• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.113-114
• /
• 2006

Vibration of a non-linear system under random excitations was evaluated by probabilistic methods. The non-linear characteristic terms of a system structure were quasi-linearized and excitation terms were remained as they were. An analytical method where the square mean of error was minimized was used. An alternative method was an energy method where the damping energy and restoring energy of the linearized system were equalized to those of the original non-linear system. The numerical results were compared with those obtained by Monte Carlo simulation. The comparison showed the results obtained by Monte Carlo simulation located between those by the analytical method and those by the energy method.

• 응용통계연구
• /
• 제24권5호
• /
• pp.871-881
• /
• 2011

In this paper we propose a logistic regression method to estimate the survival function and the median survival time in interval-censored data. The proposed method is motivated by the data augmentation technique with no sacrifice in augmenting data. In addition, we develop a cross validation criterion to determine the size of data augmentation. We compare the proposed estimator with other existing methods such as the parametric method, the single point imputation method, and the nonparametric maximum likelihood estimator through extensive numerical studies to show that the proposed estimator performs better than others in the sense of the mean squared error. An illustrative example based on a real data set is given.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1232-1241
• /
• 2012

The ac side current of an high voltage direct current (HVDC) converter is characterized by highly non-sinusoidal waveform. If the harmonic current is allowed to flow in the connected ac system, it may cause unacceptable levels of distortion. Therefore, ac side filters are required as part of the total HVDC converter station, in order to reduce the harmonic distortion of the ac side current and voltage to acceptably low levels. The ac side filters are also employed to compensate network requested reactive power because HVDC converters also consume substantial reactive power. Among different types of filters, double-tuned filters have been widely utilized for HVDC system. This paper presents two design methods of double-tuned filter; equivalent method and parametric method. Using a parametric method, in particular the paper proposes a new design algorithm for a realistic system. Finally, the performance of the design algorithm is evaluated for a 80kV HVDC system in Jeju island with PSCAD/EMTDC program. The results cleary demonstrate the effectiveness of proposed design method in harmonics elimination and steady-state stability.

• 한국음향학회지
• /
• 제40권5호
• /
• pp.452-459
• /
• 2021

서로 떨어져 설치된 두 개의 음향 수신기에 도달하는 신호의 상호 지연 시간을 추정하는 것은 실내 음향과 소나 등에서 목표물 위치 추정 문제나 추적 등 여러 방면에서 쓰이고 있다. 시간 지연을 구하는 방법에서는 두 수신 신호 사이의 상호 상관을 이용한 방법으로 대표되는 비 파라메트릭 방법과 시스템 인식을 기반으로 하는 파라메트릭 방법이 있다. 본 논문에서는 파라메트릭 방법에 기반을 둔 시간 지연 추정 방법을 제안한다. 특히 음향 수신기에 잡음이 부과되는 것을 고려한 방법을 제안한다. 그리고 백색 잡음 및 잔향 환경에서 기존의 일반 상호 상관법과 적응 고유치 분석법과 비교를 통해서 새로 제안한 알고리즘이 더 우수함을 확인한다.

• 한국습지학회지
• /
• 제20권2호
• /
• pp.105-115
• /
• 2018

수문기상자료의 빈도해석은 풍수해에 따른 대응 및 시설물의 설계기준에 있어 중요한 요소 중 하나이다. 일반적으로 수문기상자료에 대한 빈도해석의 경우 관측자료는 통계적으로 정상성을 가진다고 가정하고, 확률분포의 매개변수를 고려하는 매개변수적 방법을 적용하고 있다. 이러한, 매개변수적 빈도해석을 위해서는 신뢰성 있는 충분한 자료의 수집이 필요하지만, 강수량과 다르게 적설량의 경우 계절적 특성과 함께 최근에는 기후변화로 인한 적설량 관측일수 및 평균 최심신적설량이 감소하기 때문에 부족한 자료에 대한 문제점을 보완할 필요가 있다. 이에 본 연구에서는 매개변수 빈도해석 방법과 부족한 자료의 문제점을 보완할 수 있는 표본 재추출 기법인 Bootstrap방법과 SIR(Sampling Importance Resampling)알고리즘을 적용하여 적설량의 빈도해석을 실시하였다. 58개 기상관측소에 대해 재추출된 일 최대 최심신적설량 자료를 이용한 비매개변수적 빈도해석을 통해 확률적설량을 산정하고 이를 비교 분석하였다. 빈도별 확률적설량의 증감률을 검토한 결과 매개변수적 빈도해석과 비매개변수적 빈도해석에서 증감률을 나타내는 지점들이 대부분 일치하는 것으로 나타났다. 확률적설량은 관측 자료와 Bootstrap방법에서 -19.2%~3.9%, Bootstrap방법과 SIR알고리즘에서 -7.7%~137.8% 정도의 차이를 보였다. 표본 재추출 기법은 관측표본이 적은 적설량의 빈도해석 및 불확실성 범위의 제시가 가능함을 확인할 수 있었고, 이는 여름철 태풍과 같이 계절적 특성을 지닌 다른 자연재난의 해석에도 적용될 수 있을 것으로 판단된다.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.347-354
• /
• 1999

Statistical Process Control(SPC) which uses control charts is widely used to inspect and improve manufacturing process as a effective method. A parametric method is the most common in statistical process control. Shewhart chart was made under the assumption that measurements are independent and normal distribution. In practice, this assumption is often excluded, for example, in case of (equation omitted) chart, when the subgroup sample is small or correlation, it happens that measured data have bias or rejection of the normality test. A bootstrap method can be used in such a situation, which is calculated by resampling procedure without pre-distribution assumption. In this study, applying bootstrap percentile method to (equation omitted) chart, it is compared and evaluated standard process control limit with bootstrap percentile control limit. Also, under the normal and non-normal distributions, where parameter is 0.5, using computer simulation, it is compared standard parametric with bootstrap method which is used to decide process control limits in process quality.

• 한국임상수의학회지
• /
• 제27권1호
• /
• pp.66-70
• /
• 2010

Reference interval is critical for interpreting laboratory results, monitoring response to therapy and predicting the prognosis of the patients in clinical settings. The aim of the present study was to update established reference intervals for routine hematologic and serum chemistry values for a population of clinically healthy dogs (range, 1-8 years) seen in an animal hospital. Blood was obtained by venipuncture while animals were physically restrained, and samples were analyzed for 9 chemistries on MS9-5H (Melot Schloesing Lab, France) and 6 hematology on Vet Test 8008 (IDEXX, USA). Data from 105 dogs (52 males and 53 females) for hematology and 113 dogs (37 males and 76 females) for chemistry were used to determine reference intervals using the parametric, nonparametric and bootstrap methods. Prior to analysis, all parameters were tested for normal distribution using Anderson-Darling criterion. Of the 9 biochemical analytes, alkaline phosphatase, alanine aminotransferase, aspartate aminotransferase, creatinine, total protein, and glucose concentrations did not fit normal distribution for both original and transformed data. All but eosinophil count satisfied normal distribution for either original or transformed data. Parametric method can be used for original cholesterol concentrations, RBC, WBC, and neutrophil counts. This technique can also be used for power-transformed values of blood urea nitrogen concentrations and for logarithm of lymphocyte and monocyte counts. Non-parametric or bootstrap method was the preferred choice for the remaining 7 biochemical parameters and eosinophil count as they did not follow normal distributions. All three statistical techniques performed in similar reference intervals. When establishing reference intervals for clinical laboratory data, it is essential to assess the distribution of the original data to increase the accuracy of the interval, and non-parametric or bootstrap methods are of alternative for the data that do not fit normal distribution.

• 응용통계연구
• /
• 제27권3호
• /
• pp.461-473
• /
• 2014

꼬리가 두꺼운 분포의 고분위수에 대한 신뢰구간을 연구하였다. 통계량의 극한 분포에 근거한 점근적 방법과 붓스트랩 방법을 같이 고려하였다. 이 두 방법에 모수적, 비모수적, 준모수적 기법을 각각 적용할 수 있는데, 전체 11가지 신뢰구간의 성능을 실제신뢰수준과 길이로 비교하였다. 모의실험 결과 준모수적이면서 점근적인 신뢰구간과 축량을 이용하는 준모수적 붓스트랩 신뢰구간이 실제신뢰수준의 기준에서 안정된 성능을 보인다는 것을 알 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권10호
• /
• pp.5179-5196
• /
• 2019

To explore an effective non-invasion medical imaging diagnostics approach for hepatocellular carcinoma (HCC), we propose a method based on adopting the multiple technologies with the multi-parametric data fusion, transfer learning, and multi-scale deep feature extraction. Firstly, to make full use of complementary and enhancing the contribution of different modalities viz. multi-parametric MRI images in the lesion diagnosis, we propose a data-level fusion strategy. Secondly, based on the fusion data as the input, the multi-scale residual neural network with SPP (Spatial Pyramid Pooling) is utilized for the discriminative feature representation learning. Thirdly, to mitigate the impact of the lack of training samples, we do the pre-training of the proposed multi-scale residual neural network model on the natural image dataset and the fine-tuning with the chosen multi-parametric MRI images as complementary data. The comparative experiment results on the dataset from the clinical cases show that our proposed approach by employing the multiple strategies achieves the highest accuracy of 0.847±0.023 in the classification problem on the HCC differentiation. In the problem of discriminating the HCC lesion from the non-tumor area, we achieve a good performance with accuracy, sensitivity, specificity and AUC (area under the ROC curve) being 0.981±0.002, 0.981±0.002, 0.991±0.007 and 0.999±0.0008, respectively.

• 대한산업공학회지
• /
• 제41권4호
• /
• pp.408-413
• /
• 2015

The quality prediction of the semiconductor industry has been widely recognized as important and critical for quality improvement and productivity enhancement. The main objective of this paper is to predict the final quality of semiconductor chips based on fail bit count information obtained from probe tests. Our proposed method consists of solving the data imbalance problem, non-parametric variable selection, and adjusting the parameters of the model. We demonstrate the usefulness and applicability of the proposed procedure using a real data from a semiconductor manufacturing.