• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2004년도 추계학술대회 및 정기총회
• /
• pp.349-352
• /
• 2004

In this paper, we propose a newly energy-efficient routing protocol, which is called Maximum Utility Routing(MUR), in mobile ad hoc networks (MANETs) so as to investigate the minimum energy and maximum lifetimes issues together. We present a utility-based framework so as to meet various incompatible constraints simultaneously and fairly. To explore this issue, we use the concepts and mathematics of microeconomics and game theory. Though simulation results, we show that our routing scheme has much better performance especially in terms of network efficiency, network lifetime, and average power consumption.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
• /
• pp.1609-1615
• /
• 2006

Overlay multicast technique is an effective way as an alternative to IP multicast. Traditional IP multicast is not widely deployed because of the complexity of IP multicast technology and lack of application. But overlay multicast can be easily deployed by effectively reducing complexity of network routers. Because overlay multicast resides on top of densely connected IP network, In case of multimedia streaming service over overlay multicast tree, real-time data is sensitive to end-to-end delay. Therefore, moderate algorithm's development to this network environment is very important. In this paper, we are interested in minimizing maximum end-to-end delay in overlay multicast tree. The problem is formulated as a degree-bounded minimum delay spanning tree, which is a problem well-known as NP-hard. We develop tabu search heuristic with intensification and diversification strategies. Robust experimental results show that is comparable to the optimal solution and applicable in real time

• 한국경영과학회지
• /
• 제22권4호
• /
• pp.115-131
• /
• 1997

The problem addressed in this paper is to minimize the deviations of workloads assigned to worker and to maximize the total utilizations(degree of skill) between workers and machines simultaneously. Each worker can handle the set of machines with the different degree of skill and each machine has the workloads needed to be processed. Also, each worker has to be assigned to at least one machine with the minimum workload deviation. This problem can be formulated as a preemptive goal programming with generalized assignment constraints. The proposed algorithm consists of two phases. First, a capacitated circulation network is constructed to assign the workers to machines with the maximum total utilizations while considering workloads balance. Then, a refinement process is applied to the split machines to satisfy the feasibility condition. The real industrial application in a plastic extrusion manufacturer is included along with several computational experiments.

• 농업과학연구
• /
• 제46권3호
• /
• pp.613-627
• /
• 2019

The purpose of this study was to design a powertrain for a 78 kW AWD (all wheel drive) electric tractor by analyzing the combination of various reduction gear ratios on a commercial motor using data from actual agricultural work and driving conditions. A load measurement system was constructed to collect data using wheel torque meters, proximity sensors, and a data acquisition system. Field experiments for measuring load data were performed for two environmental driving conditions (on asphalt and soil) and four agricultural operations (plow tillage, rotary tillage, loader operation, and baler operation). The attached implements and gear stages were selected through farmer surveys. The range of the reduction ratio was determined by selecting the minimum reduction ratio needed to satisfy the torque condition required for agricultural operations and the maximum reduction gear ratio to satisfy the maximum travel speed. The minimum reduction gear ratio selected was 57 in consideration of the working load condition and the maximum reduction gear ratio selected was 62 considering the maximum running speed. In the range of the reduction gear ratio 57 - 62, the selected motor satisfied all working torque conditions. As a result, the combination of the selected motor and reduction gear ratio was applicable for satisfying the loads required during agricultural operation and driving operation.

• 소성∙가공
• /
• 제12권7호
• /
• pp.647-653
• /
• 2003

A systematic approach for the process design in deep drawing is necessary to improve the quality of drawn cups. This study concentrates mainly on the influence of process design strategy on the product quality. Different types of process design were chosen from initial blank of 100mm in diameter to make final cup of 50mm in diameter. In order to make this cup, we used 2-stage deep drawing. Forming analyses are carried out to find out better design in terms of drawing force. It is proposed that the process design, in which maximum drawing forces during successive operations are equal, is a more desirable one. Through experiment, it is found that the proposed case shows equivalent values in terms of maximum drawing force during successive operations in real process and can achieve the best product quality in terms of dimensional accuracy. Thus, it is shown that proposed design is very effective in the improvement of quality in drawn cups and may be extended to deep drawing with more stages.

• 한국인터넷방송통신학회논문지
• /
• 제14권6호
• /
• pp.55-61
• /
• 2014

본 논문은 CMA 적응등화기에서 최소 disturbance 기법을 적용하여 진폭과 위상의 동시 보상이 가능한 ECMA (Enchanced CMA) 알고리즘의 성능에 관한 것이다. ECMA는 적응등화기 탭 계수의 변화량을 squared euclidean norm 관점에서 최소화하는 최소 disturbance 기법과 decision directed mode에 의한 gradient noise amplification 문제와 안정도 및 roburstness 성능을 알고리즘 연산량의 큰 증가없이 개선할 수 있고, 수신신호에서 진폭과 위상의 동시 보상이 가능하도록 새로운 비용함수를 제안하였다. 논문에서는 ECMA 알고리즘의 성능을 MCMA와 비교하기 위하여 컴퓨터 시뮬레이션을 수행하였다. 이를 위하여 수신측에서의 등화기 출력신호인 복원된 신호 성상도, 수렴 성능을 나타내는 성능지수인 잔류 isi 및 MD (Maximum Distortion), MSE 특성곡선과 채널과 등화기의 종합 주파수 특성을 성능 비교 지수로 사용하였다. 시뮬레이션 결과 ECMA가 복원성상도에서 진폭과 위상보상 능력 및 적응등화를 위한 수렴시간에서 MCMA보다 우월함을 알 수 있었다.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.917-924
• /
• 2019

This paper presents a wideband low noise amplifier (LNA) that is suitable for LTE-Advanced and 5G communication standards employing carrier aggregation (CA). The proposed LNA encompasses a common input stage and a dual output second stage with a buffer at each distinct output. This architecture is targeted to operate in both intra-band (contiguous and non-contiguous) and inter-band CA. In the proposed design, the input and second stages employ a gm enhancement with resistive feedback technique to achieve self-biasing, enhanced gain, wide bandwidth as well as reduced noise figure of the proposed LNA. An up/down power controller controls the single input single out (SISO) and single input multiple outputs (SIMO) modes of operation for inter-band and intra-band operations. The proposed LNA is designed with a 45nm CMOS technology. For SISO mode of operation, the LNA operates from 0.52GHz to 4.29GHz with a maximum power gain of 17.77dB, 2.88dB minimum noise figure and input (output) matching performance better than -10dB. For SIMO mode of operation, the proposed LNA operates from 0.52GHz to 4.44GHz with a maximum voltage gain of 18.30dB, a minimum noise figure of 2.82dB with equally good matching performance. An $IIP_3$ value of -6.7dBm is achieved in both SISO and SIMO operations. with a maximum current of 42mA consumed (LNA+buffer in SIMO operation) from a 1.2V supply.

• 설비공학논문집
• /
• 제8권1호
• /
• pp.37-44
• /
• 1996

Water hammer pressure waves were measured in a simplified water piping system with and without arresters and air chambers by the operations of the solenoid valve. Experiments were performed to investigate the effects of the location of the arresters and the effects of the volume of the air chambers on maximum and minimum water hammer pressures and wave frequency for various flow rates.

• 경영과학
• /
• 제13권3호
• /
• pp.37-48
• /
• 1996

This paper presents an Economic Lot Scheduling Problem in which controllable production rates are considered. We also take into account the controllable range of production rate (i.e., maximum and minimum production rate) of each product and the mold cost which varies to the production rate. A mathematical model is developed and an iterative solution procedure is suggested. The objective of this problem is to minimize production related cost and the decision variables are common production cycle time and production rate of each product. As a case study, we adapted this model to the press machine of a company.

• 경영과학
• /
• 제7권2호
• /
• pp.51-57
• /
• 1990

The purpose of this thesis is to find the shortest path between two nodes on an acyclic network where the arc costs are determined by the starting time at the starting node of the arc. A branch and bound method for optimal solutions and a heuristic method is developed. In heuristic method Dijkstra algorithm is modified to maintain the minimum arrival times of maximum informations in the each time period at each node and is updated by the result with the insertion technique. Expermetal results among two methods are presented with regard to run time and solution qualities.