• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.640-649
• /
• 2010

Coarse granular materials such as gravel and crushed stone have been used as an important fill materials to large soil structure of railway, road, dam and so on. Although much studies for general soil materials have been carried out domestically, the studies for coarse materials were insufficient. Particularly, it is the level in which the study for dynamic properties(Elastic modulus and damping ratio) of coarse materials, applies the foreign country literature. This is due to the lack of large equipment for element test. But large soil structures made of coarse granular materials are generally important infrastructures. Therefore, the reliable design parameters for coarse materials should be obtained for safe and economic design, construction and maintenance. Triaxial test is the laboratory test method that is capable of controlling a confining pressure and boundary condition. In this project, we made a multi-purpose large triaxial testing system. This testing system is able to test coarse granular materials with maximum particle diameter of 100mm and support both the load control and displacement control. The load cell is installed inside of triaxial cell and the axial displacement is measured locally in order to control and measure more accurately in the small strain level. The verification test of this testing system was carried out with urethane verification specimens. So, from now on the useful information for coarse granular materials are expected to suggested by performing many tests with various material and condition.

• 대한교통학회지
• /
• 제33권5호
• /
• pp.431-440
• /
• 2015

본 연구는 국내 및 해외 국가의 철도물류 운영현황을 다양한 지표를 활용하여 비교 검토하여 국내 철도물류 경쟁력에 대한 시사점을 도출하고자 한다. 취득가능한 데이터들을 고려하여 국가간 비교가능한 검토항목과 철도물류회사간 비교가능한 검토항목으로 나누어 연구를 수행하였다. 국가별 화물열차 운행밀도, 화물 열차당 수송량, 화물의 평균 수송거리를 비교하였으며 철도화물회사별 단위수송당 매출액, 영업계수, 직원 1인당 매출액, 직원1인당 수송실적, 단위수송당 영업비용, 영업비용 중 인건비 비중 등을 비교검토 하였다. 분석 결과 우리나라는 다빈도 소량 수송을 하고 있는 상황으로 대량수송의 장점을 충분히 활용하고 있지 못하는 것으로 나타났으며 직원 1인당 수송실적 등 철도화물분야 생산성이 해외 철도화물회사 대비 낮은 것으로 분석되었다.

• 가정간호학회지
• /
• 제12권1권
• /
• pp.70-91
• /
• 2005

Purpose: Long-term care facilities have a responsibility to provide care service that enables residents to maintain their maximal functional capacity and quality of life. Also their needs must be reflected to the service programs. In oder to provide an adequate service, we should assess the elderly's physical, psychological and social health status and the need. In addition to this, the long-term care facilities must be defined clearly by the type of services. This study would contribute to conduct appropriate services in public long-term care policy for the older population in the future. This study would provide informations of long-term care facilities' services and older persons' needs for long-term care. Method: To achieve this objectives, this paper investigates the types, service programs of long-term care institutes and job descriptions of workers. The subjects were consisted of 150 long-term care institutes. 150 institutes of long-term care facilities were drawn from all over the country by a nonrandom, convenience sampling. The data were analyzed by frequency, percentage, $x^2$-test using SPSS program. The instruments of this study were self-reported questionnaires for long-term care institutes. The data were collected from March 1, 2004 to may 31, 2004. Results: Service programs of long-term care institutes were not enough for residents' demands. The job descriptions among nurse, social worker and physical therapist were not clearly defined. The nurse's main role was medication and checking vital sign(49.7%), that of social worker's was observation and supervising (31.2%). The most significant problems were lacking of diverse service programs for residents. Conclusion: Considering these findings and conclusion, the needs of long-term care services should be provided by individual physical and psychological level. And the professional manpower for elderly should be educated in multi disciplines.

• 한국지역사회생활과학회지
• /
• 제21권4호
• /
• pp.619-631
• /
• 2010

The purpose of this study is to segment and examine urban farmers behavior by applying a two-step cluster analysis and multi-nominal logit model. The data were collected by a telephone survey with two-staged stratified random sampling in the cities around the country for the purpose of acquiring representative data. Respondents were asked to describe their awareness of urban agriculture, their agricultural activity, and sociodemographic characteristics. Among 2,000 cases, 381 cases(19.1%) which were of participants in urban agriculture were analysed in SPSS. From the findings, 27.3% of respondents had heard the word 'urban agriculture', and 25.5% of them regarded themselves as urban farmers. Four different clusters were derived from two-step clusters based on motive, place, companion, area and hours. They were 'Large scale hobby farming(cluster 1)', ‘Weekend farm/ hobby farming(cluster 2)', 'Land/ Self-supporting farming(cluster 3)', and 'Small scale hobby farming(cluster 4)'. The result of multinomial logistic regression showed that there were significant differences among these four segmented groups in terms of age, city size and housing type. In other words, there is quite a possibility that urbanites select different urban farming types according to their socio-demographic profiles. Therefore, the urbanite profiles can be used as the basis for promoting policy of several urban agriculture types. According to the result, policy directions for facilitating urban agriculture were presented.

• Design & Manufacturing
• /
• 제13권4호
• /
• pp.45-50
• /
• 2019

The fourth industrial revolution calls for an integrated talent by improving working-level skills within the big framework of creativity and convergence. Therefore, university education focuses on solving the problem of practical ability education by improving employment ability. Based on this improvement in practical skills, this study is based on the field-based design curriculum of Capstone. Currently, the Capstone Design Course is being implemented at most universities, extending its scope to the fields of engineering, humanities, social studies and arts. However, there is a limit to the core concept of Capstone design education and capacity education developed in line with the foreign educational environment and applied directly to our nation's university education. In terms of overseas cases, the core focus is to develop practical, design, and prototype capabilities by forming a team among all grades and multidisciplinary institutions to support the capital and manpower of the industry. However, the nation's industrial linkage and curriculum have difficulties in carrying out multi-disciplinary education. In this study, students were asked to team up and solve the challenges that the industry needs based on the expertise acquired in the lower grade curriculum by applying majors and 3D printing through the first and second semester courses of the fourth grade to address these limitations. In addition, business skills for the process of creativity and leadership experience in our country through a suitable design capstone class to review the efficiency of education by applying a model. In order to achieve the purpose of Capstone design subject, the goal setting, class model composition, class model application, verification and evaluation, and final class model development procedures were carried out. Through this process, it will be used as a basic material for educating design class capstone design.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.326-331
• /
• 2006

The durability of recent motors is longer than the past one because there are the rapid technique development of the automobile industry and the vehicle maintenance of users. And then the importance of the durability test due to vibration is increased from day to day. So full vehicle and parts companies accomplish the durability test using various methods. The most public test method among them is the reliable field test but it bring on higher cost and period of the development process. The durability test using MAST(multi axis simulation table) is a solution in order to improve the development process of automobiles. Generally its excitation source uses the optimized road profiles that are obtained by the road test of belgian road, country road, cobbleston road and so on instead of a real field but the interrelations and influences accordingly vehicle damage are considered by a field test between specific roads and real fields in the first place. Therefore this study, in order to accomplish a basic research for the durability test using the MAST, performed on the real field driving test at various domestic roads and the results which are analyzed by PSD(power spectrum density) are compared with relative sensitivity among the roads. Consequently they can present a basic material for generation of road profiles which is applied to the durability test using MAST.

• 패션비즈니스
• /
• 제13권2호
• /
• pp.100-114
• /
• 2009

In Honam province, the cultural prototype are largely unknown to the people, also the research on this subject are scarce, the artistic excellence, somewhat under evaluated, both in our country and internationally. It is imperative that we develop the modern design using this prototype. thereby apply it to many areas of cultural products. We should extend the dimension not only to the local festival but also to the mass production resulting in the commercial gains. The Unjusa Buddha festival for promoting the public relation would be greatly benefited by using the concept of the temple, the local prototype, by which we expect to create a ingenious textile design pattern, coinciding with the main purpose of this study. The ancient material around Unjusa come to be the subject of our textile design by way of selecting the most remarkable ones of heritage among the materials of Unjusa. In the long run, the harmonious contrast of both traditional and modern image were sought in this study. Designed patterns were edited using Adobe Photoshop CS3, a multi-purpose graphic program and were simulated in the towel for visual presentation. The design is of two kinds, the one is of the free style using combinations of reclining Buddha, stone Buddha, stone pagoda, and geometric patterns freely not to be standardized. The other one is mixing of lotus pattern, reclining Buddha, and geometric patterns. These designs were applied delicately on the towel, necktie and handkerchief, and the various colors were suggested by the 6 color ways. The brilliance of our traditional cultural property should be noted by these designs and I hope that this study would be a help to develop our cultural prototype and make a product of using the outstanding heritage.

• 한국콘텐츠학회논문지
• /
• 제13권10호
• /
• pp.92-102
• /
• 2013

지속적으로 진화하고 있는 휴대용 모바일기기는 오늘날, 사전 상에서 정의되는 커뮤니케이션의 기능을 넘어 엔터테인먼트의 기능 및 인포메이션의 기능까지 그 기능이 매우 방대해 졌다. 특히 한국은 새로운 기술을 보다 적극적인 자세로 받아들이는 성향을 보이고 있음에 따라 모바일기기의 내부 기능과 외부 디자인으로 구분되어지는 3세대 피쳐폰과 4세대 스마트폰의 사용행태를 비교 탐구해볼 시점이다. 본 연구는 오늘날의 모바일기기가 다양한 사용목적을 위한 매체로 활용됨에 따라 사용행태에 영향을 미치는 요인과 매체를 어떻게 활용하는지를 매체 풍요도 이론과 정교화가능성 모델의 관점에서 설명하였으며 연구방법으로 적용한 사례연구방법론은 20대 전반 대학생들 가운데 만 20세~24세 사이의 여학생을 중심으로 조사대상자 그룹을 선정하여 모바일 기기 세대별 사용 행태 변화를 감지하였다. 세대별 진화에 따른 모바일 기기 사용 행태는 보다 오프라인의 실생활 방식 및 인간관계와 유사해지며, 사용 행태의 변화양상은 앞으로 개발될 개인 휴대용 모바일 기기의 발전 방향이 모든 영역에 있어 보다 현실 속 모습과 같은 정서적 연대를 위한 사용자를 닮은 휴머니티가 강조된 모습으로 이루어질 것이라 추측된다.

• 한국의류학회지
• /
• 제28권9_10호
• /
• pp.1341-1350
• /
• 2004

With the advent of the globalization trend of the industry, the enterprises in the fashion industry around the world have witnessed a surge in exports and foreign direct investment (FDI). Many fashion enterprises in each country, along with the multi-national enterprises, have engaged in global outsourcing of the production process in order to increase their global competitiveness, and have attempted to expand their commercial presence in the world market by entering into other foreign markets. Such market entry attempts have lead to the increase of FDI and trade by the fashion enterprises. This study attempts to examine the interactive relation between FDI and export/import of fashion products in different fashion industries both worldwide and in Korea. First, we will look into the relation between export/imports and FDI of each regional fashion industry, then expand the study to the relation between those two factors found in the fashion industry of Korea in general, and finally, to the relation between the two factors in the fashion industry of countries that are the major export nations of fashion goods into Korea. The data which this study is based on were collected from the International Trade Statistics Yearbook Vol. II (UN, 1991-2002, New York: UN), UNCTAD Handbook of Statistics (UN, 1996-2001, Vienna: UN), UNCTAD database, the archives of the Korea Federation of Textile Industry and the archives of the Export-Import Bank of Korea. The methods of analysis used in this study were correlation, regression, and descriptive statistics of the data. The result of this study showed that each fashion industry of different regions was subject to a diversity of effects. For one, the fashion industry in Korea showed a significant correlation between outbound investment and both export and import. On the other hand, the apparel industry in Korea showed a significant correlation between outbound investment and imports, but no such correlation between outbound investment and exports.

• 대한약리학회지
• /
• 제11권2호
• /
• pp.47-53
• /
• 1975

Pan-Korean multi-center trial of doxycycline in the treatment of upper and lower respiratory infection was carried out in the summer(from May to October) of 1975. A total of 204 patients between the ages of 3 and 75 was treated by 37 physicians including the internal medicine, pediatrics and ENT specialist in 17 general hospitals and 2 private clinics all-over the country. The dosage recommended was 200 mg on the first day of therapy followed by 100 mg daily thereafter. The pediatric dosage was 4 mg/kg on the first day and then 2mg/kg on each successive day. The subjective and objective signs of respiratory infection such as temperature, cough, sputum, pain and associated inflammatory symptoms were assessed using the carefully designed protocols and it showed rapid improvement by the fifth day (80%) of therapy. Only minor side-effects were reported and these were mild and mainly limited to gastrointestinal tract. The overall evaluation of the trial showed that 170 patients(83.3%) had a very good or good result, 13 patients (6.4%) a moderate and another 13 patients (6.4%) a negative result.