• 제목/요약/키워드: low temperature type

검색결과 1,952건 처리시간 0.028초

상압 저온 플라즈마 전처리한 폴리아미드계 직물의 색농도 (Color Depth of Polyamide Fabrics Pretreated with Low-Temperature Plasma under Atmospheric Pressure)

  • 이문철
    • 한국염색가공학회지
    • /
    • 제5권2호
    • /
    • pp.134-138
    • /
    • 1993
  • Wool, silk and nylon 6 fabrics were treated with low-temperature plasma under atmospheric pressure of acetone/argon or helium/argon for 30 and 180 sec, and then dyed with leveling type acid dye, C.I. Acid Red 18 and milling type acid dye, C.I. Acid Blue 83. In spite of short time of the plasma treatment for thirty seconds, the color depth of wool fabrics was increased remarkably with both of the plasma gases, aceton/argon or helium/argon and with the kinds of dyes i.e., levelin type or milling type. But the atmosperic low-temperature plasmas did not increase the depth of silk and nylon 6 fabrics dyed with both of the acid dyes regardless of the teated time and plasma gases. It seems that low-temperature plasma by atmospheric-pressure discharge is effective for improvement of dyeing of wools as is the same way with the low-temperature plasma by glow discharge. The kinds of plasma gases and treated time did not influnce the depth of wool fabric pretreted with the atmosperic low-temperature plasmas.

  • PDF

버섯 발생이 부진한 표고골목 내부균사의 생리적 특성 및 해균 조사 (Investigation of Harmful Microorganisms and Physiological Characteristics of Mycelia in the Bed-log of Shiitake Strains Showing Low Fruit-body Productivity)

  • 박원철;이봉훈;유성열;가강현
    • 한국균학회지
    • /
    • 제34권2호
    • /
    • pp.88-91
    • /
    • 2006
  • 가평에서 낮은 생산성을 보이는 저온성 품종과 고온성 품종의 균사상태 및 골목 표면에 형성된 해균에 대한 조사를 시도했다. 순수배지에서의 균사생장력을 조사한 결과, 저온성 균주는 분리균에 비해 보존균의 생장력이 1.1% 정도 떨어지는 것으로 나타났으며, 고온성 균주는 분리균의 생장력이 보존균의 생장력에 비해 8.0% 정도 떨어지는 것으로 나타났다. 톱밥배지에서의 균사생장력을 조사한 결과, 고온성 분리균은 보존균에 비해 10.8%정도 생장력이 떨어졌으며, 저온성 분리균은 보존균에 비해 25.1% 떨어지는 것으로 나타났다. 중량감소율 조사결과, 고온성 분리균은 보존균에 비해 20.1% 정도 중량감소율이 낮았으며, 저온성 분리균도 보존균에 비해 19.0%정도 낮은 것으로 나타났다. 무처리에 비해서는 고온성 보존균이 107.0%, 고온성 분리균이 49.5%, 저온성 보존균이 85.4%,저온성 분리균이 50.0% 더 감소된 것으로 나타났다. 대치배양한 결과, 고온성 분리균과 저온성 분리균 모두 각각의 해당 보존균들과 동일한 균주임을 확인할 수 있었다. 또한 골목에서 검은혹버섯(Hypoxylon truncatum), 구름버섯(Coriolus versicolor), 기와층버섯(Inonotus xeranticus), 삼색도장버섯(Daedaleopsis tricolor), 이중껍질버섯(Graphostroma platystoma), 점균류(Myxomycetes) 2종, 푸른 곰팡이(Trichoderma sp.), Hypoxylon fragiforme, Hypoxylon howeianum, Nitschkia confertula 등 총 11종의 해균이 발견되었으며, 골목들의 상태는 좋지 않았다.

숙성온도가 된장의 품질에 미치는 영향 (Effect of Fermentation Temperature on Quality of Doenjang)

  • 김문석;김은미;장규섭
    • 농업과학연구
    • /
    • 제35권1호
    • /
    • pp.1-9
    • /
    • 2008
  • 메주를 만들 때 저온숙성의 경우 상온숙성보다 발효 특성과 관련이 있는 pH, 아미노산성 질소 등의 양이 낮았으며 동일한 아미노태 질소 함량에 도달하기까지 숙성기간이 약 2~3배정도 필요한 것으로 나타났고, 된장의 색상이 약 2배정도 밝은 것으로 나타났다. 그리고 숙성초기 낮은 온도로 인해 산성생균의 활동성이 낮아지고 이로 인한 유기산 생성량이 낮아져 상온숙성 된장에 비해 pH가 높고, acidity I이 낮으며, 저온숙성된장은 가수분해 효소에 의한 분해속도의 저하로 낮은 아미노산성 질소 함량을 보였다.

  • PDF

비병원성 Bacteriocin 생성 Pseudomonu solonueomm의 저온성 균주를 이용한 담배 세균성마름병 방제효과 (Biological Control Effect of Treating Avirulent Bacteriocin-Producing Strain of Pseudomonas sozanacearum Adapted to Low Temperature on Tobacco Bacterial Wilt)

  • 이영근;손준수
    • 한국연초학회지
    • /
    • 제15권1호
    • /
    • pp.26-33
    • /
    • 1993
  • Effect of an avirulent bacteriocin-producing strain(ABPS) of Pseudomonas solanacearum adapted to low temperature on the control of tobacco bacterial wilt was examined under the natural field conditions. The ABPS of p. solanacearum were succeeding-cultured at gradually low temperature, 3$0^{\circ}C$ to 13$^{\circ}C$. The isolates adapted to low temperature grew faster than the wild type either in artificial media or on the tobacco rhizoplane. The control effect of one of the isolates on bacterial wilt was higher than that of the wild type when the bacterial suspension had been poured onto the tobacco rhizosphere soil on 1 day before and 15 days after transplanting to the field. It was suggested that ABPS of p. solanaceamm adapted to the low temperature, might be more effective biological control agent than the wild type.

  • PDF

양모직물의 염착농도에 미치는 저온플라즈마 처리의 영향 (Effect of Low Temperature Plasma Pretreatment on the Color Depth of Wool Fabrics)

  • 배소영;이문철
    • 한국염색가공학회지
    • /
    • 제4권2호
    • /
    • pp.76-83
    • /
    • 1992
  • Wool tropical and nylon taffeta were treated with low temperature plasma of $O_2$, $N_2$, NH$_3$, CF$_4$ and CH$_4$ for the intervals of 10 to 300 sec, and then dyed with leveling and milling type acid dyes in presence or absence of buffer solution. From the color depth of dyed fabrics, effect of plasma gases, treated time, dyeing time and temperature on dyeing property was studied. The results of the experiment can be summarized as follows: 1) The plasma treatments except methane gas increased the color depth of dyed wool fabrics, but not that of dyed nylon fabrics regardless of the plasma gases used. 2) The color depth of wool fabrics dyed in the dye bath without buffer solution was increased by the low temperature plasma, especially increased much more by CF$_4$ plasma treatment. It is found that with the identification of F- ion in the residual dye bath the hydrogen fluoride gas was adsorbed on wool fabrics in the plasma treatment. 3) The color depth of wool fabrics was increased with the time of $O_2$ and CF$_4$ plasma treatments. 4) In both cases of the leveling and milling type acid dyes, the rate of dyeing was increased in the low temperature plasma treatments, and it is found that the leveling type acid dye increased the color depth at relatively low temperature below 4$0^{\circ}C$, compared with the milling type acid dye.

  • PDF

Selective Catalytic Reduction (SCR) 환경에서 18% 크롬 스테인리스강의 부식 거동 (Corrosion behaviors of 18Cr Stainless Steels in Selective Catalytic Reduction Environments)

  • 김희산
    • Corrosion Science and Technology
    • /
    • 제22권3호
    • /
    • pp.175-186
    • /
    • 2023
  • Effects of high-temperature environment and low-temperature environment on corrosion behaviours of 18Cr stainless steels (type 304L, type 441) in simulated selective catalytic reduction (SCR) environments were studied using weight loss test in each environment and rust analysis. With time to exposure to the high-temperature environment, type 441 was more resistant to corrosion than type 304L due to both higher diffusivity of Cr and lower thermal expansion coefficient in α-iron. The former provides a stable protective Cr2O3 layer. The latter leaded to low residual stress between scale and steel, reducing the spallation of the scale. With time to exposure to the low-temperature environment, on the other hand, type 304L was more resistant to corrosion than type 441. The lower resistance of type 441 was caused by Cr-depleted zone with less than 11% formed during the pre-exposure to a high-temperature environment, unlike type 304L. It was confirmed by results from the crevice corrosion test of sensitised 11Cr steel. Hence, to achieve higher corrosion resistance in simulated SCR environments, ferritic stainless steels having lower thermal expansion coefficient and higher diffusivity of Cr but containing more than 18% Cr are recommended.

Rapid S-N type life estimation for low cycle fatigue of high-strength steels at a low ambient temperature

  • Feng, Liuyang;Qian, Xudong
    • Steel and Composite Structures
    • /
    • 제33권6호
    • /
    • pp.777-792
    • /
    • 2019
  • This paper presents a new efficient approach to estimate the S-N type fatigue life assessment curve for S550 high strength steels under low-cycle actions at -60℃. The proposed approach combines a single set of monotonic tension test and one set of fatigue tests to determine the key material damage parameters in the continuum damage mechanics framework. The experimental program in this study examines both the material response under low-cycle actions. The microstructural mechanisms revealed by the Scanning Electron Microscopy (SEM) at the low temperature, furthermore, characterizes the effect due to different strain ratios and low temperature on the low-cycle fatigue life of S550 steels. Anchored on the experimental results, this study validates the S-N curve determined from the proposed approach. The S-N type curve determined from one set of fatigue tests and one set of monotonic tension tests estimates the fatigue life of all specimens under different strain ratios satisfactorily.

Convection Effects on PGSE-NMR Self-Diffusion Measurements at Low Temperature: Investigation into Sources of Induced Convective Flows

  • Chung, Kee-Choo;Yu, Hyo-Yeon;Ahn, Sang-Doo
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권6호
    • /
    • pp.1970-1974
    • /
    • 2011
  • The effects of convection on the measurement of the diffusion coefficients of liquids by the pulsed gradient spin echo (PGSE) NMR method at low temperature are discussed. To examine the generation of convective flows, we used four different types of sample tubes in the diffusion measurements with temperature variation; a normal 5 mm NMR tube, a Shigemi tube, an ELISE type tube, and a capillary tube. Below room temperature, the calculated diffusion coefficients of chloroform in 5 mm o.d. type tubes increased with decreasing temperature, while those in the capillary tube decreased linearly. The convective flow was found to be significant even at low temperature and it seemed to be mainly induced by the transverse temperature gradient. It was also found that the capillary tube was most appropriate to measure the diffusion coefficients, since its small diameter is effective in suppressing the convective flows at both high and low temperatures.

삼중효용 흡수사이클의 성능특성 평가 (evaluation of Performance Characteristic on Triple Effect Absorption Cycle)

  • 권오경
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제22권6호
    • /
    • pp.782-791
    • /
    • 1998
  • This paper presents a computer simulation of five types of triple effect absorption cycles employ-ing the refrigerant absorbent combinations of NH3/LiNO3 low-pressure type NH3/LiNO3+H2O/LiBr binary two-stage type series flow cycle and two types of parallel flow cycle for H2O/LiBr. The absorption systems is investigated through cycle simulation to obtain the system characteristics with the cooling water inlet temperature approach temperature of absorber loss temperature of absorber and chilled water outlet temperature. The most important characteristic temperature of absorber and chilled water outlet temperature. The most important characteristic of NH3/LiNO3 low-pressure type and a NH3/LINO3+H2O/LiBr binary two-stage type is that it obtains a coefficient of performance higher than the sum of the performance coefficients of its part operating independently. As a result of this analysis the optimum designs and operating conditions were determined based on the operating conditions and the coefficient of performance.

  • PDF

Neutral Beam assisted Chemical Vapor Deposition at Low Temperature for n-type Doped nano-crystalline silicon Thin Film

  • 장진녕;이동혁;소현욱;유석재;이봉주;홍문표
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.52-52
    • /
    • 2011
  • A novel deposition process for n-type nanocrystalline silicon (n-type nc-Si) thin films at room temperature has been developed by adopting the neutral beam assisted chemical vapor deposition (NBa-CVD). During formation of n-type nc-Si thin film by the NBa-CVD process with silicon reflector electrode at room temperature, the energetic particles could induce enhance doping efficiency and crystalline phase in polymorphous-Si thin films without additional heating on substrate; The dark conductivity and substrate temperature of P-doped polymorphous~nano crystalline silicon thin films increased with increasing the reflector bias. The NB energy heating substrate(but lower than $80^{\circ}C$ and increase doping efficiency. This low temperature processed doped nano-crystalline can address key problem in applications from flexible display backplane thin film transistor to flexible solar cell.

  • PDF