• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.81-87
• /
• 2020

A stable rotational-to-linear motion transformation structure using a driving mechanism with 2 degrees of freedom was developed for an orthogonal mechanism to prevent the interference of each axis in 2D motion. In this mechanism, a step motor was used for precise position control. This structure was developed to maneuver workparts in micro particle blast machining experiments. To determine the real-time performance of micro particle blast machining, the control, input, and output were operated simultaneously and precise position control was implemented, using a timer interrupt with multiple execution codes. The two step motors obtained precise position control by removing backlash with a ball-screw mechanism. The device has menu-type control codes for user-friendliness, and real-time sequence control was simultaneously adopted for user control input.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.55-62
• /
• 2003

This paper investigates the micro-cutting of cemented carbides using PCD (polycrystalline diamond) and PCBN (polycrystalline cubic boron nitride) cutting tools are performed with SEM direct observation method. The purpose of this study is to make clear the cutting mechanism of cemented carbides and the fracture of WC particles at the plastic deformation zone in orthogonal micro-cutting. And also to achieve systematic understanding, the effect of machining parameter on chip formation and machined surface was studied, including cutting speed, depth of cut and various tool rake angle. Summary of the results are shown below. (1) Three type of chip formation process have been proposed by the results of the direct observation in orthogonal micro-cutting of cemented carbide materials. (2) From the whole observation of chip formation, primary WC particles are crushed and/or fine grained in the shearing deformation zone. A part of them are observed to collide directly with a cutting edge of tool by following the micro-cutting. (3) Surface finish, surface morphology and surface integrity is good to obtain by cutting with PCD cutting tool compared with PCBN. (4) The machined surface has the best quality near the low cutting speed of 10${\mu}m$/sec with a cutting depth of 10 ${\mu}m$ using 0$^\circ$ rake angle and 3$^\circ$ flank angle in this condition, but it was found that excessively low speed, for example the extent of 1 ${\mu}m$/sec, is not good enough to select for various reason.

• The Journal of the Petrological Society of Korea
• /
• v.2 no.1
• /
• pp.32-40
• /
• 1993

The light pinkish granite (LPG) and pinkish granite (PG) distributing widely in the Mungyeong-Sangju area are characterized by miarolitic texture of various shape and size. By the joint frequency contour diagram, the joints of orthogonal thpe are recognized in the LPG and PG. From the petrologic textures, joint pattern, and joint spacings, it is recommended that the LPG has more possibility than the PG in recovery ratio of stone. The average physical properties such as specific gravity, absorption ratio (%), porosity (%) and compressive strength (kg/$cm^2$) have been tested 2.6 and 2.6, 0.5 and 0.6, 1.4 and 1.5, 1440 and 1680 for the LPG and PG, respectively. The stones belong to the hard rock, and represent applicable building stone. The thermal conductivity (w/m.k) showing proportional relationships with the absorption ratio and porosity is 2.2~3.2 and suggests massive texture. With increasing of the compressive strength, the ratio of $Fe_2O_3$/($Fe_2O_3$+FeO) show irregular trend and CaO, $Na_2O$ and $K_2O$ have uniformal values without variations. These results suggest there are no matual relationships.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1499-1509
• /
• 2000

In this paper, we propose an efficient channel estimation technique for space-time coded orthogonal frequency-division multiplexing (OFDM) systems with transmitter and receiver diversity. The proposed technique estimates uniquely all channel frequency responses needed in a decoder of space-time coded OFDM systems using "comb-type" raining symbols. The computational complexity of the proposed technique is reduced dramatically, compared with the previous minimum mean-squared error (MMSE) technique, due to the processing is made all in the frequency-domain. Also, several other techniques for mitigating random noise effect and tracking channel variation are discussed to further improve the performance of the proposed approach. The performances of the proposed approach are demonstrated by computer simulation for mobile wireless channels. channels.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.887-896
• /
• 2011

We investigated the effects of a gate dielectric and its solvent on the characteristics of top-gated organic field-effect transistors (OFETs). Despite the rough top surface of the inkjet-printed active features, the charge transport in an OFET is still favorable, with no significant degradation in performance. Moreover, the characteristics of the OFETs showed a strong dependency on the gate dielectrics used and its orthogonal solvents. Poly(3-hexylthiophene) OFETs with a poly(methyl methacrylate) dielectric showed typical p-type OFET characteristics. The selection of gate dielectric and solvent is very important to achieve high-performance organic electronic circuits.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.178-187
• /
• 1995

The method that determines the appropriate damping factor is studied for a lens design. When suitable damping factor is applied to the additive damped least-squares (DLS) method, the convergence and the stability of the optimization process are examined in a triplet-type photographic lens design. We calculate eigenvalues of the product of the Jacobian matrix of error functions by using the singular value decomposition (SVD) method. We adopt the median of eigenvalues as an appropriate damping factor. The convergence and the stability of the optimization process are improved by choosing the adequate damping factor for the optimization of a photographic lens. It is known that the numerical inaccuracy in the calculation of normal equation is overcome by using the orthogonal transformations of the Jacobian matrix. Therefore, a combination of the method for setting a proper damping factor and the orthogonal transformations of the Jacobian matrix is good for application to the design of an aspheric lens with high-order terms. terms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8A
• /
• pp.829-835
• /
• 2002

When finite length image signal is decomposed into M-band synthesized using M-band orthogonal wavelet transform, the boundary signal of image are not reconstructed perfectly. for boundary signals to be reconstructed perfectly, different type filter bank or technique is applied to them when the dimension of analysed is proposed. It can be designed using the singular value decomposition of boundary perfect reconstruction matrix which is obtained from paraunitary matrix which is obtained from paraunitary matrix. And it is also discussed to design the boundary filter bank for improving the coding performance when it is applied to subband coder. The proposed boundary filter bank shows 7% gains in PSNR compared with reflected method.

• ETRI Journal
• /
• v.40 no.6
• /
• pp.699-713
• /
• 2018

Orthogonal frequency division multiplexing (OFDM) has been the overwhelmingly prevalent choice for high-data-rate systems due to its superior advantages compared with other modulation techniques. In contrast, a high peak-to-average-power ratio (PAPR) is considered the fundamental obstacle in OFDM systems since it drives the system to suffer from in-band distortion and out-of-band radiation. The partial transmit sequence (PTS) technique is viewed as one of several strategies that have been suggested to diminish the high PAPR trend. The PTS relies upon dividing an input data sequence into a number of subblocks. Hence, three common types of the subblock segmentation methods have been adopted - interleaving (IL-PTS), adjacent (Ad-PTS), and pseudorandom (PR-PTS). In this study, a new type of subblock division scheme is proposed to improve the PAPR reduction capacity with a low computational complexity. The results indicate that the proposed scheme can enhance the PAPR reduction performance better than the IL-PTS and Ad-PTS schemes. Additionally, the computational complexity of the proposed scheme is lower than that of the PR-PTS and Ad-PTS schemes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.1
• /
• pp.185-201
• /
• 2023

Grant-free random access (GFRA) can reduce the access delay and signaling cost, and satisfy the short transmission packet and strict delay constraints requirement in internet of things (IoT). IoT is a major trend in the future, which is characterized by the variety of applications and devices. However, most existing studies on GFRA only consider a single type of device and omit the effect of access delay. In this paper, we study GFRA in multicell massive multipleinput multiple-output (MIMO) systems where different types of devices with various configurations and requirements co-exist. By introducing the backoff mechanism, each device is randomly activated according to the backoff parameter, and active devices randomly select an orthogonal pilot sequence from a predefined pilot pool. An analytical approximation of the average spectral efficiency for each type of device is derived. Based on it, we obtain the optimal backoff parameter for each type of devices under their delay constraints. It is found that the optimal backoff parameters are closely related to the device number and delay constraint. In general, devices that have larger quantity should have more backoff time before they are allowed to access. However, as the delay constraint become stricter, the required backoff time reduces gradually, and the device with larger quantity may have less backoff time than that with smaller quantity when its delay constraint is extremely strict. When the pilot length is short, the effect of delay constraints mentioned above works more obviously.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.762-769
• /
• 2007

Adaptive MIMO-OFDM (Orthogonal Frequency Division Multiplexing) system adaptively changes modulation scheme depending on feedback channel state information (CSI). The CSI feedback channel which is the reverse link channel has multiple symbol delays including propagation delay, processing delay, frame delay, etc. The unreliable CSI due to feedback delay degrades adaptive modulation system performance. This paper compares the MSE and data capacity with respect to delay and channel signal to noise ratio for the two multi-step channel prediction schemes, CTSBP and BTSBP, such that robust adaptive SISO-OFDM/MIMO-OFDM is designed over severe mobile multipath channel conditions. This paper presents an interpolation method to reduce feedback overhead for adaptive MIMO-OFDM and shows MSE with respect to interpolation interval.