• The Journal of Information Systems
• /
• v.19 no.3
• /
• pp.209-236
• /
• 2010

Recently, utilization of mobile Internet services is rapidly increasing. To properly accelerate the vitalization of mobile Internet usage, we have to know exactly about the factors affecting potential users' value recognition and intention to use. Technology acceptance model (TAM) is one of the most powerful reference framework for the individual user's adoption of IT innovations. This research borrowed core concept of TAM, and tried to explain users' intention to use mobile Internet by understanding the direct and indirect effects of subjective norm and perceived usefulness. To increase the explanatory power of the model, this paper introduced personal innovativeness as a key moderator variable. The research findings include; i) subjective norm has strong positive influence on perceived usefulness and intention to use, ii) perceived usefulness has positive influence on intention to use, iii) the influence of subject norm is greater than that of perceived usefulness, iv) positive influence of subjective norm on the perceived usefulness and intention to use are significantly stronger in the case of low personal innovativeness sub-group than the case of high personal innovativeness sub-group, and v) high personal innovativeness sub-group have shown strongly positive influence of perceived usefulness on the intention to use while there is no such significant relationship in the case of low personal innovativeness sub-group. Based on these findings, this paper proposed several guidelines to increase the adoption and the usage of mobile Internet; i) word-of-mouth is extremely important, ii) to form a good word-of-mouth, it will be very important to make early adopters and heavy users have positive direct experiences of using mobile Internet.

• Journal of Korea Game Society
• /
• v.15 no.1
• /
• pp.171-184
• /
• 2015

Looking at the existing game-related research, innumerable researches such as game acceptance, user satisfaction, continuance intention, wold-of-mouse intention have been carried out. However, there was no cases that applying the concept of service recovery in game researches. The purpose of this study is to evaluate the impact on the characteristic of the mobile social network game that based on domestic mobile social network game platform which focusing on KakaoTalk games on the service recovery. In addition, the study analyzed the characteristic factors of mobile social network game on the basis of Organizational Equity Theory and Innovation Diffusion Theory to identified the causal relationship between those factors and service recovery. As a result, except the independent variable-compatibility, all of the characteristics factors of mobile social network game showed direct or indirect effects on service recovery. The results of this study are expected as a reference for presenting a new business model, reducing risk factors and enriching the related research of the gaming industry.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.79-86
• /
• 2018

In this study, emulsion type hydrophobic admixture was prepared by mixing polyvinyl alcohol surfactant, polymethyl hydro-siloxane and meta kaolin, and the compressive strength and mechanical properties such as permeability and contact angle test of the mortar were evaluated. The developed hydrophobic admixture showed no decrease in strength and the mortar specimen with magnesium oxide developed the early strength. In the case of permeability, total seepage was significantly decreased when the hydrophobic admixture was directly mixed with the mortar, but the effect of meta kaolin contained in hydrophobic admixture was not significant. The surface of specimens coated with hydrophobic admixture shows that the contact angle on the surface was highly increased compared with reference mortar specimen. Further researches to obtain the optimum mix proportion of the PVA fiber, nano-silica and meta kaolin for producing the super-hydrophobic surface are required.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.125-130
• /
• 2016

PURPOSE. The purpose of this study was to determine the effect of changes in the horizontal plane angle on the mesiodistal width ratios of the maxillary anterior teeth during the acquisition of frontal view photographs, derive these ratios for Korean adults on the basis of the data obtained, and analyze them using the Golden Proportion as a reference. MATERIALS AND METHODS. In experiment I, 30 plaster casts were mounted on an articulator and positioned on the angle-measuring device with a center setting of $0^{\circ}$. The device was rotated to $10^{\circ}$ in $1^{\circ}$ increments in a counterclockwise direction. At each angle, photographs were obtained and analyzed. Experiment II was based on 60 patients who visited the Department of Prosthodontics at Kyungpook National University Dental Hospital from February 2012 to February 2015. The patients were divided into three groups [Male (M), Female (F), Total (M + F)]. Frontal views were obtained for all groups and analyzed. RESULTS. From $1^{\circ}$ to $10^{\circ}$, the relative mesiodistal width ratios for the maxillary anterior teeth showed no significant differences from those at $0^{\circ}$. In all three groups, the relative width ratio of the maxillary central incisor was smaller than that specified in the Golden Proportion; the opposite was true for the canine. CONCLUSION. Our results suggest that the mesiodistal width ratios of the maxillary anterior teeth do not follow the Golden Proportion in Korean adults, and that a change in the horizontal plane angle from $1^{\circ}$ to $10^{\circ}$ during frontal photography does not affect these ratios.

• Journal of Technologic Dentistry
• /
• v.3 no.1
• /
• pp.9-16
• /
• 1981

A comparative study was conducted to evaluate the relationship of investing medium to the amount of vertical occlusal changes and to the differences of surface smoothness during denture construction. Three groups of 20 dentures, 30 sets of upper and lower were fabricated of conventional heatcuring acrylic denture base resin, using silicone-gypsum molding techniques, with or without covering the occlusal surfaces of the teeth by artificial stone and all-gypsum molding techniques. The distance between the two reference points indented by 1/2 round bur on the upper and lower frontal surfaces of each articulator were measured and recorded before processing and again after processing and remounting of each denture on the articulator. The differences between the two recordings indicated the amount of vertical opening during denture processing. The difference of surface smoothness were investigated and determined by 3 observers continual comparing of the two randomly selected dentures with each other, which were seperately selected as pairs from the different two groups of 20. The results obtained were as follows: 1. During resin processing no statistically significant differences of the amount of vertical occlusal changes were detected between any of the two groups of two silicone-gypsum and one allgypsum molding techniques, although the amount of vertical opening was somewhat increased when silicone-gypsum molding technique was used. 2. Surface smoothness of the processed denture was makedly by increased when silicone-gypsum molding technique was used.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.372-378
• /
• 2007

This paper presents an improvement of field uniformity in a reverberation chamber with QRDs(Quadratic Residue Diffuser) and also shows the optimal dimension of the QRDs. The QRD is designed for $1{\sim}3\;GHz$ frequency band and the FDTD(finite-Difference Time-Domain) method is used to analyze the field characteristics. At 2 GHz, the standard deviation of test volume in the reverberation chamber is the smallest when the QRD has $30{\sim}60\;%$ coverage of one side of the reverberation chamber and the field uniformity is worsened when the coverage of the QRD is either below 20 % or above 70 % of the area of the side wall. Particularly, the standard deviation of test volume in the reverberation chamber with 30 % coverage of QRD is improved by 1.53 dB compared to that of the reference chamber with no QRDs.

• Journal of Environmental Health Sciences
• /
• v.44 no.2
• /
• pp.153-159
• /
• 2018

Objectives: This study was carried out to determine $LD_{50}$ of benzo[a]pyrene to decide the possibility to designate them as toxic substance on the Act on the Registration and Evaluation, etc. of Chemical Substances, and to suggest that they should be managed in what level on the Chemical Control Act. Methods: Based on the result of a preliminary study, 300 mg/kg was set as the middle dose. A highest dose of 2,000 mg/kg and a lowest dose of 50 mg/kg were selected based on the OECD TG 423. Benzo[a]pyrene was orally administered once to female and male SD rats at dose levels of 50, 300, 2,000 mg/kg (body weight). All animals were monitored daily for clinical signs and mortality over 14 days. Also testicular spermatid count, motility and etc. were examined as well. Results: Under the condition of this experiment, $LD_{50}$ of benzo[a]pyrene was assumed to be >2,000 mg/kg. In the lesion according to autopsy, there were no specific symptoms in the control and experimental groups. At 2,000 mg/kg, a decrease in the sperm motility was observed. Benzo[a]pyrene should be designated to be toxic substance as the material assumed to be reproduction-toxicity on the Act on the Registration and Evaluation, etc. of Chemicals. Therefore we should abide by legal procedures determined by Chemicals Control Act in treating it. Conclusion: Considering the significant result that sperm motility in the experimental group was inferior to that in the reference group, we suggest that benzo[a]pyrene be designated as a toxic substance.

• Journal of Environmental Health Sciences
• /
• v.44 no.2
• /
• pp.160-168
• /
• 2018

Objectives: The purposes of the study were to investigate hazardous pollutant emissions changes among group 1 carcinogens. The emissions characteristics were compared with national cancer registration statistics. Methods: A survey of group 1 carcinogen hazardous pollutant emissions (trichloroethylene, benzene, vinyl chloride, formaldehyde, 1,3-butadiene, ethylene oxide, chromium and its compounds, 3,3'-dichloro-4,4-diaminodiphenylmethane, chloromethyl methyl ether, arsenic and its compounds, cadmium and its compounds, o-toluidine) was conducted through a homepage for 2001-2015. The emission of hazardous chemicals and the cancer trend analysis for 2001-2015 were performed using the Korean statistical information service through its homepage as a reference. Results: Emissions of more than 95% of the substances listed as group 1 carcinogens over the last five years were made up of trichloroethylene, benzene, vinyl chloride, formaldehyde, 1,3-butadiene, and ethylene oxide. As a result of the comparison of emission results and cancer incidence rates, carcinogen pollutant emissions showed a tendency to decrease continuously. In addition, the incidence of cancer tended to increase, but showed a tendency to decrease from 2012. Conclusion: The results indicate hazardous pollutant emissions have continued to increase. However, no association between emissions and health effects was shown and more research is needed.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.61-72
• /
• 2011

Management performance of a construction company can be the sum of management performance of each different project. Therefore, the measurement of management performance following construction projects is essential for securing the competitiveness of a company. However, most research has been related to the performance measurement of the construction industry and companies and little has been conducted on individual project's performance. In particular, building projects have various characteristics depending on construction orderer, type and commissioning entity but no performance indicators have been selected based on this classification. This study aims to select performance indicators for subdivided areas based on project characteristics as well as those which can be commonly used to measure management performance at construction and trial run stages of building projects. In the future, those indicators proposed in this study can be used for developing methodology to evaluate them and later applied to actual building projects to generate quantitative data. In addition, they are expected to be used as reference for selecting indicators to measure management performance of plant and civil engineering projects.

• Progress in Medical Physics
• /
• v.28 no.3
• /
• pp.111-121
• /
• 2017

Verification of dose distribution is an essential part of ensuring the treatment planning system's (TPS) calculated dose will achieve the desired outcome in radiation therapy. Each measurement have uncertainty associated with it. It is desirable to reduce the measurement uncertainty. A best approach is to reduce the uncertainty associated with each step of the process to keep the total uncertainty under acceptable limits. Point dose patient specific quality assurance (QA) is recommended by American Association of Medical Physicists (AAPM) and European Society for Radiotherapy and Oncology (ESTRO) for all the complex radiation therapy treatment techniques. Relative and absolute point dose measurement methods are used to verify the TPS computed dose. Relative and absolute point dose measurement techniques have a number of steps to measure the point dose which includes chamber cross calibration, electrometer reading, chamber calibration coefficient, beam quality correction factor, reference conditions, influences quantities, machine stability, nominal calibration factor (for relative method) and absolute dose calibration of machine. Keeping these parameters in mind, the estimated relative percentage uncertainty associated with the absolute point dose measurement is 2.1% (k=1). On the other hand, the relative percentage uncertainty associated with the relative point dose verification method is estimated to 1.0% (k=1). To compare both point dose measurement methods, 13 head and neck (H&N) IMRT patients were selected. A point dose for each patient was measured with both methods. The average percentage difference between TPS computed dose and measured absolute relative point dose was 1.4% and 1% respectively. The results of this comparative study show that while choosing the relative or absolute point dose measurement technique, both techniques can produce similar results for H&N IMRT treatment plans. There is no statistically significant difference between both point dose verification methods based upon the t-test for comparing two means.