• Macromolecular Research
• /
• v.14 no.6
• /
• pp.640-645
• /
• 2006

Polyethylene of bimodal molecular weight distribution was irradiated with an electron beam. The thermal and mechanical properties were examined by DSC, small and wide angle X-ray scattering and static tensile test according to the crystal morphology of the irradiated samples. The crystal morphology change upon irradiation, as revealed by wide angle X-ray scattering, correlated well with the changes in melting enthalpy, whereas the lamellar thickness and the amorphous gap thickness remained virtually unchanged at irradiation doses up to 500 kGy. Crosslinks in the crystal domains became evident at an energy level of 250 kGy, resulting in reduced crystallinity and crystal size of the (110) and (200) planes. The samples became stiff and brittle with increased irradiation dose, which seem to be more relevant to the amount of cross links than the crystal morphology changes.

• Macromolecular Research
• /
• v.8 no.3
• /
• pp.103-115
• /
• 2000

The structural changes viewed from the molecular level have been investigated for the isothermal crystallization phenomena of polyethylene (PE) and the solvent-induced crystallization phenomenon of syndiotactic polystyrene (sPS) glassy sample. The data, which were collected by the time-resolved measurements of Fourier-transform infrared spectra, Raman spectra, synchrotron-sourced small-angle X-ray scattering, wide-angle X-ray scattering, and so on, were combined together to extract the detailed structural information in these phase transition phenomena. In the case of PE, the isothermal crystallization from the melt to the orthorhombic form was found to occur via the conformationally-disordered trans chain form, followed by the formation of the lamellar stacking structure of regular orthorhombic-type crystals. In the case of sPS, the amorphous chains in the glassy sample were found to enhance the mobility through the interaction with the injected solvent molecules, which act as a trigger to cause the conformational ordering from the random coil to the regular T$_2$G$_2$-type helical form. The thus created short helical segments were found to grow into longer helices, which gathered together to form the crystallites, as revealed by the organized coupling of the infrared, Raman and X-ray scattering data.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.1
• /
• pp.3-10
• /
• 1994

The structure and mechanical properties of the extruded specimens were investigated in rapid solidified Al-(1, 3, 5) Cr alloys after mechanical alloying. Finer lamellar microstructure could no longer be resolved in the bars obtained by extrusion of the spherical particles after 200 min. of processing time. The structure of extruded bars are highly depended on the processing time of splats. The isothermal annealing of the extruded bars showed that all the alloys had good thermal stability up to $400^{\circ}C$ and did not show the recrystallization phenomena. Severe working of Al-(1, 3, 5) Cr splats produced a very fine grain size and substructural strengthening (high dislocation density and fine grain size). Effects of mechanical alloying on the thermal stability of the extruded bars Al-(1, 3, 5) Cr alloys decreases, with increasing Cr content. But the ultimate tensile Strength in the extruded bars increases with increasing Cr content.

• Journal of fish pathology
• /
• v.2 no.2
• /
• pp.75-82
• /
• 1989

Dactylogyrosis due to Dactylogyrus sp. occured among cultured sea bass (Lateolabrax japonicus) in Geoje, Kyoung Nam Prefecture in July, 1988. Descriptions are given of the opisthohaptor, copulatory organ and also of the structures in Dactylogyrus sp.. Dactylogyrus sp. have one pair of minute anchor (length : $15-22{\mu}m$) and 14 larger hooks. Histopathological changes of the heavily infested gills are showed necrosis, epithelium of the gill filaments underwent hyperplasia with fusion of the lamellae and filamental clubbing. And a bacterial colony is invaded on the surface of lamellar epithelium.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.997-1004
• /
• 1995

Intermetallic compound NbAl₃and amorphous phases were synthesized by mechanical alloying of elemental powder mixtures of niobium and aluminum. The composition of the powder mixtures was Nb-45wt%Al(75at%Al). The mechanical alloying was performed with a high energy SPEX 8000 mixer/mill up to 72 hrs. The resulting powders were analyzed by XRD, DTA, SEM and TEM. The mechanically alloyed powders exhibited lamellar structures in the early stage. And the elements of Nb and Al were homogeneously distributed over the Powder when a steady state was reached. An intermetallic compound, NbAl₃, was formed by mechanical alloying for 4 hrs. The mechanically alloyed powders exhibited a large exotherm around 600℃, corresponding to formation of stable NbAl₃and stress relief.

• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.177-186
• /
• 1994

The effect of solidification condition and vibration on structure refinement was investigatedfor unidirectionally solidified $AI-CuAI_{2}$ eutectic composites. Eutectic composites were unidirectionally solidifiedunder vibration with variation of growth rates (R) and thermal gradient((G), $32^{\circ}C$/cm, and 35$^{\circ}C$/cm. The lamellar structure was varied according to growth condition(G/R ratio). For the structure refinementthe effect of G/R was found out to be greater rather than that of vibration. The interlamellarspacing(l) in this materials was varied with the growth rates(R) by "$\lambda^{2}R$=Constant" relationshipquot; relationship

• Korean Journal of Materials Research
• /
• v.13 no.6
• /
• pp.381-388
• /
• 2003

Directional solidification experiments were carried out at 0.5-150 $\mu\textrm{m}$/s in the Co-base superalloy ECY 768. As increasing solidification rate, the dendrite length increased and it reached the maximum at 150 $\mu\textrm{m}$/s, where the tip temperature is close to the liquidus. The liquidus and eutectic temperatures could be estimated by comparing the dendrite lengths and the temperature gradients at the solid/liquid interface and those were estimated as $1424.6^{\circ}C$ and $1343^{\circ}C$ respectively. Between the dendrites just below final freezing temperature, MC carbide and $M_{23}$$C_{6}$ carbide were found. It was confirmed that the script or blocky shape was Ta or W-rich MC carbide, and the lamellar shape was Cr-rich eutectic carbide. The solid/liquid interface morphology clearly showed that the Cr-rich eutectic carbide formed just after the script type MC carbide.

• Journal of Powder Materials
• /
• v.19 no.4
• /
• pp.317-321
• /
• 2012

In this study, Cu-5Ni-10Sn(wt%) spinodal alloy was manufactured by gas atomization spray forming, and the microstructural features and mechanical properties of Cu-5Ni-10Sn alloy have been investigated during homogenization, cold working and age-hardening. The spray formed Cu-5Ni-10Sn alloy consisted of an equiaxed microstructure with a mixture of solid solution ${\alpha}$-(CuNiSn) grains and lamellar-structure grains. Homogenization at $800^{\circ}C$ and subsequent rapid quenching formed a uniform solid solution ${\alpha}$-(CuNiSn) phase. Direct aging at $350^{\circ}C$ from the homogenized Cu-5Ni-10Sn alloy promoted the precipitation of finely distributed ${\gamma}$' or ${\gamma}-(Cu,Ni)_3Sn$ phase throughout the matrix, resulting in a significant increase in microhardness and tensile strength. Cold working prior to aging was effective in strengthening Cu-5Ni-10Sn alloy, which gave rise to a maximum tensile strength of 1165 MPa. Subsequent aging treatment slightly reduced the tensile strength to 1000-1100 MPa due to annealing effects.

• Applied Microscopy
• /
• v.25 no.1
• /
• pp.30-47
• /
• 1995

The ultrastructural changes of adrenal chromaffin cells and ganglion cells in the adrenal gland of vacor-induced diabetic Mongolian gerbils were studied by electron microscopy. After one month of vacor-induced diabetes, some chromaffin cells were filled with dense bodies and large cytosomes with formy contents. Most of degenerating axon terminals were observed on chromaffin cells. A few macrophages were found among chromaffin cells at one month after induction. Several of these macrophages were filled with numerous phagosomes. After one month of vacor-induced diabetes, the ganglion cells showed increase in numbers of dense bodies and degenerating dendrites compared with the normal ganglion cells. Both electron dense and lucent types of degenerating axon terminals were found in interstitial space of the ganglion cells. Degenerating unmyelinated and myelinted axons contained dense and lamellar bodies. The satellite cells and macrophages with engulfed degenerated axon terminals were observed. After three months of vacor-induced diabetes, the unmyelinated and myelinated axons showed degenerative changes, whereas no structural changes could be demonstrated in adrenal ganglion and chromaffin cells. The satellite cells and macrophages containing partially digested debris were still commonly observed in the interstitial space of adrenal medulla. These results suggest that the degenerative changes occur in the adrenal ganglion cells as well as adrenal chromaffin cells of vacor-induced diabetic Mongolian gerbils.

• Applied Microscopy
• /
• v.18 no.1
• /
• pp.49-59
• /
• 1988

Fine structures of the testis and vas deferens in the fall-web worm, Hyphantria cunea Drury, are studied with electron microscope. Adult worms have single testis close to the midlines of the abdomen. Testis is composed of 4 follicles which are incompletly separated from each other and bounded together by a peritoneal sheath. The peritoneal sheath consisted of outer cuticular layer and two kinds of inner layers, in which glycogen particles are dispersed commonly. These two layers are divided by the morphology of cytoplasmic granules. Follicular epithelium forming the wall of the follicles have melanin pigment granules, and trachea or tracheoles are extended through this epithelium. In the cysts of adult testis, matured spermatozoa are grouped together in bundles and after releasing the sperm bundles to the vas deferens, lamellar shaped lysosomes appeared in the cytoplasms of the cyst cells. The number of spermatozoa per cyst is exactly 256 ($2^8$), this number is characteristics of the Lepidoperan species. Vas deferens is a tube with a fairly thick bounding epithelium, a basement membrane and a layer of circular muscle outside it. At the apical portion of the epithelial cells, microvilli are well developed. And in the cytoplasms of these cells, numerous excretory granules are observed.