional retailing channels and at a price set for these channels. Another firm (the entrant) enters the market, and having observed the price of the incumbent firm (and after deducing the loyalty levels in the customer base), chooses its price. The profits of the firms and the surplus of the two customers segments (the segment that utilizes net-based customer service and the segment that does not) are analyzed in the Stackelberg leader-follower model of competition between the firms. We find that an increase in adoption of net-based customer service by the customer base is not always desirable for firms. With low effectiveness in enhancing customer loyalty, firms prefer a high level of customer adoption of net-based customer service, because an increase in adoption rate decreases competition and increases profits. A firm in an industry where net-based customer service is highly effective loyalty mechanism, on the other hand, prefers a low level of adoption by customers.