• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.757-762
• /
• 2006

The method of promoing sound surroundings with the new concept named 'Soundscape' attracts the public attention. This new method is the way of active promoting acoustic surroundings to offer the vitality, comfort and identity of urban space and relative quietness by masking the noise with natural and signal sounds. Therefore, this research has the purpose of finding out the method of soundscape concept of urban public space for the comfort acoustic surroundings.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.682-686
• /
• 2002

It is increasing the interest on the comfortable dwelling environment, while sound Insulation performance of materials and elements used in building is falling down as they become thicker and lighter. Therefore, sound insulation performance in building has become the most important factor determining the level of housing, especially for apartment that has common wall and floor with next neighbors. This paper aims to experiment the sound insulation characteristics of floor coverings as their types and to analyse their noise reduction effect.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.12
• /
• pp.649-654
• /
• 2003

The simplest method for measuring output currents of the three phase inverters is to measure them with three current sensors such as hall sensors. This method requires at least two current sensors, and these types of sensors are somewhat expensive. More economical method is measuring DC link current with a simple shunt resistor, then, reconstructing output current using the DC link current value and the switching status. However, in low speed region, the measurement becomes difficult and even impossible due to the requirement of minimum switching duration for A/D conversion. These problems can be overcome by limitation of switching duration. Limitation of switching, however, causes voltage and current distortion. Owing to compensation, distortion can be effectively suppressed. However these increase acoustic noise due to increment of current ripple. In this paper, a current measurement method is proposed, which can reduce minimum switching duration resulting in reduction of acoustic noise. The validity of proposed method is confirmed through experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.3
• /
• pp.78-84
• /
• 1994

The location of periodic noises in phase of AC power wave reveals to be specific according to the noise kinds which can be generally classified into modulation and baseband types in DLC. The former noise type has constant noise phase which is originated from switching mode power supplies and the latter normally caused from thyristor circuit of low switching frequency is compared to be more dispersive than the other.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.73-78
• /
• 2001

Main sources of the vibration of a gear-pair system are backlash and transmission error. This paper investigates the dynamics of a gear-pair system involving backlash and transmission error. This paper presented 4 types of gear motions due to the existence of a backlash. The solutions are calculated using a multiple-time scale method and numerically. The results shows the existence of 4 type motions, jump phenomenon, and chaotic motion consequently the design of gear driving system with low vibration and noise requires the study on the effects of transmission error and backlash, i.e. nonlinearities in gear driving system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.274-279
• /
• 2000

Driving of the engine makes unbalance forces which induces vibration to the engine mount system. Active vibration control must be performed to reduce the vibration and the propagation of structure-born sound. In this study, the engine system is modeled as 3-dim. vibration system including flexible structures and an effective active noise control method is proposed. Also, appropriate actuator and sensor locations and types are selected. The miniature of the engine vibration system with multi-input multi-output is built and an active vibration control with multiple filtered-X LMS algorithm is applied to it. The applied control method was effective to reduce the transmitted vibration power through the rubber mount It showed the feasibility of the control of the engine vibration systems with flexible structures.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1350-1354
• /
• 2000

철도 소음에 의한 환경문제가 증가하고 있으나 방음대책으로는 아직까지 방음벽을 철도 연변에 설치하는 것인데 이러한 방음벽은 주위 경관과의 부조화와 열차승객의 시아방해 등으로 높이에 제한을 받는다. 높이를 높이지 않고도 저감효과를 얻을 수 있는 방음벽과 상단형상의 개발이 중요한 연구과제로 대두되고 있다. 본 논문에서는 철도연변에 설치되는 방음벽의 종류별로 삽입손실을 ISO 10847에 근거하여 측정하였으며 그 결과를 상호 비교 분석 평가하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1833-1840
• /
• 1993

An efficient vibration analysis method, Component Mode Synthesis(CMS), for an exhaust system with bellows is presented. Analyses are performed for two types of bellows, where characteristics of vibration modes affecting idle shake and interior noise of a vehicle are examined. Also analyzed are the contributions of an exhaust and engine mounting system to the idle shake and interios noise. Comparison between the analysis and test is in good agreement, hence the CMS method is shown to be efficient and valid.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.5 s.98
• /
• pp.519-526
• /
• 2005

Recently, the interest on the comfortable dwelling environment is increasing and the effort to solve the problem of exterior noise was tried. The propose of this study is to suggest the design of balcony window in apartment and to evaluate the sound insulation of it. So, we designed five types of balcony window which were considered not only sound insulation but ventilation. The sound reduction index of window was evaluated by the measurement in mock-up room. The results showed that case 2 improved about 6 dB in the weighted apparent sound reduction index than case 1, and case 3 reduced about $39 \%$ in construction cost than case 4.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.35-39
• /
• 2009

Recently, the flat-plate structure is widely used because it has many advantages such as reduction of story height, long span etc than the RC rahmen structure. Furthermore, application of the flat-plate is on the increase because of flexible plan unlike wall structure. Long span have been at a disadvantage for vibration serviceability evaluation, however studies about vertical direction vibration of flat-plate structure has not been carried out. This study analysis the characteristics according to slab structure to make an experiment on vibration and floor impact noise for the flat-plate structure in construction performance laboratory in Kolon E&C R&D center, the flat-plate structure applied to the post-tension method, and the wall structure in apartment houses.