• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.471-482
• /
• 1995

Bony remodeling pattern of condyle fractures in children are different from in adult for growing of condyle, also might affect treatment and prognosis of the condyle fracture. Subjects of this clinical and radiologic study were 26 temporomandibular joints diagnosed as condyle fracture in 23 patients under 15 years old age. They were treated with conservative method at Dental Hospital of Yonsei University from Jan., 1986 to Oct., 1994. Bony remodeling related with fracture pattern was evaluated. The results obtained are as follows: 1. The ratio of male to female in patients with condyle fracture was 1 : 0.9 and the difference of sex ratio was not noted. Comparing with preschool-age group and school-age group, age frequency was higher in preschool-age group(83％). 2. Fallen down(54％) was the most frequent cause of condyle fractures. Traffic accident and slip down were followed. 3. The most common clinical sign of condyle fractures was tenderness to paipation09 cases). Mouth opening limitation07 cases), swelling(7 cases), malocclusion(3 cases) were next in order. 4. According to sites of condyle fractures, unilateral fractures were in 20 patients and bilateral fractures in 3 patients, therefore total 23 patients-26 cases of condyle fracture were observed. According to fracture distribution, condyle fractures were in 10 patients(44％). Condyle fractures with symphysis fracture(9 patients, 39％), condyle fractures with ascending ramus fracture(2 patients, 9％), condyle fracture with mandibular body fracture(1 patient, 4％), and condyle fractures with mandibular angle fracture(1 patient, 4％) were followed. 5. In displacement pattern of fractured fragment of mandibular condyle, dispiacement(17 cases, 66％) was most common. Dislocation(5 cases, 19％) and deviation (4 cases, 15％) were next in order. 6. During the observation period of fractured condyles, remodeling patterns of fracture sites related with articular fossa were observed with usual condylar shape in 23 cases and with prominently different shape in 3 cases.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2173-2182
• /
• 2020

Control valves are widely used to regulate fluid flux in nuclear power plants, and there are more than 1500 control valves in the primary circuit of one nuclear power plant. With their help, the flux can be regulated to a specific level of water or steam to guarantee the energy efficiency and safety of the nuclear power plant. The flux characteristics of the control valve mainly depend on the valve core shape. In order to analyze the effects of valve core shapes on flux characteristics of control valves, this paper focuses on the valve core shapes. To begin with, numerical models of different valve core shapes are established, and results are compared with the ideal flux characteristics curve for the purpose of validation. Meanwhile, the flow fields corresponding to different valve core shapes are investigated. Moreover, relationships between the valve core opening and the outlet flux under different valve core shapes are carried out. The flux characteristics curve and equation are proposed to predict the outlet flux under different valve core openings. This work can benefit the further research of the flux control and the optimization of the valve core for control valves in nuclear power plants.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1399-1406
• /
• 1988

Flow behaviors of the open channel type flow with its geometric boundary conditions being similar to that of the Multi-Stage-Flash evaporator were studied qualitatively by measuring the velocity distribution. Without a baffle, the flow was in the shape of a simple submerged plane wall jet. At the downstream of this flow, the jet boundary made sharp curve toward the free surface ; this is because the entrainment of the ambient liquid is restricted by the free surface boundary, similar to the Coanda effect. According to the experimental results the level of the free surface appeared to be the most important parameter. The flow with a baffle was in much complicated shape ; especially the recirculating region at the downstream free surface was detected according to the experimental conditions imposed. Inlet liquid velocity, heights of the liquid level and the baffle, and the opening heights of sluice gate of the entrance were the most important parameters in the baffle flow.

• Archives of design research
• /
• v.13
• /
• pp.153-162
• /
• 1996

The residence space has been in the trend of being expanded with the J'l'cent economic growth Therefore PAC may be said to have [wen from business use to home US(: the progressed living standard as the goods ior Uw "ummel' S('dSOn rest'ntly though sold in Uw fast for mainly buslTw"s use. PAC has been in the demand day ;lner day and in the tn'nd on the bc,ing the necessJty of the n'sent wf',lther warming phenomenon This study is the case study nf the products development and design process of PAC which has bpcn llrivcn and developed by Gold Star Co. ,Ltd. Which .is the firm for home electric appliances representing Korea. This studies for the development and the design of the products by the firm thus emphasizing the visulizing it based on this study. For example as they being the goods for the summer season I have tried to know the physical quakity and the characters of koreans by the weather conditions and estimated the demand by setting up the target customers of the PAC as the customers' environment. And I analyzed the acts in the living room in the apartments as the living envinorment which has the direct relation with PAC and also became a help to the moulding work of PAC by analyzing the complete interior image in the living room. In the practical moulding work the Design concept was classified into the envinorment of customer, living and products to drive as the below. Firstly - New shape (Round slim) has been realized which leads the minimizing the moulding space and visul sense of opening as its being spacious. The 2nd - the high class sense of the products which are harmonious with the atmosphere of the living room by making it interiorized has been visible. The 3rd - The shape stimulating the sensitivity of the users and surface treatment are emphasized by making it be touched. The 4th - During inviting use of technology image which appears in the electronics products are attemptedby making it be high quality.king it be high quality.

• Ecology and Resilient Infrastructure
• /
• v.8 no.1
• /
• pp.64-78
• /
• 2021

This study was conducted to find out the effect of the construction and operation of river-crossing structures on the habitat landscape characteristics in the Geum-gang River, South Korea. A total of three study reaches were selected in the downstream of the Daecheong Dam: the Buyong-ri reach, which is a control that is not affected by the construction and operation of the weir of the Four Rivers Project and Sejong-bo Weir reach and Gongju-bo Weir reach of the upper and lower sections of each weir that are affected by the weir construction and operation. The habitat type was classified, and then the structural characteristics of the landscape were analyzed using aerial photographs taken before and after the construction of the Daecheong Dam, before and after the construction of the weir, and before and after the weir gate operation. After the construction of Daecheong Dam in Geum River, the area of the bare land greatly decreased, and the area of grassland and woodland increased in the downstream of the dam. In addition, the patch number in the river landscape increased, the patch size decreased, and the landscape shape index and the habitat diversity increased. Therefore, after the construction of the dam, the bare land habitat was changed to a vegetated habitat, and the habitat was fragmented and diversified in the downstream of the dam. After the construction of the weirs, the area of open water increased by 18% in the Sejong-bo reach and by 90% in the Gongju-bo reach, and the landscape shape index of the open water decreased by 32% in the Sejong-bo reach and by 35% in the Gongju-bo reach, and the habitat diversity index decreased to 25% in the Sejong-bo reach and to 24% in the Gongju-bo reach. Therefore, the open water habitat was expanded, the shape of the habitat was simplified, and the habitat diversity decreased according to the construction of the weirs. After water-gate opening of the weir, the bare land that disappeared after the construction of the weir reappeared, and the landscape shape index and habitat diversity index increased in both terrestrial and open water habitats. Therefore, it was found that the landscape characteristics of the river habitats were restored to the pre-construction of the weir by the operation of the weir gate. The effect of weir gate opening was delayed in the downstream than in the upstream of the weir. Although the characteristics of the landscape structure in the river habitat changed due to the construction of the river-crossing structures, it is thought that proper technology development for the ecological operation of the structures is necessary as the habitat environments can be restored by the operation of these structures.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.322-325
• /
• 2007

Dent resistance is an important characteristic to avoid damage on automotive outer panels. From a practical point of view, dents can be caused in a number of ways. Considering doors as an example, denting can occur from stone impacts or from the careless opening of an adjacently parked vehicle door. Denting can occur where the door surface is smooth and may not have sufficient curvature to resist dent. These exterior body parts are designed to improve dent resistance using a combination of work hardening and bake hardening. In brief, dent is affected by the shape of the parts and the material properties such as yield strength, strain and thickness. In this work, forming of door outer panel is investigated by Taguchi method. Main parameters are yield strength, thickness, blank size, blank holding force and so on. For the given value of design parameters, forming analysis of the thirty six cases are carried out according to L18 orthogonal array. After comparing the performance by simple conversion of simulation results into dent resistance, the final suggestion of the forming parameters is verified for the best improvement of dent resistance.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2546-2551
• /
• 2007

Weather Strip(W/S) is a rubber part to proof water, sound and dust for opening and shutting devices including vehicle doors. And it requires high dimension precision and durability to proof water, noise, vibration and etc. But ironically it itself makes some wind noise because of some protuberance with glasses. The air flow analysis of door part of vehicle makes it possible to calculate and find out the cause of wind noise. In previous analysis, we focus on the numerical air flow analysis of the automobile side part. We do 2D-C.F.D first and 3D second. Through simulations, we can calculate the amount of sound pressure level at the glass run and find out the effects of glass run to make wind noise. Finally we can improve shape of glass run to reduce wind noise although it is small amounts of sound pressure reduction compared with total vehicle noise level.

• Korean Institute of Interior Design Journal
• /
• v.21 no.4
• /
• pp.96-105
• /
• 2012

The fundamental purpose of this study is whether Show Window Display actually affect on purchase and if it does, how much Show Window Display have influence on the buyer's satisfaction. Show windows are most important at clothing stores. The show open types of domestic clothing stores are usually open-type and semi open-type. Show Window Display types of low and middle prices stores are generally opened, horizontal and storied type and the shape, height, opening type and use of ground floor are different by regional distinct features. Generally Show Window Display are consisted by lights, mannequins and directed props. In buying patterns, an impulse buying has more stronger effect than a scheduled buying, a substituted buying and non-buying. An impulse buying are strongly affected by Design and others are prices. The reason why Show Window Display affecting on purchase is the satisfaction of Design and the strong stimulus to purchase(impulse buying), and then Show window Display used by all components strongly has an effect on it. Factors of purchase desires were Design, price and quality in order and factors of purchase motivations were the motivation of clothing design and the motivation of impulse buying. Thus the effects of Show Window Display and factors of purchase motivations are same. As a result of this study, differentiated Show Window Display methods of clothing stores affect the value of goods, the stimulus of purchase and fostering sales effectiveness. Therefore the instruction of Show Window Display methods are indicated by this study.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3225-3232
• /
• 2012

The purposes of this research were to synthesize amoxicillin-carrying magnetic nanoparticles. Magnetic nanoparticles were prepared by a chemical precipitation of ferric and ferrous chloride salts in the presence of a strong basic solution. PLGA and PLGA-PEG copolymers were prepared by ring opening polymerization of lactide (LA) and glycolide (GA) (mole ratio of LA: GA 3:1) with or without polyethylene glycol (PEG). Amoxicillin loaded magnetic PLGA and PLGA-PEG nanoparticles were prepared by an emulsion-evaporation process (o/w). Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) photomicrographs showed that the magnetic nanoparticles have the mean diameter within the range of 65-260 nm also they were almost spherical in shape. Magnetic nanoparticles prepared with PLGA showed more efficient entrapment (90%) as compared with PLGA-PEG (48-52%) nanoparticles. In-vitro release of amoxicillin from magnetic PLGA nanoparticles showed that 78% of drug was released over 24 hours. The amount of amoxicillin released from PLGA-PEG s was higher than PLGA.

• Journal of Surface Science and Engineering
• /
• v.33 no.2
• /
• pp.101-106
• /
• 2000

SOI (Silicon-On-Insulator) substrates were fabricated with varying annealing temperature of $25-660^{\circ}C$ by a linear annealing method, which was modified RTA process using a linear shape heat source. The annealing method was applied to Si ∥ $SiO_2$/Si pair pre-contacted at room temperature after wet cleaning process. The bonding strength of SOI substrates was measured by two methods of Razor-blade crack opening and direct tensile test. The fractured surfaces after direct tensile test were also investigated by the optical microscope as well as $\alpha$-STEP gauge. The interface bonding energy was 1140mJ/m$^2$ at the annealing temperature of $430^{\circ}C$. The fracture strength was about 21MPa at the temperature of $430^{\circ}C$. These mechanical properties were not reported with the conventional furnace annealing or rapid thermal annealing method at the temperature below $500^{\circ}C$. Our results imply that the bonded wafer pair could endure CMP (Chemo-Mechanical Polishing) or Lapping process without debonding, fracture or dopant redistribution.