• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.834-839
• /
• 2003

Previous research has been conducted on an ultrasonic wave reflection method that utilizes a steel plate embedded in the concrete to measure the reflection loss of shear waves at the steel-concrete interface. The reflection loss has been shown to have a linear relationship to compressive strength at early ages. The presented investigations continue this research by examining the fundamental relationship between the reflection loss, measured with shear waves, and the hydration kinetics of Portland cement mortar, represented by dynamic elastic moduli, compressive strength and degree of hydration. Dynamic elastic moduli are measured by fundamental resonant frequency and degree of hydration is determined by thermogravimetric analysis. The water/cement ratio was varied for the tested mixture compositions. The results presented herein show that compressive strength, dynamic shear modulus and degree of hydration have a linear relationship to the reflection loss for the tested mortars at early ages.

• Journal of the Korean Ceramic Society
• /
• v.32 no.8
• /
• pp.873-880
• /
• 1995

In order to prepare the modified belite (C2S-C4A3S-C4AF-CS) cement with low energy, clinkers were synthesized by converter slag, limestone, gypsum and clay. The synthesized clinkers were characterized and the hydration processes were investigated by XRD, SEM and microconduction calorimetry. The hydrates were mainly C-S-H and ettringite. The needle-like ettringite formed by the hydration of C4A3S at the early stage of hydration was filled in the inner vacant spaces of the hardened body and it might contribute to the rapid-hardening phenomena. The hardened body became stronger due to the hydration of C2S at the later period. The compressive strengths of the cement-3 mortars hydrated for 3, 7 and 28 days were 115, 128 and 211 Kgf/$\textrm{cm}^2$, respectively.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.160-163
• /
• 2005

Several sensors are involved in the cor개sion monitoring of concrete structures. This paper deals with the monitoring of concrete structures by embeddable reference sensors. $MnO_2$, MMO and graphite reference sensors are fabricated in the laboratory as suitable as embeddable type into the concrete structures. Sensors are embedded into the mortars and the performance was studied in the absence and presence of chloride ions. The electrochemical stability of the sensors was carried out for the exposure period of one year. Polarisation behaviour and impedance of the sensors in mortar was carried out in three aqueous solutions namely distilled water, 3% NaCl and natural sea water.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.133-134
• /
• 2017

The In the experiment on flow using sand walls, when white clay+sand was mixed with glutinous rice, traditional paper and seaweed as adherents and preventive measures for cracks, the flow was higher than other sand wall mortars. This indicates that it is effective in improving flow. Moreover, in terms of strength, a mix of white clay+sand, traditional paper and flour had a greater strength than a mix of white clay+sand, straws and flour. In the experiment to test for cracks and shrinking during drying, a composition of white clay+sand+traditional paper showed fewer cracks and less shrinking than the walls where straws were mixed in.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.59-62
• /
• 2007

Nowadays, polymer-cement mortars are widely used in construction field(floorings and pavements, water-proofings, adhesives, repair materials, deck coverings, anti-corrosive linings) Because of excellent performance such as high tensile and flexural strength, waterproofness, excellent adhesion, good durability, improved wear and chemical resistances. This article presents the results of experimental study that investigates the effect of ambient temperature on the strength properties of polymer-modified cement mortar. Results show that when increasing the polymer proportion in mortar on different ambient temperature, the compressive strength and flexural strength are decreased, and also alkali resistance is decreased.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.193-194
• /
• 2018

Tn this present study, the superhydrophobic surface was developed on the cement mortar surface by using water repellent materials. For better superhydropohicity, it was developed by using silane as binder and which was enriched with filler materials of SiO₂ and TiO₂ nanomaterials. Those nanomaterials enriched with silanes were admixed in cement mortar during casting time and another was coated on the cement mortar surface. The water repellent properties of spray coated and admixed cement mortars were evaluated by measuring the contact angle which was compared with normal cement mortar.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.19-20
• /
• 2018

For this study, a test was conducted on the basic polymer property depending on the replacement amount of polymer. The result showed that the flow of slump was increased with the increase of polymer replacement amount and an amount of air entraining. In addition, with a decrease of unit W/B, an amount of bleeding was reduced, and the first and final time for 6% replacement amount was found to be the fastest. This implies that replacement of more than 6% may affect the hydration of cement.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.1
• /
• pp.97-105
• /
• 1999

Recently , polymer concrete has been widely used in the construction industry because of its quick setting, high strength, excellect adhesion, watertightness and chemical resistance compared to ordinary cement concrete. Its application is also increased. In this paper, lightweight polymer mortars using unsaturated polyester resin and lightweight aggregate are prepared with various mix proportations, and tested for slump working life, apparent specific gravity , flexural and compressive strengths. As a result, the slump and working life can be controlled and thier flexural and compressive strengths are 9.7 to 22.0 MPa , and 23.0 to 100.8 MPa respectively at apparent specific gravities of 0.86 to 1.73.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.921-924
• /
• 2000

The purpose of this paper is to investigate the effects of admixture such as AE water reducing agent and Flyash on properties of cement mortar for floor. As for the effects of AE water reducing agent kinds, fluidity and air content increase in order for melamine type, lignine type and naphtalene type. As Flyash contents increase, fluidity shows high, but air content shows decline tendency. compressive strength according to AE water reducing agent kinds increase in order for melamine type, lignine type and naphtalene type. As AE water reducing agent content increases, it shows to be decreased. As for the effects of Flyash, it retards at early age but at later age it gains high with increase of Flyash contents due to pozzanic reaction. Drying shrinkage shows to be docreased slightly with increase of AE water reducing agent.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.929-932
• /
• 2000

In this paper, physical properties of fresh and hardened mortar for floor using expansion agent are described under various grain shape, grading and chloride contents of aggregates. According to experimental results, as fineness modulous increase, fluidity show high it also shows high with cement mortar using riversand and continuous distribution of grading. We can not detect any difference in fluidity according to chloride contents. Air content shows to be decreased with crushed stone having large fineness modulous and continuous distribute on of grading. chloride content does not influence on the air content. compressive strength tends to increase when crushed sand with continuous distribution of grading is used and chloride contents decreases.