• Journal of the Korean Society of Physical Medicine
• /
• v.3 no.2
• /
• pp.97-102
• /
• 2008

Purpose : The purpose of this study was to find the effect of foot bath on blood pressure(BP) following treadmill exercise. Methode : Subject of study were forty healthy males without any cardiovascular, musculoskeletal, and neurologic diseases. Following twenty minutes walking at a speed of 5m/s on the treadmill, ten twenty subjects in experimental group received foot bath, on the dominant lower limb while sitting in chair. Foot bath was applied to the level of the lateral and medial malleoli keeping the temperature of the paraffin bath at $40{\pm}0.5^{\circ}C$. Twenty subjects in control group took a rest sitting in chair in a comfortable position. BP was measured in right brachial artery. BP was measured five times(before exercise, immediately after exercise, 5 minutes, 10 minutes, and fifteen minutes after exercise). Results : The study showed that for diastolic blood pressure, there was no significant difference between the experimental and the control group. However, systolic blood pressure(SBP) increased significantly after exercise compared with SBP before exercise (p<.05). In addition, SBP in five minutes after exercise decreased significantly compared with SBP in immediately after exercise (p<.05). On the other hand, the control group had significant difference between SBP measured before exercise and SBP measured at the other measure time (p<.05). In five minutes after exercise, SBP in experimental group had significant difference with SBP in control group (p<.05). Similarly, in ten and fifteen minutes after exercise, SBP in experimental group had significantly difference with SBP in control group (p<.05). Conclusion : Consequently it was confirmed that when foot bath was applied, the increased BP induced by the exercise returned to normal range rapidly.

• Korean Journal of Community Nutrition
• /
• v.15 no.3
• /
• pp.369-378
• /
• 2010

School lunch programs at middle schools have increased in quantity. However, the quality of them is in fact not enough to reach the satisfactory standard, especially in the aspect of environment of school meals. It is true that there seems to be little attention to the environment. In this study, degree of satisfaction about school lunch program was surveyed for students in one middle school. Focus of survey was sanitary condition about the dining room and classroom where they have lunch. First, in order to investigate the degree of satisfaction about their dining place, questionnaire was sent out to the students at one middle school in Seoul. Questionnaire was made with reference to previous research. Second, for the study on environmental sanitation, dropping bacteria (general bacteria) is measured in three parts of dining place (entrance, serving table, dining table). Petriplate film was exposed to the responsible places for 15 minutes and then cultivated at the temperature of $32^{\circ}C$ for 48 hours before counting the number of bacteria formed. For the statistical analysis, SPSS 12.0 was used. The results of the study show that students had more satisfaction in dining room service than in classroom service. Important factors for the meal program such as "taste of food", "amount of food per student", "state of keeping warm", "appearance of food", "diversity of menu", and "kindliness of feeding staff" had more points in dining room than in classroom. For the environmental and sanitary aspect, the result of dropping bacteria (general bacteria) in dining room and classroom showed that table (5.00) and fooddistribution corner (8.67) of dining room were cleaner than those of classroom (P < 0.05). Making a good environment for school feeding will have a positive effect on the improvement of satisfaction and sanitation of school feeding. There should be expansion of dining room service for the students.

• Analytical Science and Technology
• /
• v.30 no.2
• /
• pp.75-81
• /
• 2017

5-methylthioninhydrin (5-MTN) is an amino acid sensitive reagent used for the development of latent fingermarks deposited on porous surfaces such as paper and wood. The present study demonstrates that the 5-MTN can be used as a latent footwear impression enhancement reagent, by reacting with trace multivalent metal ions, which are the main components of the latent footwear impression. 5-MTN and L-alanine complex (MTN-ALA) used for the latent footwear impression development was prepared, by mixing $4.5{\times}10^{-3}M$ 5-MTN (in methanol) and $4.5{\times}10^{-3}M$ L-alanine (in methanol) in 1:1 ratio, and keeping undisturbed at room temperature for 24 h. The latent footwear impressions were deposited on white and black non-porous surfaces (glass plate, polyethylene panel, polypropylene panel, acryl panel, polyvinyl chloride (PVC) panel, poly(methyl methacrylate) (PMMA) panel, acrylonitrile-butadiene-styrene (ABS) panel, tile), and a semi-porous surfaces (painted wood). The latent footwear impressions on these surfaces were treated with MTN-ALA complex by spraying. The fluorescence of footwear impressions (occurred due to the reaction between MTN-ALA and metal complexes) was observed under a 505 nm forensic light source and an orange barrier filter. The enhancement of latent footwear impression was achieved from black surfaces without any blurring. However, the fluorescence (enhancement) of footwear impression was not observed on the white PVC, PMMA, and ABS surfaces, because the incident light interfered and reflected on the surface. The sensitivity of MTN-ALA was superior to 2,2'-dipyridil, which is a representative non-fluorescing footwear impression enhancement reagent, and similar to 8-hydroxyquinoline, which is a representative fluorescing footwear impression enhancement reagent.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.8
• /
• pp.1133-1139
• /
• 2013

Enzymatic decomposition of gelatin layers on used X-ray films and repeated utilization of the enzyme for potential application in silver recovery were investigated using keratinolytic serine proteases from Purpureocillium lilacinum LPS # 876. At pH 9.0, the enzymatic reaction was enhanced by the increase of enzyme concentration or by the increase of the temperature up to $60^{\circ}C$. Under the conditions of 6.9 U/ml, $60^{\circ}C$, and pH 9.0, hydrolysis of the gelatin layers and the resulting release of silver particles were achieved within 6 min. The protective effect of polyols against thermal denaturation was investigated. The presence of glycerol and propylene glycol increased enzyme stability. When the reusability of the enzyme for gelatin hydrolysis was tested, it could be seen that it could be effectively reused for more cycles when glycerol was added, compared with the enzyme without protective agents. The results of these repeated treatments suggested that a continuous process of recycling silver from used X-ray is feasible. Keeping in mind that recycling is (at the present time) needed and imperative, it can be remarked that, in this research, three wastes were successfully used: hair waste in order to produce serine proteases; glycerol in order to enhance enzyme thermal stability; and used X-ray films in order to recover silver and PET films.

• Elastomers and Composites
• /
• v.34 no.3
• /
• pp.229-238
• /
• 1999

In this study, double bond, unsaturated group was introduced to the main chain of EVA by chemically treating EVA, nondiene polymer. Benzene sulfonic acid, ENB and DCPD were used as a third element. Also, from blending CR and SBR, conventional synthetic rubber we prepared vulcanizates and examined their physical properties. The datum lead to the following conclusion that some problems were modified; limited temperature in use and mechanical properties like hardness, tensile strength, tensile stress, and elongation rate of thermoplastic EVA, keeping the following advantages of original EVA; green strength, injection molding by Pressure, adhesion, tackiness, dimensional stability, and ozone resistance, etc. It is expected that continuous research of the modification between nondiene and diene polymer will improve what were shown disadvantages in synthetic polymer; processing, oxidation resistance, and adhesion. In addition, it will be possible to continue process of rubber products by utilizing possible fluidity for fusion of EVA.

• Journal of Haehwa Medicine
• /
• v.14 no.2
• /
• pp.113-126
• /
• 2005

Atopic dermatitis(AD) is a chronic disease that affects the skin. "Atopic" refers to a group of diseases where there is often an inherited tendency to develop other allergic conditions, such as asthma and hay fever. In AD, symptoms vary from person to person. The most common symptoms are dry, itchy skin and rashes on the face, inside the elbows and behind the knees, and on the hands and feet. Although AD may occur at any age, it most often begins in infancy and childhood. The cause of AD is not known, but the disease seems to result from a combination of hereditary and environmental factors along with malfunction of the body's immune system. In contrast to that, the results from literatual study in oriental medicine are as follows; 1. The causes of AD are considered to be Mosusigisadok(母受時氣毒), Waegampoongsubyeol(外感風濕熱), Guasiksinlayeolmul(過食辛辣熱物), Ohbokonje(誤服溫劑). 2. The symptoms are fever, flushed face, red eyes, oliguria, constipation and itching. 3. Chungyeolhaedok(淸熱解毒) would be the basic method of treatment, and it divides into two categories; Subhyung(濕型) and Gunhyung(乾型). In Subhyung(濕型), AD is treated by Josub(燥濕), Chungyeol(淸熱) and Jiyang(止痒) whereas Chungyeol(淸熱), Jiyang(止痒), Jesub(除濕) in Gunhyung(乾型). 4. To prevent further damage and enhance quality of life, it is necessary to keep the temperature and humidity favorable, and healing the skin and keeping it healthy are important. Developing and sticking with a daily skin care routine is critical to preventing flares. Changing the diet and psychological stability may also be helpful to relieve symptoms of AD.

• Korean Journal of Agricultural Science
• /
• v.25 no.1
• /
• pp.19-25
• /
• 1998

This study was conducted to develop an appropriate postharvest technique to extend the shelf-life of an early cultivar, 'Tsugaru' apples. The general quality of stored fruit was more affected by maturity at harvest than postharvest treatments. When firmness and internal quality were considered, fruits harvested at the medium stage of color development showed better results. Between postharvest treatments examined in this study, a simple polyethylene film(PE) wrapping (30um) was excellent on inhibition of weight loss but this treatment revealed no clear effect on other quality factors including firmness and acidity. Ethylene scrubber(ES) in polyethylene wrapping showed a positive effect on keeping fruit quality in general. Especially acid content was higher in fruit stored with PE + ES, thus, fruit seemed to be better in freshness. A physiological disorder was observed regardless postharvest treatments. The symptom was associated with incidence of pitting on surface and breakdown of the effected tissue. And much more symptoms were developed near the calyx end. Thus, future studies concerning 'Tsugaru' storage should include an examination of the optimum storage temperature.

• KIEAE Journal
• /
• v.4 no.3
• /
• pp.203-210
• /
• 2004

This dissertation identifies and investigates the possible control modes of hybrid ventilation system in applying to general apartments. It evaluates range of hybrid ventilation control modes in terms of indoor air quality, thermal comfort, and energy consumption in a living room and a kitchen of the $1000m^2$ apartment. The TRNSYS simulation program was used for evaluating the following four ventilation types : A ventilation mode relying on only infiltration for supplying air, A natural ventilation mode considering with weather condition, A hybrid ventilation (natural + mechanical ventilation) mode allowing minimum ventilation with no heat exchange, and a hybrid ventilation mode with heat exchange. This study shows the following results. As temperature being controlled by heating cooling equipments, there is without significant difference in thermal performance among ventilation types. Regarding Indoor Air quality, Indoor air contamination level of the hybrid ventilation case consistently keep the lower levels. The hybrid ventilation modes consume more energy by a 49% as compared to the A ventilation mode relying on only infiltration for supplying air. It is caused by the continuous ventilation for keeping good indoor air quality; the increase of energy consumption can be attributable to the increase of the heating energy. Therefore, the heat exchange between indoor and outdoor air is required during heating season in severe weather conditions. During the cooling seasons, Introducing natural ventilation can achieve energy saving by 40 ~ 45%. Thus, it can be an effective strategies for energy saving. Based on these results, a hybrid ventilation system can be suggested as an effective ventilation strategy for archiving high level of indoor air quality, thermal comfort, and energy consumption.

• KIEAE Journal
• /
• v.13 no.5
• /
• pp.67-77
• /
• 2013

Based on the increasing demand for a solution to reduce thermal load, extensive green roofs have great opportunity for application to existing roofs due to their light-weight and easy maintenance. The present study delivers data regarding thermal behavior and heat reduction potential in relation to vegetation coverage between green roof types. 1) In the hottest hour in a day, green roofs showed considerable potential to mitigate heat load in roof environments, which can be up to $10^{\circ}C$ difference. 2) Compared to conventional cement roofs, the extensive green roofs only have a slight potential to cool the air over green roofs. By statistical analysis of linear regression, green coverage has little to do with the reduction of air temperature; the cooling effect was proven only in nighttime. 3) Green roofs act as an insulating roof membrane, the inner substrate of green roofs remained cooler than cement roof surfaces in the daytime, but in the nighttime the green roofs generally were warmer than the cement roof surfaces. 4) The variable of vegetation coverage resulted in no significant difference in thermal behavior in the air, but had the greatest effect in keeping the substrate cool in the daytime. The high vegetation coverage also hindered the rapid cooling of the substrate in the nighttime, and therefore was warmer than other measured temperatures. In order to draw a clear conclusion to combat urban heat island effect with extensive green roofs, the experiment needs to be applied on a larger scale.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.4
• /
• pp.23-28
• /
• 2009

We investigated the wafer-level MEMS capping process for which cavity formation in Si wafer was not required. Ni caps were formed by electrodeposition on 4" Si wafer and Ni rims of the Ni caps were bonded to the Cu rims of bottom Si wafer by using epoxy. Then, top Si wafer was debonded from the Ni cap structures by using SnBi layer of low melting temperature. As-evaporated SnBi layer was composed of double layers of Bi and Sn due to the large difference in vapor pressures of Bi and Sn. With keeping the as-evaporated SnBi layer at $150^{\circ}C$ for more than 15 sec, SnBi alloy composed of eutectic phase and Bi-rich $\beta$ phase was formed by interdiffusion of Sn and Bi. Debonding between top Si wafer and Ni cap structures was accomplished by melting of the SnBi layer at $150^{\circ}C$.