• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1783-1788
• /
• 2009

We newly propose that we may reuse scrap powders ($Z_rO_2$+8 mol%-$Y_2O_3$) as $Y_2O_3$-stabilized zirconia (YSZ) sintered products through sintering process at 1550$^{circ}C$ for 2hrs. We also prepared the reference specimen from fresh $Z_rO_2$+30 mol%-$Y_2O_3$ powder mixture (celluar type with 1㎛-length). The reference sample showed a dense microstructure with grains of $\sim$10㎛ in diameter, while the sintered sample from scrap powder showed irregular grains of 1$\sim$30 ㎛ in diameter. Through XRD analysis, we confirmed that the reference sample has mixed phases of $Y_2O_3$(cubic), $Z_{r0.8}O_{1.9}$(cubic), and $Z_rO_2$(monoclinic), while the sintered YSZ sample from scrap powder has only tetragonal phase. Moreover, the sintered YSZ from scrap powder showed vickers hardness and apparent density more than 70 and 4.11 g/cc, which implies that it can be suitable for structural material application.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.92-103
• /
• 2015

Box-Wilson experimental design method, known as central composite design, is the design of any information-gathering exercises where variation is present. This method was devised to gather as much data as possible in spite of the low design cost. This method was employed to model the effect of mixing factors on several performances of 60 MPa high strength self compacting concrete and to numerically calculate the optimal mix proportion. The nonlinear relations between factors and responses of HSSCC were approximated in the form of second order polynomial equation. In order to characterize five performances like compressive strength, passing ability, segregation resistance, manufacturing cost and density depending on five factors like water-binder ratio, cement content, fine aggregate percentage, fly ash content and superplasticizer content, the experiments were made at the total 52 experimental points composed of 32 factorial points, 10 axial points and 10 center points. The study results showed that Box-Wilson experimental design was really effective in designing the experiments and analyzing the relation between factor and response.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.744-752
• /
• 2013

The miscibility between poly(L-lactide) (PLLA) and poly(methyl methacrylate) (PMMA) was investigated using thermal analyses for the purpose of developing birefringence-free material at oriented state. The effect of methyl acrylate (MA) units as comonomer of PMMA on the miscibility was also studied. All the blends prepared in this study show composition-dependent single $T_g$'s between those of blend components and high transparency over the visible region, indicating the miscibility at molecular level and no discernible effect of MA units on it. No phase separation was observed at elevated temperature of $280^{\circ}C$, higher than the degradation of PLLA and PMMA. The interaction energy density in PLLA/PMMA blends with 17 mol% of MA was measured to be $-0.74J/cm^3$ from the equilibrium melting temperature depression based on the Hoffman-Weeks method. The blends show zero-${\Delta}$n behavior at a specific mixing ratio and the drawing ratio of 3 due to compensation of intrinsic orientation birefringence. Birefringence dispersion of PLLA/PMMA5 blends was also measured to examine the possibility for quarter-wave plates or polarizer protective films.

• Korean Journal of Microbiology
• /
• v.34 no.4
• /
• pp.236-242
• /
• 1998

While bacteriophage P2-P4 system is very useful experimental tool for the study of viral capsid assembly, there is no useful plasmid vector for the DNA manipulation in bacteriophage P2-P4 system. In this study, a new vector plasmid, P4 ash8 (sid71) kmr, was constructed by swapping the non-essential region of P4 DNA for kanamycin resistance(kmr) gene cassette of plasmid pUC4-K. P4 ash8 sid71 was starting material for the construction, since it tends to be maintained as a plasmid in the absence of the helper phage. The total size of this chimera was designed to be packaged into P4 or P2 size heads with induction by P2 infection. The conversion of plasmid P4 ash8 (sid71) kmr to bacteriophage was proved by burst size determination experiment and CsCl buoyant equilibrium density gradient experiment. Integrase destructed P4 derivative, P4 ash8 sid71 kmr intS, was able to be constructed easily by in vitro DNA manipulation of P4 ash8 sid71 kmr. The plasmid stability experiment with P4 ash8 sid71 kmr if/tS showed that the integrase of P4 affects the stable maintenance of plasmid P4 state.

• Korean Journal of Head & Neck Oncology
• /
• v.21 no.1
• /
• pp.3-9
• /
• 2005

Purpose: In oral tongue cancer, the degree of tumor invasion has a significant effect on the prognosis. We hypothesized that the destruction of extracelluar matrix and neovascularization are related to tumor infiltration mechanism. By studying the the tissues of early stage oral tongue cancer patients, we are intend to clarify the invasion related factors in oral tongue cancer. Material and Methods: To demonstrate the invasion process in early T-stage oral tongue cancer, the expressions of extracellular matrix destruction related molecules(MMP2, MMP9) and neovascularization related molecule(VEGF) were observed by immunohistochemical study. Also, immunohistochemical staining of CD31 was done for quantification of neovascularization. With the experiment showed above, we analyzed relationship between expression of each substances and tumor invasion depth, tumor free survival rates and cervical lymph node metastasis rate in early T-stage oral tongue cancer. Results: The expression rates of MMP2, MMP9, VEGF in 38 early oral cancer patients were 52.6%, 78.9% 52.6%, respectively. Significant correlation was found between the VEGF expression and microvessel density showed by CD31 immunohistochemical staining(p<0.001). VEGF expressions were significantly related with tumor invasion depth(p=0.002). The tumor free survival rate of those patients with VEGF-positive tumors was significantly poorer than in those with VEGF-negative tumors(p=0.019). Conclusion: This results indicate that VEGF is a useful marker for predicting the tumor invasion in patients with early tongue cancer and could be used as a beneficial factors in defining operative field and prognosis.

• Resources Recycling
• /
• v.29 no.1
• /
• pp.17-24
• /
• 2020

In this study, rare earth elements (REE) leaching from a refractory REE ore containing goethite as a major gangue mineral was conducted, introducing a two-stage method of chemical decomposition-acid leaching. At the chemical decomposition step, using one of alkaline agent, NaOH, the ore was decomposed, changing NaOH concentration from 20 to 50 wt% at 10% (w/w) of pulp density and the maximum temperature achieved without boiling at each NaOH concentration. With increasing NaOH concentration, light REE (Ce, La and Nd) and iron were concentrated in the solid phase which is the decomposed product, while aluminum (Al) and phosphorus (P) were removed to the liquid phase, and their concentrations in the solid phase were down to 0.96 and 0.17%, respectively. In addition, through XRD analysis, it was found that the crystallinity of goethite was considerably decreased. At the acid leaching step, the product decomposed by 50 wt% NaOH was leached at 3.0 M HCl and 80 ℃ for 3 hr, then the REE leaching efficiency was above 94% (Ce 80%), and the leaching efficiencies of Al and P were decreased to 12 and 0%, respectively. Therefore, in terms of both REE leaching efficiency and impurity removal, those decomposition and leaching conditions were chosen as optimum processing methods of the investigated material. In terms of REE leaching mechanism, because REE and iron leaching efficiencies showed the positive correlation each other, so it can be concluded that decreasing crystallinity of goethite affect the improvement of REE leaching.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.24-34
• /
• 2020

This research is a study on the characteristics of OPC-slag cement using nano-silica solution (NSS) with water-weight substitution method. The new replacement method is a fundamental step to study the behavior of cement with higher NSS replacement rates than previous studies. NSS was replaced by 10%, 20%, 30%, 40%, and 50% of the mixing water weight. As a result, the mechanical and microstructural characteristics were improved. This can be summarized in two ways. First, when the NSS is replaced with mixing water, the homogeneous dispersion action of the nano-silica particles is improved. This promotes initial hydration. Second, substitution of NSS with higher density than mixing water reduces w / b. This forms a dense hydration reaction material. The new substitution method did not show any degradation of mechanical and microstructural properties as compared with the results using the powdered nano-silica particles revealed in the previous study. Therefore, it is considered that the method of weight substitution of NSS used in this study can be applied to the formulation of OPC-slag cement.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.3
• /
• pp.402-408
• /
• 2016

Master packaging system consists of an inner individual package and secondary outer package. During the stages of chilled transport and distribution, the combination of primary individual package and secondary package was used to maintain a modified atmosphere for shiitake mushrooms. During the retail stage at higher temperature ($25^{\circ}C$), the primary individual package was exposed to display conditions after dismantling of the secondary packaging. The master packaging system was constructed to contain eight individual $30-{\mu}m$ thick polypropylene film bags of 500 g shiitake mushrooms inside a $40-{\mu}m$ low-density polyethylene bag. Carbon dioxide absorbent material [$Ca(OH)_2$] and/or moisture absorbent (superabsorbent polymer) were designed in their required amounts based on respiration characteristics and then applied to the outer secondary packaging in sachet form. Gas concentration of the packaging, temperature, and humidity were monitored throughout transport and storage. The quality of shiitake mushrooms was measured at the retail stage to determine the packaging effect. During the distribution stage of 108 h, $O_2$ and $CO_2$ concentrations in the master packaging system were maintained at 9~11% and 1~4% in the inner packaging, respectively, which are good for quality preservation. Compared to the control, the master packaging with $CO_2$ and/or moisture absorbents improved mushroom preservation and particularly reduced decay.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.4
• /
• pp.334-340
• /
• 2016

The combustion chamber of a diesel engine is often exposed to a more serious wear and corrosion environment than other parts of the engine because its temperature increases as a result of using heavy oil of low quality. Therefore, repair and built-up welding methods must be performed on worn or corroded parts of the piston crown, exhaust valve, etc. from an economical point of view. In this study, Inconel 718 filler metal was used in repair welding on the groove of a forged steel specimen for a piston crown, along with built-up welding on the surface of another forged steel specimen. Then, the corrosion characteristics of the weld metal zone for the repair welding and the deposited metal zone for the built-up welding were investigated using electrochemical methods in a 35% H₂SO₄ solution. The deposited metal zone indicated better corrosion resistance than the weld metal zone, showing a nobler corrosion potential, higher impedance, and smaller corrosion current density. It is considered that metal elements with good corrosion resistance were generally included in the filler metal, and these elements were also greatly involved in the deposited meta by built-up welding, whereas the weld metal consisted of metal elements mixed with both the filler metal and base metal elements because of the molten pool produced by the repair welding. Finally, it is considered that the hardness of the weld metal was increased by the repair welding, whereas the built-up welding improved the corrosion resistance of the deposited metal.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.459-469
• /
• 2019

We present a quantitative evaluation of density, vesicularity and microtextures for coarse lapilli collected from the Jugam Scoria Deposits, northeastern Ulleung Island. Lapilli from the deposits have modal vesicularities of 61% in the lower part and 67% in the upper part, and vesicle populations dominated by non-interconnected subround vesicles. Clasts of modal vesicularity have margin-parallel zonation, with subaerially quenched rims interpreted to preserve "syn-fragmentation" magmatic textures in microlite-free sideromelane rims, grading "post-fragmentation" tachylitic interiors with vesicle and microlite textures that progressively coarsen from rim to interior. Degassing scenarios are linked to syn-fragmentation vesicle textures to demonstrate that the magmas degassed in dominantly closed systems. And diffusion-controlled cooling rates of trachyandesitic pyroclasts in contact with atmosphere are linked to post-fragmentation evolution of vesicle and microlite textures to infer about transportation and dispersal of the pyroclasts in low shooting jets. These textural analyses show that the Jugam eruptions were strictly applied to the strombolian type, analogous to the hawaiian type among any classical subaerial eruption type.