• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.16-22
• /
• 2011

Recently, the use of portable projector expands applications to meeting at fields. Accordingly, the projection is not always guaranteed on white screen, causing some color distortion. Several algorithms have been suggested to correct the projected color on the light colored screen. These have limitation on the use of measurement equipment which can't bring always. In this paper, color correction method using general still camera as convenient measurement equipment is proposed to match the colors between on white and colored screens. A patch containing 9 ramps of each channel are firstly projected on white and colored screens, then captured by the camera, respectively, Next, digital values are obtained by the captured image for each ramp patch on both screens, resulting in different values to the same patch. After that, we check which ramp patch on colored screen has the same digital value on white screen, repeating this procedure for all ramp patches. The difference between corresponding ramp patches reveals the quantity of color shift. Then, color correction matrix is obtained by regression method using matched values. In the experimental results, the proposed method gives better color correction on the objective and subjective evaluation than the previous methods.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.4
• /
• pp.223-231
• /
• 2014

In order to prevent the spread of non-indigenous aquatic species through the ballast water in commercial ships, International Maritime Organization (IMO) adopted in 2004 the International Convention for Control and Management of Ship's Ballast Water and Sediments. The Convention mandates treatment of ballast water for most transoceanic voyages and its confirmation of treatment is made with plankton live/dead assay. Fluorescein diacetate assay (FDA), which produces bright green light for live phytoplankton, has been a de facto standard method to determine the survival of marine plankton, but its staining efficacy has been in dispute. In the present study, we examined the limitation of FDA, and compared its efficacy with Neutral red (NR) staining, another promising assay and widely used especially for zooplankton mortality. For all phytoplankton species studied in the present study, except Ditylum brightwellii, the staining efficiency was <50% with FDA. The green FDA fluorescence interfered with phytoplankton autofluorescence in most samples. In contrast, NR assay stained over 90% of both phytoplankton and zooplankton species tested in this study. FDA assay also showed that green FDA fluorescence rapidly faded when phytoplankton cells were exposed to microscope light. Both FDA and NR assay were negative on formalin-killed individuals of both phytoplankton and zooplankton species. Our results suggest that NR assay is more effective for determining the survival of marine plankton and can be applied to test the efficacy of ballast water treatment.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.3
• /
• pp.265-271
• /
• 2021

Nanoparticles are substances that are smaller in size and smaller than cells that make up the skin. Therefore, they are very suitable as mediators for transmitting drugs or genes across cell membranes, and also deliver specific ingredients into the skin.In this study, nanoparticles were extracted from mugwort and particles of around 100 nm were obtained through dynamic light scattering (DLS), and the results of concentration-dependent enhancement of cell viability in fibroblasts were obtained through MTT assay. In addition, it was confirmed that the COL1A1 mRNA expression level was increased and the IL-6 mRNA expression level was decreased through the quantitative real-time PCR analysis method. Moreover, as these nanoparticles were confirmed to be stable, they can be applied not only to cell experiments but also to cosmetic formulations. While the demand for plant-derived ingredients continues to increase, excluding chemical ingredients from the recent cosmetics industry trend, there is a limitation in that there are few research results suggesting the application field of plant-derived nanoparticles. Therefore, in order to overcome the limitations of the cosmetic industry at the present time, the results obtained in this study present nanoparticles derived from Artemisia princeps (NDAP) as a highly functional cosmetic material.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.225-231
• /
• 2019

Purpose: This study was undertaken to compare fracture and flexural strength of provisional restorative resins fabricated by additive manufacturing, subtractive manufacturing, and conventional direct technique. Materials and methods: Five types of provisional restorative resin made with different methods were investigated: Stereolithography apparatus (SLA) 3D printer (S3Z), two digital light processing (DLP) 3D printer (D3Z, D3P), milling method (MIL), conventional method (CON). For fracture strength test, premolar shaped specimens were prepared by each method and stored in distilled water at $37^{\circ}C$ for 24 hours. Compressive load was measured using a universal testing machine (UTM). For flexural strength test, rectangular bar specimens ($25{\times}2{\times}2mm$) were prepared by each method according to ISO 10477 and flexural strength was measured by UTM. Results: Fracture strengths of the S3Z, D3Z, and D3P groups fabricated by additive manufacturing were not significantly different from those of MIL and CON groups (P>.05/10=.005). On the other hand, the flexural strengths of S3Z, D3P, and MIL groups were significantly higher than that of CON group (P<.05), but the flexural strength of D3Z group was significantly lower than that of CON group (P<.05). Conclusion: Within the limitation of our study, provisional restorative resins made from additive manufacturing showed clinically comparable fracture and flexural strength as those made by subtractive manufacturing and conventional method.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.107-118
• /
• 2021

Scan-to-BIM can be precisely mod eled by measuring structures with Light Detection And Ranging (LiDAR) and build ing a 3D BIM (Building Information Modeling) model based on it, but has a limitation in that it consumes a lot of manpower, time, and cost. To overcome these limitations, studies are being conducted to perform semantic segmentation of 3D point cloud data applying deep learning algorithms, but studies on how segmentation result changes depending on learning data are insufficient. In this study, a parametric study was conducted to determine how the size and track type of railroad tunnels constituting learning data affect the semantic segmentation of railroad tunnels through deep learning. As a result of the parametric study, the similar size of the tunnels used for learning and testing, the higher segmentation accuracy, and the better results when learning through a double-track tunnel than a single-line tunnel. In addition, when the training data is composed of two or more tunnels, overall accuracy (OA) and mean intersection over union (MIoU) increased by 10% to 50%, it has been confirmed that various configurations of learning data can contribute to efficient learning.

• Journal of Ecology and Environment
• /
• v.32 no.2
• /
• pp.87-96
• /
• 2009

Pinus thunbergii plantations in Pohang-si, Gyeongsangbuk-do, Korea, are of low ecological quality, with arrested succession and a high proportion of ruderal species. To improve the quality of the habitat, we created canopy gaps ($\sim42\;m^2$) and monitored changes in abiotic (light availability, canopy openness) and biotic (survival and growth of seedlings and understory communities) variables in 2007 and 2008 in plots that had received one of five types of treatment: cutting of canopy trees and removal of the understory (CU), cutting of canopy trees only (C), girdling of canopy trees and removal of the understory (GU), girdling of canopy trees (G) or control. Each treatment was applied to three replicate plots. Abiotic variables did not significantly differ among treatments. Survival rates of target species were slightly lower in the CU, G and control conditions. Based on logistic regression analysis, the only significant growth factor affecting survival was height growth. Positive effects of seedling height and leaf area growth on survival were also detected, but did not reach statistical significance. In treatment G, gradual improvement of overstory conditions and mitigation of competition by limitation of disturbance to the understory community were likely to have promoted seedling growth. There were no significant effects of gap treatments on changes in species abundance (cover and richness) and composition of understory between the study years. This result implies that the small gaps created in our study may be below the threshold size to affect understory growth. However, the results of this study are based on a short-term investigation of only two years. Long-term research is strongly recommended to clarify the effects of gap treatment on plant communities in afforested areas.

• Journal of Digital Convergence
• /
• v.18 no.6
• /
• pp.99-108
• /
• 2020

This study aimed to investigate beginner-level learners' use of translators in L2 writing, and shed light on its validity in writing performance through their responses on the necessity, reliability and limitation of machine translation. 117 university students from beginner-level L2 writing classes participated in the survey. Additionally, 11 of them were interviewed about their answers. The survey and interview data revealed varying viewpoints such as reliability and effects as well as reasons for choosing translator-assisted writing. The vast majority(76.1%) used web-based machine translators for their writing activities, and employed various strategies to help their insufficient L2 skills and to increase their motivation and confidence. On the other hand, they exhibited its detrimental effects including it could lead to plagiarism, and interfere with the learning process unless they post-edited the given translation. However, translators were viewed as a new, efficient, and valid educational tool for effective and successful L2 writing.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.7-14
• /
• 2012

We frequently confront with cars interfering into our lane on the ramp. We suffered from serious traffic congestion due to the interfering cars. But the police enforcement has not done actively because it's hard to enforce. In this study, we have evaluated the systems to enforce cutting-in cars through the field test. Generally, the image processing method depends on the weather. To overcome this limitation we proposed a new algorithm combined with section detection method. In the filed test we concluded the results as follows. Whereas the violation detection rate of the general image processing was 58.2%, a new algorithm proposed by this study was 74.5%. And, an error rate enforcing vehicles that do not violate was 0.0%. Also, we can use the existing facilities, such as street light because of compact and lightweight systems which are integrated camera with controller. Therefore, we concluded that it is possible to enforce the interfering Cars using vehicle enforcement systems.

• Journal of the Korean Society of Costume
• /
• v.65 no.6
• /
• pp.112-132
• /
• 2015

Banya was a concubine slave of Shindon(辛旽) who was a powerful monk in late Goryeo Dynasty, as well as the mother of King Woo(禑王), a successor of King Gongmin(恭愍王). This study was undertaken to investigate the sources of costume for Banya. The study focused on the features of Buddhist service costume, street wear, and daywear for common women's costume during the prime age of the Buddhist culture. The study looked into Buddhist paintings, old documents, advanced research, and relics. There are three characteristics of historically investigated Buddhist service costume for Banya: Dallyeongpo(團領袍), long Jeogori made with black Ra(羅), and Jeogori with a long scarf. Skirt, under Jeogori, under skirt, Cho, Ra(羅), Neung (綾), Dan(緞), patterned ramie(紋紵), and Tapja(塔子) were included in all Buddhist service costume. And, street wear consisted of Women's Dapho(婦人搭忽), long Jeogori, skirt, underwear and black Ra beil(蒙首). Daywear consisted of Banbi(半臂), long Jeogori, and skirt, underwear made with cheap fabric, Ju(綢), ramie, and imported cotton. Plumper hair, silver comb and Biyeo, lining of light pink-colored thin silk(小紅薄絹), bronze openworked ornament that fixed the outerwear's opening, bronze needle case, Sutra box and heated gemstone could be matched for the Buddhist service costume. Bronze and heated gemstone could be used for ornaments of street wear and daywear. The investigation of ornaments was carried on by referring to presentation of overseas collections. Considering the limitation of the study on Goryeo costume due to the lack of research material, future studies including much more relics in oversea collections needs to be undertaken.

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.293-298
• /
• 2003

The development of the crystalline structure of poly(trimethylene terephthalate) (PTT) in a confined geometry was investigated with optical microscope, small angle light scattering, and X-ray diffraction. The rejected distance, which was represented in terms of the parameter $\delta$, played an important role in determining the morphological patterns of poly (ethylene terethphalate) (PET/PTT) blend. In case of stepwise crystallization, the crystallization of PTT commenced in the interspherulitic region between the grown PET crystals and proceeded until the interspherulitic space was filled with the PTT crystals. The spherulitic surface of the PET crtstals acted as the nucleation sites where the PTT molecules preferentially crystallized, leading to the formation of transcrystalline structure. As a result, a mixed morphological pattern was observed in the PTT-rich phase: one was a typical spherulitic texture and the other was a transcrystalline texture. Some of the molecular conformations of PTT, which could adopt in the absence of the space limitation, were probably forbidden in the interlamellar and/or interfibrillar regions of the PET spherulite. This constraint was responsible for difference in the crystallization and melting behavior of PTT between the intra and interspheulitic regions of PET.