• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.2
• /
• pp.101-107
• /
• 2002

High performance packages must protect circuits from the internal leakaged-electromagnetic fields as well as the surrounding. In this paper, we characterized an electromagnetically-shielded millimeter-wave ceramic package from 20 to 40 ㎓ using FEM(Finite Element Method). From these calculation results, the parasitic resonance is observed at 33.4 ㎓. We use metal-filled via-holes at the ceramic package walls and resonance has been suppressed in a frequency range from 20 to 40 ㎓. These calculation results will be helpful for MMIC packaging using electromagnetically-shielded millimeter-wave ceramic packages.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.184-184
• /
• 2012

We proposed a new measurement method of cutoff probe using the reactance spectrum of the plasma in cutoff probe system instead of transmission spectrum. The high accurate reactance spectrum of the plasma which is expected in previous circuit simulation of cutoff probe [1] was measured by using the automatic port extension method of the network analyzer. The measured reactance spectrum is good agreement with E/M wave simulation result (CST Microwave Studio). From the analysis of the measured reactance spectrum based on the circuit modeling, not only the electron density but also electron-neutral collision frequency can be simply obtained. The obtained results of electron density and e-n collision frequency were presented and discussed in wide range of experimental conditions, together with comparison result with previous methods (a previous cutoff probe using transmission spectrum and a single langmuir probe).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.3
• /
• pp.43-48
• /
• 2000

In this paper, vortical integrated transformers using bondwires are proposed and characterized for MMIC's (Monolithic Microwave Integrated Circuits) In a wide range of frequencies (1∼20 GHz), where full-wave analysis by the FEM (Finite Element Method) was adopted. The electrical characteristics of the proposed transformers are compared with those of the spiral transformer. We extracted mutual inductances from S -parameters. The vertical transformers using bondwires have not only low insertion loss but also reduce parasitic capacitances and dielectric loss due to their separation from substrates. It can be fabricated easily by used of the modern automatic wirebonding technology. It is expected that the proposed transformers are to improve the performance of MMIC's applied to impedance matching, and phase shifting circuits.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.163-167
• /
• 2002

In order to study the temperature dependence of the magnetostatic wave modes for an YIG thin film, grown by a liquid phase epitaxy method, The ferromagnetic resonance was performed by an FMR spectrometer in the temperature range -140$\^{C}$∼200$\^{C}$. The magnetostatic surface wave and backward volume wave modes show periodic excitations in parallel configuration. The resonance fields of all modes and intensities decreased with decreasing the temperature. All magnetostatic modes can be well explained by the Walker and Damon-Eshbach theory. The calculated saturation magnetization Ms of the YIG thin film was increased with decreasing the temperature. The line widths of magnetostatic modes changed in various trends with decreasing the temperature.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.1
• /
• pp.92-99
• /
• 1994

Diamond thin film was deposited on n type (100) Si substrate by MPECVD(Microwave plasma Enhanced Chemical Vapor Deposition). For the increase in nucleation density of diamond, Si substrate was pretreated by diamond powder or negative bias voltage was applied to the substrate during the initial deposition. In the case of retreated Si substrate, the diamond thin film quality was enhanced with increasing the total pressure in the range of 20~150 Torr. For the negative bias voltage, the formation condition of the diamond was seriously affected by $CH_4$ concentration and total pressure. The formation condition will be discussed with electrical current of substrate generated by plasma ions which depend on $CH_4$concentration, bias voltage, and total pressure.

• Environmental Engineering Research
• /
• v.22 no.1
• /
• pp.12-18
• /
• 2017

Struvite precipitation has been proven to be an effective method in removing and recovering ammonia nitrogen (N) and phosphate phosphorus (P) from wastewater. In this study, effects of pH, molar ratios and pre-treatment of effluent of anaerobically digested swine wastewater were investigated to improve struvite crystallization. The magnesium : ammonium : phosphate ratio of 1.2 : 1.0 : 1.0 was found to be optimal, yet the molar ratio in the wastewater was 1 : 74.9 : 1.8. From the analysis, the optimum pH was between 8.0 and 9.0 for maximal phosphate P release and from 8.0 to 10.0 for maximal ammonia N and phosphate P removal from real wastewater. Analysis from Visual MINTEQ predicted the pH range of 7-11 for ammonia N and phosphate P removal and recovery as struvite. For pre-treatment, microwave pre-treatment was ineffective for phosphate P release but ultrasound pre-treatment showed up to 77.4% phosphate P release at 1,000 kJ/L of energy dose. Precipitates analysis showed that phosphorus and magnesium in the collected precipitate had almost same values as theoretical values, but the ammonia content was less than the theoretical value.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.9
• /
• pp.1374-1379
• /
• 2015

Time Domain Reflectometry(TDR) using microwave bands, including broadband spectrum that occurs at the range of rates that start between partial discharge position it easier to make the techniques that could be measured. Partial discharge in the Gas Insulated Switchgear(GIS), the dielectric constant in the band more than GHz different the insulating material if you want to organize, and the insulating material regardless of how partial discharge position in the SF6 gas Partial Discharge by applying the heritability estimated its position, but the position error occurred about 23 percent of the existing way, correct in not suitable location tracking the outbreak PD. This technique the rate of other dielectric that make up the power apparatus heterology is measured at the function to slow the progression of the electromagnetic waves apart by calculating the partial discharge as the location, A simple way to track. Dielectric using other methods proposed new structure can calculate the speed of heritability PD is occurring can measure.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.12
• /
• pp.1-7
• /
• 1998

in this work, we designed and characterized a 10Gb/s clock and regeneration circuit. The circuit was realized by integrating high-speed ICs and microwave circuits on alumina substrates. The quadri-correlation method was used for frequency and phase-locked loop. The frequency locking range was 150MHz and the rms jitter generated by the circuit was measured to be less than 1.0ps. The clock and data regeneration circuit was successfully applied to 10Gb/s optical receiver.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.203-207
• /
• 1999

In this paper we report new integration technology developed for three-dimensional metallic microstructures in an arbitrary shape. We have developed the two fabrication methods: Multi-Exposure and Single-Development (MESD) and Sacrificial Metallic Mold(SMM) techniques. Three-dimensional photoresist mold can be formed by the MESD method while unlimited number of structural levels can be realized by the SMM technique. Using these two techniques we have fabricated solenoid inductors and levitated spiral inductors for RF applications. We have achieved peak Q- factors over 40 in the 2-10㎓ range, the highest number among the inductors reported to date. Finally, we propose "On-Chip Passives" as a post IC process for monolithic integration of inductors, tunable capacitors, microwave switches, transmission lines, and mixers and filters toward future single-chip transceiver integration.

• Journal of electromagnetic engineering and science
• /
• v.16 no.1
• /
• pp.7-12
• /
• 2016

This paper presents the design of a negative group delay circuit (NGDC) using the filter synthesis approach. The proposed design method is based on a frequency transformation from a low-pass filter (LPF) to a bandstop filter (BSF). The predefined negative group delay (NGD) can be obtained by inserting resistors into resonators. To implement a circuit with a distributed transmission line, a circuit conversion technique is employed. Both theoretical and experimental results are provided for validating of the proposed approach. For NGD bandwidth and magnitude flatness enhancements, two second-order NGDCs with slightly different center frequencies are cascaded. In the experiment, group delay of $5.9{\pm}0.5ns$ and insertion loss of $39.95{\pm}0.5dB$ are obtained in the frequency range of 1.935-2.001 GHz.