• Journal of architectural history
• /
• v.6 no.3 s.13
• /
• pp.23-44
• /
• 1997

There are two main halls in the Main Palace of the Koryo Dyansty in the 11th and 12th century. One, named Hoekyongjeon, was served only for special ceremony ; hundred Buddhist priests' sermons or receiption of Chinese emperor's letters. The other one, Kondukjeon, was used as ordinary throne hall. The ordinary throne hall was built when the palace was erected at the beginning era of the Koryo Danasty, while the special ceremony hall built after the reconstruction in the 11th century. The throne hall was located at northwest side of the special ceremony hall. Audience chamber and King's bedroom were located at west and northwest side of the throne hall. The basic layout of the Palace showed unsymmetrical shape. It seemed mainly effected by its undulating terraine. The acess road from main gate to the throne hall showed zigzag way, by following a stream penetrating the site obliquely, It could be said that the Main Palace of the Koryo Danasty achieved its originality on the aspect of unsymmetrical layout and zigzag acess road, which was not found in the former palaces.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.6 s.67
• /
• pp.1-7
• /
• 2005

This paper deals with the design and aerodynamic analysis of a special-type impulse turbine, with an end plate for wave energy conversion. Numerical analysis was performed using a CFD code, FLUENT. The main idea of the proposed end plate was to minimize the adverse effect of tip clearance of turbine blade, and was borrowed from ducted propeller, with so-called penetrating end plate for special purpose marine vehicles. Results show that efficiency increases up to $5\%$, depending on the flow coefficient; a higher flow coefficient yields increased efficiency. Decrease of input coefficient CAwith an end plate is the main reason for higher efficiency. Performance of end plate at various design parameters, as well as flow conditions, was investigated; the advantages and disadvantages of the presentimpulse turbine were also discussed.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.291-295
• /
• 2001

지하탐사 레이더를 이용한 고 건축물의 목재 기등에 대한 비파괴 검사에 응용 가능성을 조사하였다. 실험실에 공동이 존재하는 목재 기둥을 마련하고, 자체 설계 및 제작한 안테나로 구성한 지하탐사 레이더 시스템을 이용하여 기둥 축 방향으로 안테나를 이동시키면서 펄스의 송수신 특성을 측정하였다. 측정에 사용한 펄스와 목재 기둥의 전기적 특성, 안테나, 급전선 등 레이더 시스템 전체를 3차원 FDTD로 모델링하였다. 측정과 동일한 상황에 대한 FDTD 해석결과와 측정자료가 부합됨을 입증하였다. 목재 기둥과 공동간의 낮은 유전율 차이도 쉽게 탐지할 수 있음을 보임으로써 향후 지하탐사 레이더를 고건축물의 비파괴 검사에 효과적으로 응용할 수 있음을 제시하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.224-228
• /
• 2003

In this paper, for phase lock loop(PLL) synthesizer, we introduce a novel but simple and low cost frequency modulation(FM) circuit of a flat peak frequency deviation for modulation signal from high to very low frequency penetrating into the loop-bandwidth of PLL. The FM circuit was basically designed to compensate an amount of feedback of the loop filter in PLL. The circuit also includes the capability of the adjustment of peak frequency deviation and blocking the interference with the loop filter. The designed circuit was successfully implemented and showed the flat frequency deviation as expected in the design.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2000.02a
• /
• pp.109-111
• /
• 2000

A magnetic field sensor is fabricated with superconducting ceramics of Y-Ba-Cu-O system. The prepared material shows the superconductivity at about 95K. The sensor at liquid nitrogen temperature shows the increase in electrical resistance by applying magnetic field. Actually, the voltage drop across the sensor is changed from zero to a value more than 100$\mu$V by the applied magnetic field. The change in electrical resistance depends on magnetic field. The sensitivity of this sensor is 2.9 ohm/T. The sensing limit is about $1.5\times$$10^{-5}$ (=1.5$\times$$10^{-1}$ G). The increase in electrical resistance by the magnetic field is ascribed to a modification of the Josephson junctions due to the penetrating magnetic flux into the superconducting material.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.438-440
• /
• 1995

The impedance characteristics and plasma parameters were experimentally studied in a weakly magnetized planar type, inductively coupled plasma (ICP) system. Compared with non-magnetized for system higher power transfer efficiency, stable impedance matching, enhancement of plasma density and higher electron temperature can be obtained. Such improvements are mainly due to the excitation of deeply penetrating electromagnetic wave and reduction of radial loss of electrons. In particulary, $SF_6$ (sulfur hexafluride) plasma shows unstable impedance matching in non-magnetized ICP because electronegativity of $SF_6$ effects on plasma characteristics. But, magnetized inductively coupled $SF_6$ plasma shows enough impedance matching stability to be applicable to the polysilicon etching in semiconductor process.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.2
• /
• pp.68-73
• /
• 2011

In Ground Penetrating Radar (GPR) for buried object detection, it is important to identify a buried target because removal of an unwanted target requires as much time and effort as does a wanted target. For a simulation of the target identification, the FDTD (Finite Difference Time Domain) and PML (Perfectly Matched Layer) techniques are widely used. Simulation results vary depending on the type of the buried object and the position of the source. As a result, this paper illustrates the range (time) profile of the five types of facilities including PEC (Perfect Electric Conductor) rectangular box and pipes, and shows the comparison of the range profile of the buried facilities.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1658-1667
• /
• 1993

In this research, a numerical algorithm has been developed, which can be applied to the large deformation and large displacement contact problems between two deformable bodies. The contact conditions expressed in terms of the rate of angle change have been proposed considering the change in geometric shape and rate of contact force. A set of linear simultaneous equations is constructed by adding the geometric shape change and contact conditions to the original stiffness matrix. A new method to determine time increment has been proposed based on Euler method, in which the condition to prevent the contact bodies from penetrating and overrunning each other has been taken into consideration. Practical application to contact problem is extrusion in which bodies are sliding along the contact boundary.

• Journal of Acupuncture Research
• /
• v.25 no.6
• /
• pp.153-161
• /
• 2008

Objectives : This study was designed to find out whether normal saline(NS) acupuncture is able to be constituted as an appropriate control group for Cervi Cornu Parvum herbal acupuncture(CC). Methods : NS and CC were injected into Quchi($LI_{11}$) of the subjects. The subjects completed a questionnaire rating the intensity of 21 kinds of acupuncture sensation(hurting, penetrating, sharp, aching, intense, spreading, radiating, tingling, pricking, stinging, pulling, heavy, dull, numb, electric, shocking, hot, burning, cool, pulsing, and throbbing) and side effects. We compared subjective evaluations of acupuncture sensation and side effects between two groups. Results : As for CC most of the acupuncture sensation items were not significantly different from NS especially in less acupuncture-experienced subjects(average 2, below 10 time experiences) rather than more acupuncture-experienced subjects(above 10 time experiences). Conclusions : We found that NS might be an appropriate placebo herbal acupuncture for CC in small amount of acupuncture-experienced subjects. Further study is needed for new placebo herbal acupuncture for CC in more acupuncture-experienced subjects.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.1
• /
• pp.81-84
• /
• 2012

Gunshot wounds are unpredictable and require early, precise diagnosis and treatment. A penetrating gunshot wound can be fatal due to compromised airway, hypovolemic shock, lead poisoning and infection. This case report describes a 48-year-old male patient who had a suicidal gunshot wound on the right temporomandibular joint area using an air rifle. We successfully managed the patient by preoperative embolization, surgical removal of the foreign body and primary closure.