• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.135-142
• /
• 2007

The model to predict flow duration characteristics and performance for small scale hydro power(SSHP) plants is studied to analyze the effects of rainfall condition. One existing SSHP plant was selected and performance characteristics was analyzed by using the developed model. The predicted results from the model developed show that the data were in good agreement with operational results of existing SSHP plant. The results show that both the scale parameter and the shape parameter have large effects on the performance of SSHP sites. And also it was found that the model developed in this study can be a useful tool to predict the performance of SSHP sites.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.4
• /
• pp.493-500
• /
• 2002

The operational data of diesel generator engine is two kinds of data. One is interactive the other is non interactive. We can find the fault information from interactive data measured for every sampling time when the changing rate, direction and status of data are investigated in comparition with those of normal status to diagnose the fault of combustion system. The various data values of combustion system for diesel engine are not proportional to load condition. The criterion to decide the level of data value is not absolute but relative to relational data. This study proposes to compose malfunction diagnosis engine using neural networks to decide that level of data value is out of normal status with the data collected from generator engine of the ship using the commercial data mining tool. This paper investigates the real ship's operational data of diesel generator engine and confirms usefulness of fault detecting through simulations for fault detecting.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.140-145
• /
• 2004

In this paper, we analyzed the operational characteristics of the modified DC reactor type SFCL and derived the design condition of superconducting coil to be operated properly as power source as well as fault current limiter. It was confirmed through the simulation for the operation of this SFCL that the modified DC reactor type SFCL could be operated as both the uninterruptible power supply and the fault current limiter by controlling the duty ratio of GTO thyristor bridge.

• Journal of computational fluids engineering
• /
• v.12 no.3
• /
• pp.1-7
• /
• 2007

In the present study, the wind pressure transients on platform screen door in island platform caused by a passing train are investigated numerically. The transient compressible 3-D full Navier-Stokes solution is obtained with actual operational condition of subway train and the moving mesh technique adopted for the train movement. To achieve more accurate results, detailed shape of train is included in a computational domain and the entrance and exit tunnel of platform are also modeled. Numerical analyses are conducted on three operational conditions of different velocity variation.

• International Journal of Reliability and Applications
• /
• v.17 no.1
• /
• pp.85-105
• /
• 2016

In this paper accelerated life testing is incorporated in quality control technique of acceptance sampling plan to induce early failures in high reliability products.Stress under accelerated condition can be applied in constant-stress, step-stress and progressive-stress or combination of such loadings. A ramp-stress results when stress is increased linearly (from zero) with time. In this paper optimum failure-censored ramp-stress accelerated life test sampling plan for log-logistic distribution has been formulated with cost considerations. The log-logistic distribution has been found appropriate for insulating materials. The optimal plans consist in finding optimum sample size, sample proportion allocated to each stress, and stress rate factor such that producer's and consumer's interests are safeguarded. Variance optimality criterion is used when expected cost per lot is not taken into consideration, and bilevel programming approach is used in cost optimization problems. The methods developed have been illustrated using some numerical examples, and sensitivity analyses carried out in the context of ramp-stress ALTSP based on variable SSP for proportion nonconforming.

• Journal of Environmental Health Sciences
• /
• v.29 no.4
• /
• pp.4-9
• /
• 2003

Biofiltration can effectively remove both organic and inorganic air pollution compounds from both industrial and public sources. However, for the optimal biofiltration performance, it is necessary to gain a better understanding of the inner environment and destruction mechanisms within a biofilter. The effects of operational factors on removal efficiency was studied. Generally, removal efficiency decreases as the loading rate increases. Temperature, as one of the key factors that affect biofiltration design and performance, was also investigated. Conceptually, the biofilter reactor of this paper was divided into five different consecutive stages. The more ethylbenzene COD degraded at each stage, the higher the temperature increases observed compared to the temperatures of the previous stages. It was observed that for every 1 kg of ethylbenzene COD degraded per cubic meter of biofilter media, there was generally a 0.41$^{\circ}C$ increase in the temperature of that stage.

• Journal of Environmental Science International
• /
• v.23 no.1
• /
• pp.97-104
• /
• 2014

The sludge flotation/thickening apparatus equipped a micro-bubble generating pump was used to investigate micro-bubble generating properties on operational parameters. We evaluated micro-bubble generating properties as results to be operated the apparatus by operational parameters which are pump discharge pressure, air/water ratio(A/W ratio), air flow rate, and water flow rate. Micro-bubble generating efficiencies in pumps without recycling flow and with 50% of recycling flow was found to be very efficient on optimum A/W ratio from 1.06 to 3.62% and optimum A/W ratio from 1.05 to 4.06%, respectively. In condition of 3.6% of A/W ratio, we showed that the apparatus could be generated 36,000 ppm of micro-bubble concentration to be optimum treatment efficiency in sludge thickening process.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1756-1758
• /
• 1996

In order to optimize the operational characteristics of single elliptical pulsed Nd:YAG laser designed and fabricator compactly, it is very important to design the resonator shape and the PFN(Pulse Forming Network) suitably. We have been shown that the EMTP(Electro-Magnetic Transient Program) simulation. was used effectively in designing PFN. And Next, we have been compared current pulse width, laser beam profile and damping parameter with laser output energy. In this paper, we have suggested the optimalization of PFN design and the best operational condition.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.4
• /
• pp.278-285
• /
• 2009

Operational modal analysis (OMA) allows modal parameters, such as natural frequencies and damping, to be estimated solely from data collected during operation. However, a main shortcoming of these methods resides in the evaluation of the accuracy of the results. This paper will explore the uncertainty and possible variations in the estimates of modal parameters for different operating conditions. Two algorithms based on the Least Square Complex Exponential (LSCE) method will be used to estimate the modal parameters. The uncertainties will be calculated using a Monte-Carlo approach with the hypothesis of constant modal parameters at a given operating condition. In collaboration with Andritz-Hydro Ltd, data collected on two different stay vanes from an Andritz-Hydro Ltd Francis turbine will be used. This paper will present an overview of the procedure and the results obtained.

• Archives of Reconstructive Microsurgery
• /
• v.17 no.1
• /
• pp.48-50
• /
• 2008

Loupes-assisted microsurgery often needs an operational head lamp for a better condition of light. This may cause serious neck fatigue due to the weight the operational head lamp, the limitation of the operator's head movement from the hind cable, and some cost for purchasing and management of it. On the contrary, a mountain head lamp is very light, full of freedom in movement, applicable to all types of loupes, and relatively very cheap. In conclusion, a mountain head lame can be a cost-effective light source for Loupes-assisted microsurgery.