• Journal of Adhesion and Interface
• /
• v.11 no.4
• /
• pp.174-180
• /
• 2010

The effect of carbon nanotube surface treatment on the interface and thermal conductivity of carbon nanotube-based poly(methylmethacrylate) (PMMA) composites was investigated. Coagulation and atomic-transfer radical polymerization (ATRP) was applied to modify the surface of multi-wall carbon nano-tube. The composite of ATRP method used carbon nanotube showed the higher transparency and thermal conductivities than that of the coagulation method used. In comparison to the thermal conductivity of pure PMMA, 0.21 W/mK, the ATRP carbon nanotube used PMMA/MWNT composite showed a thermal conductivity of 0.38 W/mK. The interface between carbon nanotube and PMMA was observed by scanning electron microscope and uniform dispersion of carbon nanotube was observed without any void in the PMMA matrix. It may be beneficial to transport the phonon without any scattering and it may result in a higher thermal conductivity.

• Archives of design research
• /
• v.13 no.3
• /
• pp.181-190
• /
• 2000

As human-centered design has become new paradigm in the whole field of design, they make an effort to understand users in the field of graphic interface design. However, there are not much of study to systematic process for human-centered approach in graphic interface design. Therefore, in this paper, the study was conducted to develop application methodology of prototype in the graphic user interface design process. The study consists of three sections. first, definition, types and application methods are introduced by secondary research. Second, all the knowledge gathered above by secondary research are integrated in the newly proposed Prototype-based interface design process. There are many types of prototype from idea sketches on the paper to final working prototype realized by computer. It is needed to develop and test appropriate prototype with appropriate techniques by objectives of the stages. Finally, the proposed prototype-base design process is verified and exemplified through the process of using prototype in the development of multi-user educational multimedia product.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.4
• /
• pp.420-430
• /
• 2003

This paper presents an immersive multimodal Gumdo simulation game that allows a user to experience the whole body interaction with an intelligent cyber fencer. The proposed system consists of three modules: (i) a nondistracting multimodal interface with 3D vision and speech (ii) an intelligent cyber fencer and (iii) an immersive feedback by a big screen and sound. First, the multimodal Interface with 3D vision and speech allows a user to move around and to shout without distracting the user. Second, an intelligent cyber fencer provides the user with intelligent interactions by perception and reaction modules that are created by the analysis of real Gumdo game. Finally, an immersive audio-visual feedback by a big screen and sound effects helps a user experience an immersive interaction. The proposed system thus provides the user with an immersive Gumdo experience with the whole body movement. The suggested system can be applied to various applications such as education, exercise, art performance, etc.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.401-409
• /
• 2012

Ultrasonic testing are far superior to other nondestructive tests for detecting the disbond interface which occurred in adhesive interface. However, a solid rocket motor consisting of a steel case, rubber insulation, liner, and propellant poses many difficulties for analyzing ultrasonic waves because of the superposition of reflected waves and large differences in acoustic impedance of various materials. Therefore, ultrasonic tests for detecting the disbond interface in solid rocket motor have been applied in very limited areas between the steel case and rubber insulation using an automatic C-scan system. The existing ultrasonic test cannot detect the disbond interface between the liner and propellant of a solid rocket motor because most of the ultrasonic waves are absorbed in the rubber material which has low acoustic impedance. This problem could be overcome by analyzing the resonance frequency from the frequency spectrum using the ultrasonic resonance method. In this paper, a new technique to detect the disbond interface between the liner and propellant using ultrasonic resonance characteristics is discussed in detail.

• Journal of Broadcast Engineering
• /
• v.24 no.2
• /
• pp.341-352
• /
• 2019

The inconvenience of using the product weakens the competitiveness of the product and makes it difficult to obtain various users. This study proposes a 5-step evaluation method that is derived from a formal usability evaluation to suggest improvement directions for easier and more convenient manipulation of complex or inconvenient user interface. The 5-step usability evaluation method can not be applied to all broadcasting equipments, but it is expected to improve the user interface of broadcasting equipments. In addition, it is expected to provide an opportunity to more flexible access to user interface development to be applied to new application services in a variety of telecommunication convergence equipment industry, while leading the era of convergence of broadcasting industry throughout broadcasting equipment industry.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.365-368
• /
• 2002

We investigated the influence of RTP annealing of multi-layered metal films deposited on oxides layer. Two types of oxides, BPSG and P-7205, were used as a bottom layer under multi-layered metal film. The bonding was not good in metal/BPSG/Si samples because adhesion between metal layer and BPSG oxide layer was poor by interfacial reaction during RTP annealing above 650$^{\circ}C$. On the other hand bonding was always good in metal/ P-TEOS /Si samples regardless of annealing temperature. We observed the interface between oxide and metal layers using AES and TEM. The phosphorus and oxygen profile in interface between metal and oxide layers were different in metal/BPSG/Si and metal/P-TEOS/Si samples. We have known that the properties of interface was improved in metal/BPSG/Si samples when the sample was annealed below 650$^{\circ}C$.

• Computers and Concrete
• /
• v.15 no.5
• /
• pp.735-758
• /
• 2015

This work deals with unilateral effect of quasi-brittle materials, such as concrete. For this propose, a two-dimensional meso-scale model is presented. The material is considered as a three-phase material consisting of interface zone, matrix and inclusions - each constituent modeled by an appropriate constitutive model. The Representative Volume Element (RVE) consists of inclusions idealized as circular shapes randomly placed into the specimen. The interface zone is modeled by means of cohesive contact finite elements developed here in order to capture the effects of phase debonding and interface crack closure/opening. As an initial approximation, the inclusion is modeled as linear elastic as well as the matrix. Our main goal here is to show a computational homogenization-based approach as an alternative to complex macroscopic constitutive models for the mechanical behavior of the quasi-brittle materials using a finite element procedure within a purely kinematical multi-scale framework. A set of numerical examples, involving the microcracking processes, is provided. It illustrates the performance of the proposed model. In summary, the proposed homogenization-based model is found to be a suitable tool for the identification of macroscopic mechanical behavior of quasi-brittle materials dealing with unilateral effect.

• Structural Engineering and Mechanics
• /
• v.72 no.5
• /
• pp.557-568
• /
• 2019

Accurate modeling of contact interface in bolted joints is crucial in predicting the dynamic behavior for bolted assemblies under external load. This paper presents a contact pressure distribution based non-uniform virtual material method to describe the joint interface of assembly structure, which is connected by sparsely distributed multi-bolts. Firstly, the contact pressure distribution of bolted joints is obtained by the nonlinear static analysis in the finite element software ANSYS. The contact surface around bolt hole is divided into several sub-layers, and contact pressure in each sub-layer is thought to be evenly. Then, considering multi-asperity contact at the micro perspective, the relationship between contact pressure and interfacial virtual material parameters for each sub-layer is established by using the fractal contact theory. Finally, an experimental platform for the dynamic characteristics testing of a beam lap structure with double-bolted joint is constructed to validate the efficiency of proposed method. It is found that the theoretical results are in good agreement with experimental results by impact response in both time- and frequency-domain, and the relative errors of the first four natural frequencies are less than 1%. Furthermore, the presented model is used to examine the effect of rough contact surface on dynamic characteristics of bolted joint.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.280-283
• /
• 2000

Users of computer interfaced with the LAN use the same printer with time sharing. Alternatively, Hey use the multi-user printer interface to print in the office which can't have LAN system due to the great expenses. Otherwise they have to connect directly moving the printer to computer. In this papaer, we present a new printer interface equipment which can interface a printer and multi computers through wireless using the radio frequency of about 430MHz. The tranceivers of the equipment consist of two part: one part is installed in parallel port of computer and other part is installed in Centronix port of printer. Their maximum data rate is 9600bps and the communication area is about 50 meters in best case.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.273-278
• /
• 2012

In this contribution, we design and implement an SPI hardware interface for the microprocessor to communicate with the MMC (Multi-Media Card) in an embedded system. Proposed architecture is compatible with the APB in AMBA bus architecture. Embedding OS in an embedded system means a big burden in terms of hardware and software ending up with performance decline. In this paper, we adopt the concept of SPI communication without using OS in the embedded system and implement in a form of FPGA chip. The designed SPI module was automatically synthesized, placed, and routed. Implementation was performed through the Altera FPGA and well operated at 25MHz clock frequency, which satisfied our target speed.